Jump to content
SAU Community

Recommended Posts

well you can adjust the idle rpm by going to setting, eng rev

ignoring the map tracer does, is there anything wrong it does it sound like its idling too high or is pegging at a higher RPM for a period then returning to normal

  • 2 weeks later...
pegging at a higher RPM for a period then returning to normal

yeah it's doing that. nothing seems wrong as such, it's as though you stab the throttle a tiny bit after clutching in.. just takes a few more seconds to return to idle.

i guess i'll just deal with it, or let the tuners try to sort it out, it's not such a big deal

Hey how are ya Paul, i've had my PFC in my ECR33 series 2 for about 1yr and a half and i've noticed for a while now my car has wierd IDLE's like sometimes it will stall and it will IDLE hunt really badly, like when im in 2nd gear i put in my clutch the car feels like its going to stall but then it comes back up again. cheers bro

  • 4 weeks later...

hey dude not sure if anyone could help me but i need a power FC for an r32 skyline GTST, its my drift car and i really want some more power so thought that would b the best option. It doesnt matter if hand controller is not included

Please help as i have looked everywhere

  • 3 weeks later...

Hi All

I hv been doing my own tuning (on the road) with wideband & datalogit for the past 1 year. Running a T04E turbo which is quite laggy and will come on full boost at 4.5k rpm. Just wondering to bring up the boost faster whether it would be better to reduce timing on the low load and making it leaner on fueling or should it be another way round.

Anybody willing to share map with this kind of setup?

dial in as much IGN timing as you can handle without detonation

the more timing you can run, the more efficient the engine is, the quicker it will ramp on boost

really concentrate on the ramping area - do a map tracer / knock map and find the cells that dont knock enough and advance the timing there

Hi Paul,

You mentioned that the Power FC will emulate all other auxillary functions of the car such as aircon, ABS etc, does the Power FC also operates the airbag system? I presume that it does. If so, then can the Power FC pick up any malfunction on the airbags?

The airbag light flashing was triggered when I disconnected airbag module to re-align the steering wheel. My situation is that my airbag light keeps on flashing on the dash even after everything was plugged back in place properly. I cannot reset it using the well known method of activating the drivers door jam switch 5 times within 7 seconds of turning key to on position, as I suspect this does not work on the Power FC; and I was told that the Nissan consult cannot communicate with the Power FC for diagnostic purposes.

If the Power FC picked up the airbag fault in the first place, wouldn't by reconnecting the airbag module rectify the fault? Or does the Power FC retain memory of the fault until it is erased?

So, what is the solution to stop airbag light flashing:

1, Re-set Power FC and reload tune. Does the Power FC memorize airbag malfunction?

2, Replace Power FC with stock ECU and run diagnostic with nissan consult to make sure everything is OK

3, cut wiring to airbag light on dash; and risk driving with faulty airbags?

Please help as the light is driving me insane!!!!

Thank you

Cheers

Matt

the PFC doesnt touch or run the airbag, its a seperate stand-alone system

there is a way to run and clear the airbad diag, search on the forum by ylwgtr2 or goolge it

its a way via the opening and closing the door a number of times and then turning the car on

BNR34 airbag diagnostic clear procedure;

try this- have your drivers door open, turn the key on to ignition and within 5 seconds press the door light switch 7 times.

this will reset it.

Ok, I read over the entire FAQ, and unfortunately my question wasn't answered. I'm looking at a used R32/R33 GT-R Power FC and I can't tell if it's L-Jetro or D-Jetro.

The serial number is:

PFC GTR33 000-0062

On some others I see either L or D after the "GTR33" but this has nothing.

Can someone please help me to figure out what it is?

hi jason

the newer model includes L or D in the model # as part of the build #'s

the original first batch dont include L or D in the model string so you can't tell

the only sure way will be to plug it in and view ETC, VERSION

there is no loom difference between djetro and ljetro PFC so you won't be able to physically tell the difference

Hi Paul,

I've just attached a GM map sensor to my L-Jetro R34 GTR PFC and have discovered that there is no place to enter the new map sensor calibrations for the scale and offset.

Is this a limitation of the R34 GTR PFC, or just an option that hasnt appeared yet in the datalogit software?

Any suggestions?

Cheers,

Ian

you cant run djetro on ljetro PowerFC

the ljetro PFC only works with airflow meters and nothing more

an optional map sensor is available to be connected up as part of the boost control kit

the djetro PFC only works with map sensors and nothing more

you need to sell your PFC ljetro kit and AFMs and anything else

then purchase the djetro PFC to suit BNR34 along with the djetro harness and a pair of map sensors (you must have two)

I wasnt trying to make the ecu tunable by MAP sensor, I was just after logging and perhaps boost control on an L-jetro but using an after market map sensor.

I ended up solving the problem with the calibration of the GM map sensor by coming up with a circuit to fudge the sensor output voltage to make it compatible with the FC. I did a post up on it in the forced induction performance section. I just realised it should have probably been posted here in Modifications/FAQ.

http://www.skylinesaustralia.com/forums/Ad...Po-t313168.html

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...