Jump to content
SAU Community

Recommended Posts

Anyone know about this?

I suspect the vehicle in question may be "NOTGTS"?

http://www.wrx.com.au/forum/viewtopic.php?t=15666

Ahh shit not another one.... Aparently there was another R33 crash on the eastern freeway too, rolled on it's side.

Also a blue/green S14 which crashed on the Eastern fwy on Wednesday, slammed into a concrete pillar near an underpass.

And ANOTHER R32 spun out on Kingsway... http://www.exclusive-auto.org/forum/viewto...opic.php?t=4016

WTF. for some reason it just pisses me off seeing all these accidents.... but I'm not casting any judgements on what the causes were but I'd suggest the recent weather played a big part.

Ahh shit not another one.... Aparently there was another R33 crash on the eastern freeway too, rolled on it's side.  

Also a blue/green S14 which crashed on the Eastern fwy on Wednesday, slammed into a concrete pillar near an underpass.  

And ANOTHER R32 spun out on Kingsway... http://www.exclusive-auto.org/forum/viewto...opic.php?t=4016

WTF. for some reason it just pisses me off seeing all these accidents.... but I'm not casting any judgements on what the causes were but I'd suggest the recent weather played a big part.

yeh they both happend in the space of 4 hours. no good at all :P

your point being?

the dumb bitch ran a redlight and took him out ....so what if he a p plater! u dont even have a licence and u have 250rwkw...

Matt

Umm, because he is a p plater he shouldnt be driving the car, because he is a p plater he will probablly be up sh1t creek with insurance and the police. Oh and krzysiu does have his p's, but he will be in the same situtation as your friend if he is ever in an accident.

actually thats not quite true... it all depends... i know plenty of people who have claimed insurance on Ps with R33s and got the work done.

This wasnt his fault so he should be ok.

its wank , cause i myself almost got tail ended by wankers that very same day not only on the eastern when i was cruising on 106km/h... in the 100 zone, but also thru the springvale road... i sat right on 80-82 when it was 80 and there were morons galore tail gating me im like this is getting to the point where its ludachrist... ppl are stupid to no end... and now... YAY i got to battle the ****ing insurance company because low and behold some stupid **** locked up behind me and hit the ass end.... [hence the rear bar is munged out]... thank **** they didn't hit the boot or it would never align up again. it just looks to be cosmetic... the lights are out of alignment, and one quarter panel corner seems to have a little push on it but thats about the extreme of it....

****ING DRIVERS USE UR ROAD SENSE U PRATTS DONT TAILGATE IN WEATHER U CAN BARELY BLOODY SEE 2 FOOT INFRONT OF U....

not a happy camper... and yes i spotted the s14 green car on eastern and let u guys know then another guy said he saw it to not 15 minutes after me....

go figure and thats about 20 mins before i got smacked in the ass end... sorry gusy for this rant but im far from amused cause now i lose my liner for 5 days due to repairs and the damn insurance company wont give me a rental till its fixed due to work purposes....

so now im either losing what pissy little job i have to bring a small amount of moeny in to cover the cost of the car each week in repayments... so whats next.... ;/

anyone know if a dead battery can also do any harm to the ECU etc or scramble it etc? this is twice the battery was killed because of TOW TRUCK WANKERS

*is on tethers end and needs consultation :P hes lost his baby liner :D*

well .. it goes like this

turning right out of t intersection ..on a Green light.. as far as my friend can remember.. coming from left thru the lights .. one VP commodore and a lowrider ute (left the scene straight away)...

umm ..she cleaned him up ..duno what teh story was.. .. the impact to me tells me that the she ran a red light and was going beyond the speedlimit as the impact turnd the GTR about face back into traffic .... damage was bad enough to put it off the road for 2months while its beeing repaired.. its only been backon the road for about 4weeks since having new N1's fitted.

cops turned up ..looked at the crash .....went and found some "5 witnesses" and slapped him with a failure to give way fine of 165bucks ..and was blamed as the prime cause of the crash .. at hte time.. my friend was dazed as the impact of the air bags to the side of the throat ..kinda knocks oneself about..and the taste of the powder was making him ill at the same time. so he didnt really know what to say or do. Car was driven home not long after ..although most of the cooler pipes were crushed lucky to make it as far as it did.

thats about all i know for now .... but as u can understand.. i'm not appreciative of assumptions on things ppl know nothing about.

what? 5 witness' said that?.... I just don't understand that... i mean greeen = go. red = stop, i learnt that in KINDERGARDEN... well it really shits me... cops probaby saw the line and thought: "well what have we here.. tut tut tut",

Angry, best wishes for your friend.

i think he means when he says that the cops

'went and found some "5 witnesses"' he means the cops were full of sh1t. ---> notice how 5 witnesses is in talking marks. Which is not hard to beleive.

that being said, this happend to a friend of mine, but at a plus intersection, old lady ran the red he had green (at 80 k mind you) smashed into her. smashed his head on the steering wheel and the tradies behind went into him as well. The old lady tried to pin it on the p plater, driving a stock 3 l VL, tradies sed no way the lady pulled out. She copped the fine. The funny thing is the cop said, u know the law is f*cked, coz if it were more serious and u might have died etc. the old lady would have got barely anything for it. But if other way around (p plater fault) probably jail time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...