Jump to content
SAU Community

Recommended Posts

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

but why would you want to go that fast?

Because he is a Kriminal.

--------

Pay what ever it costs you test your top speed at your local track.

Its a lot safer and will prevent you making the news WHEN not if you get busted.

"Yet another Skyline clocking 200km/h"

Its not some thing we really want to hear.

Now that you have reworded the origional post. :cheers:

That really depends on how much power and rev's you have.

I would say 240-250-260km/h is within reach.

My little old VS Commodore 5 speed with a few mild mods used to only 'just' crack 250km/h so no doubt a mild RB25 which makes around 380hp will be able to crack it also. Depends if you run out of rev's.

Do the Math. :D

The standard soft limit is fifth gear at 5000rpm. at that speed you are doing approx 190kph

If you divide by 5000 and then times it by the redline (7200), you get 273.6kph.

Didnt you learn about ratios in school?

The standard soft limit is fifth gear at 5000rpm.

Soft limit? What's that then? Haven't heard that expression before.

so at 8krpm you'd be nudging just over 300km/h? Must try that out!! (Private closed race track of course. :cheers:

Adrian

 

I would say 240-250-260km/h is within reach.

 

My little old VS Commodore 5 speed with a few mild mods used to only 'just' crack 250km/h so no doubt a mild RB25 which makes around 380hp will be able to crack it also.

You don't even need 250hp to crack 250km/h.
You don't even need 250hp to crack 250km/h.

haha.. Come on buddy.. This is a VS 5ltr Slugger Commodore we are talking about. :P

250km/h is a fair speed, most new cars even the ones making 250hp at the fly would be pushed to get 250km/h.

I was actually referring to the bit where you said "no doubt a mild RB25 which makes around 380hp will be able to crack it also."

...and im saying you dont even need 250hp to crack 250km/h (and you dont even need 7,000+ rpm).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...