Jump to content
SAU Community

WRX Club - Rnd 2 - Phillip Island - March 12


Recommended Posts

Bad luck Geoff... bad luck. Not nice to hear at all.

My car has had no tune since in Oz and suffers from a smoky cloud in the rear when on boost... should I really be doing the track stuff yet in your or anyone else's opinion? It drives nice and I drive it every day... no problems yet (knock on wood)

  • Replies 290
  • Created
  • Last Reply

Top Posters In This Topic

Id at very least run it onto a dyno tomorrow, hook up a pressure gauge to the fuel line, throw the probe up the tail pipe and make sure that the things A/Fs are safe and the fuel pump is giving good pressure. Should only cost $50-$100 , and will go a long way to putting your mind at ease, well my mind too since your car is my dream R32 GTR:)

OK. Just got home and I seriously doubt that I will find anyone willing to do the work with such short notice + I will only be able to do such a thing after hours... flat out @ work:(

Any ppl you know who could accomodate such a request?

I will be doing basics tomorrow night. Shopping for Plugs, Oil, Filters, Brake fluid etc... and hopefully have it all done in a resonable time to get up for the 7am meet with JAGR33. I'm currently 800km's over 5000 service point.

I'm a novice in every way including the simple things above and if anyone is willing I would appreciate a hand - I'll buy the beer!

Oh Geoff :)

When reading the start of your post i thought you may have only had injector problems, i was already prepared to let you borrow my newly acquired second hand 550cc SARD injectors and Nismo fruel pressure reg. already mounted on a std R33 fuel rail.

Then you had to blow those plans with your blown engine, so sorry to hear, after all that work.

:)

Alan

Robin, get all that fluff, including an oil pan and get to PI as early as possible friday night

There will be plenty of ppl on hand to help, i know i have to do some running around myself. Which remonds me, anyone going to Race Brakes, or have some RBF600 Motul Brake Fluid i can use, i only have about 35-50ml left:(

So if anyone is going to Rae Brakes full stop tomorrow, grab me a bottle please and ill fix you up tomorrow night.

Come on Chris read this thread and tell me how the car goes:)

Ill be coming to this one! Trying to keep involved with the SAU community still as I plan to buy another Skyline within the year, most likely a decent R32 , this time a GTR.

Ill be cruising down with WEST - hope to meet all you guys there!

Regards

Kim

Robin, get all that fluff, including an oil pan and get to PI as early as possible friday night

There will be plenty of ppl on hand to help, i know i have to do some running around myself. Which remonds me,  anyone going to Race Brakes, or have some RBF600 Motul Brake Fluid i can use, i only have about 35-50ml left:(

So if anyone is going to Rae Brakes full stop tomorrow, grab me a bottle please and ill fix you up tomorrow night.

Come on Chris read this thread and tell me how the car goes:)

I will need to ask the boss lady about staying the night:(

Probably get there by about 7:30 - 8:00 if I leave work on time and do my shopping real quick...

I'll be driving down Sat morning aswell...

Robin/Ferni - wanna meet in Cranbourne somewhere at 7am???

Sounds good, how about Bunnings carpark in Cranbourne corner of thompsons and south gippsland hwy? Leave at 7am sharp from there so arrive there 6:50am or something.

Robin: let us know if you're meeting us at 7am or if your going down to PI tonight. I'd advise going down to PI since like Roy said there will be lots of hands/knowledge to help out, if not where do you live?

Geoff: sorry to hear about the engine :P that sucks!

Hey ferni...unfortunately the anthony in your group isn't me......I'm in Roys group again. Oh and if the Mx5 in your group is an orange one he might be keeping you all honest :P

Andrew Hardeman Gold MX-5 8 1:59.350

Thats the turbo MX5 you're talking about i think ... with a 1.59 you're right it will be keeping me honest !

Geoff - that is truely shattering news mate. I as much as anyone was looking forwards to seeing the project in action. You, Roy, Denham and Gareth made for some mighty interesting comparisons. My fingers are crossed for you mate that it's not complete re-build.

Robin - if it's never been dyno'd / serviced since been in Oz chances are its just running a bit rich and is still tuned for the Japanese 100RON fuel. Maybe consider speaking to Denham about splitting the can of racing fuel with him? 10L in your tank (topped up with Ultimate) will certainly help if thats the case.

Thanks for the sentiments guys. Still a bit shattered.......haven't laid a finger on the car since but I'm going to grab a bore scope and pull the plugs to look at the pistons. It cranks smoothe but won't fire and there is that smoke and oil from the can. May have to get a towie to come put it up the driveway and into the garage as I'm not too keen on pulling it down in the street. Plus the lifting rig is in the garage. At least Robbie at Creatd can get individual Arias for me if the damage is not too bad.

Troy, I hear you but the blame is all mine for not going the extra yard and testing the injectors. Operational tunnel vision it's called in my line of work. Too focussed on the one outcome that other elements are invisible. This was meant to be a monumental weekend.

I had a few drinks last night and just tried to forget....now time to go pull the plugs.

Enjoy and bring them all home in one piece guys.

Does anyone have some RBF600 brake fluid i can borrow? Im runing a bit low and the brakes still need a bleed from when the pedal shit itself at Calder:(

Im hoping it was a bit of air as all the front brake lines were out when i was fixing the Winton damage. I hope it wasnt boiling fluid, i doubt it, but i suppose anything is possible:(

Geoff - that is truely shattering news mate. I as much as anyone was looking forwards to seeing the project in action. You, Roy, Denham and Gareth made for some mighty interesting comparisons. My fingers are crossed for you mate that it's not complete re-build.

Robin - if it's never been dyno'd / serviced since been in Oz chances are its just running a bit rich and is still tuned for the Japanese 100RON fuel. Maybe consider speaking to Denham about splitting the can of racing fuel with him? 10L in your tank (topped up with Ultimate) will certainly help if thats the case.

It's been serviced once B4 and I do, whenever possible put Octane Boost in with every fill (and you can really notice the difference... but still blows heaps of smoke on high boost)

Shopping for goodies on lunch break or straight after work. Troy, I will pick up some brake fluid as I also need some (did anyone see my levels @ the GP - just below the min. line? Not sure when or how... probably teh fang back from Apollo Bay?)

Is there a certain shop that sells it or can you grab that stuff anywhere?

Hope to see you tonight... still have not asked the boss, bit cranky this morning

Cheapest place i have found is Race Brakes in North Melbourne:

Race Brakes Melbourne and Head Office

44-68 Racecourse Road, North Melbourne. VIC. Australia

Ph. (03) 9326-6088 Fax: (03) 9326-3822

Get two if you need some, that way we can actually have enough to bleed mine, and enough to flush yours:) Shoudl still only be $30 odd for two bottles.

Does anyone have a bleed kit? 46n2 borrowed mine and havent had a minute to get it back:(

Will they be open @ 6.00pm? Probaly not. I will only be able to get this stuff after work and I'm in Burwood... not close to North Melb. at all. Any other places?

Got the nod from the woman:) see you all later tonight.

JAGR33 and Ferni - will not be able to meet in the morning.

Thanks guys. All I need now is a new power steering belt and hopefully some bolts to get the bigger rotors on. The car now has a very dodgy looking angle ground vented bonnet on it to go with the common rough r32 gtst look. The more go than show r32 owners like to have. Hopefully I can meet some of you at the bunnings cranbourne meetup if it is still on in the morning.

Take it to United Fire Equipment in Moorabbin, they will test your fire extinguisher for free.  

68 Levanswell Rd  

Moorabbin  

(03) 9553 1112

Woop. Just spoke to Cams, and they said tested every 3 years, and hydrostatic every 6?

Forget where i saw the regulations originally, for some reason thought every 6-12 months.

As for getting the thing inspected, moorabin is a little far from here. All the local people seem to be consultants or not interested in small tanks. Cheaper to pay $20 for a new one.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...