Jump to content
SAU Community

Recommended Posts

umm the gtst realistcly would do in the 16s, lets not kid our selfs

i owned a R33 GTS-T with a mad exhaust, runnin 12psi boost and it only ran into the high 15's low 16's...

a 32 is only 2.0l as well, so it would run high 16's

either your 33 was running like shat, or you cant drive.

or maybe your exhaust wasnt MAD enough.

ive seen 33's with FULLY SICK exhausts and 12 MEGA psi running 14's

I have never seen a turbo Skyline run higher than a mid 15, stock or modded.

A stock SR20 Pulsar from the early to mid '90s run 16.2. Hell, even a stock base model BA Falcon 4L auto is supposed to run 16 flat or better

.

the common misconception is a 'stock' car...

has anyone ever seen a DEAD STOCK r32 down at the drags?

...most people often call a car with just a 3" exhaust a 'stock' car

i mean stock exhaust, muffler, cat, air filter, boost, fuel... EVERYTHING

the kind of person who takes their car to the drags is the same kind of person who will modify it

i tend to think that i DEAD STOCK r32 gtst with a normal driver would run a 16...

Waz.

Well heres my 2 cents

I have an R31 Skyline with an RB30E in it and the thing was stock as they come and ran high 16's. I added extractors and exhaust and got low high 15's, low 16's. Now I don’t know where every one is getting there information that R32 Skylines stock would run 16's, but my stock R32 seems to be a hell of a lot faster then my R31 and it has been completely stock till about 2 days ago when I added a pod and all that did was make it sound good no noticeable performance. I think people should check there numbers before posting that R32's run 16's.

Just because you have an engine that’s about to die or a bigger engine then a 2.0L and your car is slow, don’t mean the majority of stock R32's are slower then you :kick:

i mean stock exhaust, muffler, cat, air filter, boost, fuel... EVERYTHING

the kind of person who takes their car to the drags is the same kind of person who will modify it

Gimme $50 and i'll go take mine out there and see how slow mine can run :rofl:.. it's auto which would make it even better. oh but its got a K&N filter so i guess it's too highly modified :)

Go on, we will pass the colleciton hat around:)

My stock R32 ran a 13.4 @ 108mph. Gtr and R33 owners call their internally std engines stock, well so am i:)

If you cant run a 15.5 in any std manual id be scratchign my head. I have been in an R32m which other then a air filter is completely std. Im betting it woudl get into the high 14s pretty easily, where is 46n2 when you need him:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
    • Yeah, I would have said the same. It makes me suggest that there are other things wrong, such that the ECU is totally unhappy with the broken sensor. The only other thought here is that maybe it is shorted, which might cause a different issue to the typical "disconnected" sensor.
×
×
  • Create New...