Jump to content
SAU Community

Recommended Posts

heya

maybe i'm just paranoid but do any of you guys experience the back sliding a bit (oversteer?) when going 90 degrees at medium/large sized roundabouts at about 50-60km/h?

just wanted to know whether it is normal or whether the problem popped up recently (didnt really noticed it) until the heavy rain few days ago

thanks

edit: i've read that this is due to HICAS?

Link to comment
https://www.sau.com.au/forums/topic/65786-re-traction-and-oversteer/
Share on other sites

They say the best control system ever is the one between your ears:)  When driving make sure the brain stays connected to the right foot:)

Thats fine, but unfortunately in my car there is a loose nut behind the wheel

LOL...well thats funny, mine comes with a tool behind the wheel.  

What came first the tool or the loose nut:confused:

Well that all depends on if the nut became loose, or was loose to start with doesnt it.

Also remember that if you haven't had much rain lately and then you get a downpour that the road will be greasy and slippery until all the crap is washed away.

Gosh, I hope it rains soon, so some of the crap on this thread gets washed away. :wassup: :wassup: :wassup: :wassup:

To add some more fuel to the fire.

I find it really hard to induce oversteer on a corner at those speeds unless I really give it a hell of a lot of throttle. But it has a lot to do with suspension setup and tyres etc. Maybe your tyres are starting to get worn on the inside? I noticed a lot more oversteer when my old Toyos were getting a bit thin on the inside.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • FWIW, I've aerated oil, and cams snapped. You can figure out the rest 🥲
    • Depending on the hose, sometimes engine out is the easiest option  
    • Get an inspection camera up there. 
    • Yeah, but look at the margin in viscosity between the 40 and the 60 at 125°C. It is not very large. It is the difference between 7 and 11 cP. Compare that to the viscosity at only 90°C. The viscosity axis is logarithmic. The numbers at 90 are ~15 and ~35. That is about half for the 40 wt oil and <half for the 60. You give up viscosity EXPONENTIALLY as temperature rises. Literally. That is why I declare thicker oil to be a bandaid, and a brittle one at that. Keep the oil temperature under about 110°C and you should be better off.   Having said all of that, which remains true as a general principle, if you have indeed lost enough oil from the sump that the pump was seeing slightly aerated oil, then all bets are off. That would of course cause oil pressure to collapse. And 35 psi is a collapse given what you were doing to the engine. Especially if the oil was that hot and viscosity had also collapsed. And I would put money on rod or main bearings being the source of the any noise that registered as knock. Hydraulic lifters should be able to cope with the hotter oil and lower pressure enough to prvent too much high frequency noise, although I am willing to admit it could be the source.
×
×
  • Create New...