Jump to content
SAU Community

Recommended Posts

Is this the section that you are refering to?

Is there a replacement hand controller screen?

As an unofficial replacement hand controller screen you can check out here for a suitable 128x128 backlit LCD. It even comes in different colours to be cool. I am unsure if this model works OK with the apexi hand controller.

http://graphic-lcd-lcds.shopeio.com/invent...b=Graphic%20Lcd

will it definetly work with power fc?

Hi Paul

I am still running the base map and i notice my knock is very high around 100 - 120. The engine light would blink around 5k-6k rpm range. Any suggestion to reduce the knock level to a safe amount, should i reduce the IGN Timing or Add more fuel in INJ? Pls help cos im only getting it tune probably in 2 weeks time when i install a bigger turbo.

Appreciate feedback soon....love my PFC so far on the slight torque im am feeling now.

Hi Paul

I am still running the base map and i notice my knock is very high around 100 - 120. The engine light would blink around 5k-6k rpm range. Any suggestion to reduce the knock level to a safe amount, should i reduce the IGN Timing or Add more fuel in INJ? Pls help cos im only getting it tune probably in 2 weeks time when i install a bigger turbo.

Appreciate feedback soon....love my PFC so far on the slight torque im am feeling now.

stop trashing the car until you get it tuned properly

thats one of the first things covered in the faq

if it keeps knocking and you insist on nailing it use the temporary adjust to back out some timing, dont adjust fuel

use the temp ign adjust (in the faq) and take out about 3 or 4 degress ign timing

hi,

i want to ask if there is any way with the pfc that you tune it without the AFM at all.

thanks,

yes you can, but you need the djetro version

the normal version is ljetro and uses air flow meters

the djetro version uses map sensors

Hi Paul,

I have searched SAU, and I have viewed your intire site, (which helped me alot with my PFC).

Ive been having hicas issues, so I am requird to run Hicas Diagnostic. But for the life of us, we cannot get it working. Is this an Un-supported Feature on the PFC?

I have done the correct proceedures to enable Hicas DIag, But it just will not work.

any info would be appreciated. Thanks heaps.

cheers,

Hi Paul,

I have searched SAU, and I have viewed your intire site, (which helped me alot with my PFC).

Ive been having hicas issues, so I am requird to run Hicas Diagnostic. But for the life of us, we cannot get it working. Is this an Un-supported Feature on the PFC?

I have done the correct proceedures to enable Hicas DIag, But it just will not work.

any info would be appreciated. Thanks heaps.

cheers,

my understanding is the hicas diagnostic is part of the hicas computer in the boot and nothing to do with the main ecu

all the main ecu does is relay the signals (tps, speed) to the hicas computer in the boot an let it do whatever it feels

so yes the hicas diagnostic shoud be suported and it should work fine, if in doubt get a stock ecu and try it with that

besides what are you trying to "diagnose" exactly?

AS you are probably aware, the Hicas light does not come on under operation (like with the A-LSD and 'slip' lights), rather it is on when the car is started, then turns the light off, and the PowerFC and the Hicas work harmoniously together to make sure all is well. (apart from poor sods with the A-lsd)

When the Hicas ECU sends the signal to the main ECU, to display the diagcode light flashes I dont think the powerFC knows what to do with that request. I mean theoretically sure it 'should' work, but its not for me anyway.

I cannot plug the standard ECU back in and start it. And you must start the car to perform the Diag test.

Has anyone else got Hicas Diag (hicas light flashes) to work, when using PowerFC.?

Hi Paul

Thanks for the advice. I actually did the test as per your FAQ for getting better fuel economy for lower load range. Presently i just lowered the 5-6k range timing. The reason why im asking between Ignition or Fuel is to know the benefit of keeping the exhaust temp cooler would be a better option since the Jap did set the based map on their 100 Ron fuel. My country only supply 97 RON. I dun mind add more fuel while keeping the original base map timing on a higher rpm range. Would u reckon thats possible?

Anyway great FAQ...recent long trip gave me superb economy. Cheers!

Paul:

If your car is tuned with the std AFM can you plug a z32 AFM without having it retuned?

:)

when you fit the z32 you select Z32 AFM from the menu

and the car will run and drive but it will need a retune as the load axis is different

the preselect menu lets you run the car with the new afm and the base settings are spot on

but it does need a dyno tune done

Hi Paul,

I have installed HKS 600cc Injector on my R32, from your Power FC FAQ I could caculate the fuel adjustment. But I can't find the Injector Latenacy, would you have a chance to have the latenacy spec. of HKS 600cc injector information.

BTW, your Power FC FAQ is a great document and help me alot on tunning this unit.

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

1989 Skyline GTR R32

HKS GT-SS Turbo

HKS 600cc Injector

HKS Racing Suction

Apexi Power FC + D-jeto

Paul,

I'd like to say Thank You!! for all the info. It has been extremely helpful. I am located in the US and there just arent very many places here to get this info.

I do have a question. I have an R33 GT-R. My Power FC has the AP Engineering sticker on it. When I open the cover it looks like the Power FC Pro with the additional brown plug like in the pictures of the different PFC models. It does not say it is a Pro on the screen though. Why would there be an AP Engineering version of the GT-R PFC? I'm just wondering if I have something strange here. Thanks for your help.

Donny

Hi Paul,

I have installed HKS 600cc Injector on my R32, from your Power FC FAQ I could caculate the fuel adjustment. But I can't find the Injector Latenacy, would you have a chance to have the latenacy spec. of HKS 600cc injector information.

BTW, your Power FC FAQ is a great document and help me alot on tunning this unit.

hi george

i don't know the latency of the hks 600cc injectors but when you do find it and work it out let me know and ill add it to the faq

Paul,

I'd like to say Thank You!! for all the info. It has been extremely helpful. I am located in the US and there just arent very many places here to get this info.

I do have a question. I have an R33 GT-R. My Power FC has the AP Engineering sticker on it. When I open the cover it looks like the Power FC Pro with the additional brown plug like in the pictures of the different PFC models. It does not say it is a Pro on the screen though. Why would there be an AP Engineering version of the GT-R PFC? I'm just wondering if I have something strange here. Thanks for your help.

Donny

hi donny

it sounds like you have an fcpro then, you can check this by going to ETC, VERSION and it will have PRO in the name if its a pro official version

Hey Paulr33 im new to this power FC things i was just wondering is there anythings such as Silver Power FC hand controllers? it has a part number of FCC3 030-00022 and its a silver power FC hand controller? will this fit on my Power fc? with a serial number of PFC ECR33 010-0410 any help will be cool :P

Cheers

Chi

Hi Paul

I am going to do a tune soon. Just wondering when the knock comes on between 5-6k rpm, does it have anything to do with the VVTI for the NEO engine?

Would the VG30 AFM make any difference in hp & tuning if the turbo is still stock?

Hey Paulr33 im new to this power FC things i was just wondering is there anythings such as Silver Power FC hand controllers? it has a part number of FCC3 030-00022 and its a silver power FC hand controller? will this fit on my Power fc? with a serial number of PFC ECR33 010-0410 any help will be cool :)

Cheers

Chi

hi chi,

are you sure its silver?

can you get a photo of it ?

if it is FCC3 then it should work fine on ECR33 style powerFC

Hi Paul

I am going to do a tune soon. Just wondering when the knock comes on between 5-6k rpm, does it have anything to do with the VVTI for the NEO engine?

Would the VG30 AFM make any difference in hp & tuning if the turbo is still stock?

hi driftmiester,

no it wont, its just normal detonation occuring

follow the standard guidelines in the powerfc faq on how to debug knocking

no the z32 afm just allows for more tuning resolution and nothnig else, its the same size as the standard rb25 AFM so it wont add power

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...