Jump to content
SAU Community

Recommended Posts

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

All

got quotes from Nissan 2day - and I'm looking at ~$900 for  kits to reco all 4 callipers and the master cyl

does that sound right ?

That's about double what it should cost. Shop around some more:cheers:

  • 2 weeks later...

hi guys a good up grade is the csc brakes 343 mm rotors and 355 mm if you have 18 inch wheels the rotors are 32mm thick they run a porshe pad and give great braking and have 24 slot design so they look great to I run these on my r32 gtr and can sell the kits at a good price

eastern creek 1.44

wake feild 1.05

oran park gp 1.19

hi guys a good up grade is the csc brakes 343 mm rotors and 355 mm if you have 18 inch wheels the rotors are 32mm thick they run a porshe pad and give great braking and have 24 slot  design so they look great to I run these on my r32 gtr and can sell the kits at a good price  

eastern creek 1.44

wake feild 1.05

oran park gp 1.19

Hi what tyres were you using for those times? :(

all I have to say is that BRAKES is not spelt breaks... sorry for being so pedantic but it bugs the hell out of me.

also interested in the price on this csc brake upgrade kit.

Does the csc kit use the standard caliper or is it a full kit???

People i would try and rebuild the "BRAKES" ( Thanks aswell Richard) yourselves, as it is quite straight foword provided you have some mechanical knowledge. It will also only cost you about $100 in parts!!!!

Does the csc kit use the standard caliper or is it a full kit???

People i would try and rebuild the "BRAKES" ( Thanks aswell Richard) yourselves, as it is quite straight foword provided you have some mechanical knowledge. It will also only cost you about $100 in parts!!!!

And i'm guessing all you would need is a seal kit, time and some patience?

Roy how much did Racebrakes cost for the seal kit install again?

The Nissan prices are outrageous so give them a miss, but stick with the stockies and give them a freshen. There is a couple of threads here on the perils of spending lots on brakes and you can end up with worse than what you have, especially if you upset the balance of front, rear and master cylinder swept volumes. The GTR's do have ABS so there is some margin.

In all seriousness if you can get them let me know. They are what im looking for as they generally go for the same price as GTR Brembos or in many cases a lot cheaper.

And from what ive been told/read they are far superior. Actually ill know Thursday morning whether i have got my super dooper brake upgrade:whackit:

Not off a Porsche , but off another Supercar and they are farking big...so farking big my car will probably stop worse then it does now...but they are so farkin big ill smile every time i walk up to my car and look at them...did i mention they are farking huge:whackit: :(

...and no im not telling, they are a steal as all the ricers havent caught onto just what they are, so there is no demand meaning they are relatively cheap, so ii have been waiting forever for some to come along, and until i get soem im not sharing my secret:)

Not off a Porsche , but off another Supercar and they are farking big...so farking big my car will probably stop worse then it does now...but they are so farkin big ill smile every time i walk up to my car and look at them...did i mention they are farking huge:whackit: :(

Roy, just so I'm clear on this, are they big or not?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...