Jump to content
SAU Community

Recommended Posts

I'm in the market for some new rears *heaven knows why?*

Just like some feedback on what tyres you all have on and are you happy with their grippiness (if there is such a word)?

Been quoted ~$420ea for Dunlop Direzza's DZ101's which i'm told is the "best money can buy" and ~$340ea for Toyo TPG Trampio's in 255/40/17 size. Obviously a bit of range there so want to see what every one else is using.

Cheers!

Dave

Link to comment
https://www.sau.com.au/forums/topic/63650-what-tyres-are-you-running/
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

potenza DAGG.... Yummmmmmm 255/40/17

have no idea how much they would cost plus they came from Japan, no Oz companies made by the looks of things..... but yeah a lot happy than my g-grid i used to have plus the old potenzas....

if ya see any floating around try and grab em.... well i like em anyway:-)

I got a set of Toyo Trampios for $1100 from tyrepower in port kennedy

2x 245x40x18

2x 265x35x18

Tyres are pretty good and service there from the boys are great. Im guessing something in 17inch would be a bit cheaper than that. My personal experience is that tyre places rip people off whereever they can. You get a quote for the exact same tyre down the road for $80 more.

Kuhmo Ecsta Supra 235/45R17's on the front

Kuhmo Ecsta 711 255/40R17's on the rear...

the Supra's are nice, lasted a fair while and grip nicely...

the 711's.... well.. they suck.

i washed my rims perfectly spotless last night, drove around a little bit last night (absolutely no wheel spin or anything) and you can see powdered rubber sitting in the spokes of my rim(rear rims only), they wear that quick its not funny...

going to try Nankang NS2's next i think, mate has them on his wrx and they handle nice

I used to run Maxis 265/35R18's on the rear

and Maxis 235/40R18's on the front. For a pretty unknown(?) and cheapish tyre they had wicked grip on both wet and dry road. Cost about $430ish for the 265's not sure on the 235's maybe $380ish. But with me only running about 250rwhp and you running what now 350rwhp might make a difference.

Z rated means they are high speed rated, over 160km/h so thats what you need on a tyre.

don't get GT Radial Champiro's hard as rocks and shit in th wet, but hey if you want burnout material they will go on for a while but i wish i never got them.

Falkens are always mentioned as a great all round tyre.

Sherriff,

I just put a pair of the Ventus 104's on the 32 a month ago.. pretty DAMN GOOD tyre for the price.

They are up there with S03's in the dry and are about 150$ cheaper per tyre so you can't go wrong.

I havent tried the 104's in the wet yet. S03's have been the best tyre ive used in both the wet and dry.

Shaun

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
×
×
  • Create New...