Jump to content
SAU Community

Recommended Posts

umm the gtst realistcly would do in the 16s, lets not kid our selfs

i owned a R33 GTS-T with a mad exhaust, runnin 12psi boost and it only ran into the high 15's low 16's...

a 32 is only 2.0l as well, so it would run high 16's

either your 33 was running like shat, or you cant drive.

or maybe your exhaust wasnt MAD enough.

ive seen 33's with FULLY SICK exhausts and 12 MEGA psi running 14's

I have never seen a turbo Skyline run higher than a mid 15, stock or modded.

A stock SR20 Pulsar from the early to mid '90s run 16.2. Hell, even a stock base model BA Falcon 4L auto is supposed to run 16 flat or better

.

the common misconception is a 'stock' car...

has anyone ever seen a DEAD STOCK r32 down at the drags?

...most people often call a car with just a 3" exhaust a 'stock' car

i mean stock exhaust, muffler, cat, air filter, boost, fuel... EVERYTHING

the kind of person who takes their car to the drags is the same kind of person who will modify it

i tend to think that i DEAD STOCK r32 gtst with a normal driver would run a 16...

Waz.

Well heres my 2 cents

I have an R31 Skyline with an RB30E in it and the thing was stock as they come and ran high 16's. I added extractors and exhaust and got low high 15's, low 16's. Now I don’t know where every one is getting there information that R32 Skylines stock would run 16's, but my stock R32 seems to be a hell of a lot faster then my R31 and it has been completely stock till about 2 days ago when I added a pod and all that did was make it sound good no noticeable performance. I think people should check there numbers before posting that R32's run 16's.

Just because you have an engine that’s about to die or a bigger engine then a 2.0L and your car is slow, don’t mean the majority of stock R32's are slower then you :kick:

i mean stock exhaust, muffler, cat, air filter, boost, fuel... EVERYTHING

the kind of person who takes their car to the drags is the same kind of person who will modify it

Gimme $50 and i'll go take mine out there and see how slow mine can run :rofl:.. it's auto which would make it even better. oh but its got a K&N filter so i guess it's too highly modified :)

Go on, we will pass the colleciton hat around:)

My stock R32 ran a 13.4 @ 108mph. Gtr and R33 owners call their internally std engines stock, well so am i:)

If you cant run a 15.5 in any std manual id be scratchign my head. I have been in an R32m which other then a air filter is completely std. Im betting it woudl get into the high 14s pretty easily, where is 46n2 when you need him:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...