Jump to content
SAU Community

Recommended Posts

Phoungy, what's up????

It probably would just make it easier to buy a manual, instead of having it converted from automatic, but if you want to go that way read through this thread - http://www.skylinesaustralia.com/forums/sh...ead.php?t=63000

The difference in price between manual & auto would probably be lost with the conversion price anyway, although you would have new components.

just read the thread, but im really serious importing a 4 door skyline, prob is most of them are autos, hence manuals are rare and expensive.

it is an option that im willing to take since auto arent thrashed as bad as some manuals, but if any1 knows any local workshop that does it, plz help out.

I'm in the process of importing a 4 door manual R32. Just be pacient, look through the auctions for a suitable one put a bid on and wait. It may take a while to find one but you'll be happy when you buy one, that you spent the time looking.

Took me 2 months to find a suitable one through trying and bidding on an average of 1 car every week and I'm happy that I did. We'll just have to wait and see what condition it is actually in. :)

Thanks for the plug Bam Da Man but that is for a 180sx or R32.

The box alone for an R33 GTS-T is around $1300-$1500 plus all the parts so the conversion would be closer to the $3-$3.5K depending on clutch.

Cheers

Ken

I did a manual conversion on my r33 and did it all my self... It is a fairly easy job to do and works out cheap if you do it the way i did it.........

I ordered a 33 halfcut (manual) from a place in wangara (pm if you want the details as this place doesnt like to be known about) for about $3500, swaped boxes and sold the halfcut here for $3500!!

The conversion is simple, you and a few mates can change the flywheel and lift the box in. The pedal box is a bit fidgity but if you persist its all ok. You dont have to remove any of the computers as it all adapts well.

The only electrical things you have to sort out are the reverse lights, speedo and neutral start switch (which i just looped together), But i have the way i did it written down if you need it.

Everthing else just bolts in (except for a hole you need to drill for the master cylinder)..... And the beauty of a halfcut is you have all bits to make yours a complete manual.... nuts, bolts, correct dash, centre console, gear boot etc etc.....

Saved me 5000 when purchasing the car, not that i wanted the manual at the time, it just happened that i annihilated the auto haha :)

Mike

SL33KGTS thanks for that advice, seems like a good idea and might save me sum cash in the long run cuz i might need sum extra parts in the future.

as for swapping it mysef, the only clutch &tranny i ever replaced is on a datsun (81) and that just a straight swap of the tranny and clutch that requires a shit load of upper strenght, becuase i didnt have a ramp.

dont get me wrong, i love doing things myself, but i doubt ill know how to get the peddal in there. and plus i doubt i have the rite tools

cheers guyz

Ps G0DF4Th3R whats ken's number

I had my four done bout 3 months ago. Can't conplain just a few simple things to iron out yet. Like when u convert using a auto speedo it reads 60 kms at 110. I just put a manual speedo cluster in and now 120kms is 110 accordin to gps. Also still got to get the reverse lights hooked up.I got a r34 box put in and it has cost me around the 3g mark but i couldn't be happier. Still worked out cheaper for me to do this then buy and manual and i have a 34 box ;) so much nicer. I have a Phone number of a guy that can do the conversion if u are intrested.

The autos in the 33 are extremely strong and i know of a few with stage 2 shift kits and 2.5 to 3 stalls....

From factory they have a failsafe function to prolong life. Everytime the trany shifts, the computer causes a missfire in the fuel/ingnition system so that no power transfers through the box at that time.... it sucks badly.... but i found a way around it: pump the gas pedal just before change (ie off then on) and she used the smoke into 2nd!!

Another advantage is the snow mode. The snow mode stops the use of 1st gear (unless you are manually in 1st) for slippery conditions..... so when you stall it up, put the stick in 2nd and it stalls in 2nd...... more boost no spin. When the light goes green, drop it into 1st and you'll have full boost. It is litterally like dropping the cluch in a manual ;)

Unfortunately as a consequence i destroyed the box after 6 months of hard driving..... unlucky hehe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • All the schemas I can see, indicate your typical setup of ATF 'cooler' (read: heat exchanger) in the bottom radiator tank..ie; https://nissan.epc-data.com/stagea/wgnc34/5413-rb25det/engine/214/ ...but I can prattle on a bit here. These trannies have a thermistor in the sump ~ the TCU reads this and 1. bumps the line pressure up when the ATF is 'cold' and 2. prevents the TC lockup clutch from operating, until the ATF comes up to minimum operating temp (keeps the ATF 'churning' through the TC so it heats up quicker) -- trigger point is around 55C. In these conditions, the engine coolant temperature rises faster than the ATF temperature, and also helps heat the ATF up, which is why it's best to think of the in radiator tank setup as a heat exchanger ; the heat can flow in both directions... ...with these trannies, the 'hot' ATF comes out the front banjo bolt, flows through the cooler/heat exchanger, and returns to the box  via the rear banjo bolt. This gets a mention, due to the wildly different opinions wrt running auto trans fluid coolers ~ do you bypass the in radiator tank altogether, or put the cooler inline with the in radiator tank system...and then, do you put the additional cooler before of after the in radiator tank system?... ....fact is the nominal engine operating temp (roughly 75C), happens to be the ideal temperature for the ATF used in these trannies as well (no surprises there), so for the in radiator tank system to actually 'cool' the ATF, the ATF temp has to be hotter than that...lets say 100C -- you've got 25C of 'excess' heat, (slowly) pumping into the 75C coolant. This part of the equation changes drastically, when you've got 100C ATF flowing through an air cooled radiator ; you can move a lot more excess heat, faster ~ it is possible to cool the ATF 'too much' as it were...(climate matters a lot)... ...in an 'ideal' setup, what you're really trying to control here, is flash heating of the ATF, primarily produced by the TC interface. In a perfect world, wrt auto trans oil cooling, you want a dedicated trans cooler with builtin thermostatic valving - they exist. These should be run inline and before the in radiator tank system ~ when 'cold' the valving bypasses the fin stack, allowing the ATF to flow direct to the in radiator tank heat exchanger, so it works 'as intended' with helping heat the ATF up. When 'hot' (iirc it was 50C threshold), the valving shuts forcing the ATF through the cooler fin stack, and onto the in radiator tank heat exchanger...and you sort of think of it as a 'thermal conditioner' of sorts...ie; if you did cool your ATF down to 65C, the coolant will add a little heat, otherwise it works as intended... ...the 'hot' ATF coming from the front bango bolt, is instantiated from the TC when in use, so all/any flash heated oil, flows to the fluid-to-air cooler first, and because of the greater heat differential, you can get rid of this heat fast. Just how big (BTU/h) this cooler needs to be to effectively dissipate this TC flash heat, is the charm...too many variables to discuss here, but I just wanted to point out the nitty-gritty of automatic trans fluid coolers ~ they're a different beastie to what most ppl think of when considering an 'oil cooler'... /3.5cents   
    • Been a busy but productive day. Axle and hubs acquired. All fitted up after a bit of modifying. Need to sort out wider mudguards and running light reflector covers but other than that the trailer is gooood to go !!
    • Selling a SMIC for a Nissan Stagea C34 Series 2 and the pipe from the intercooler to inlet. (I believe it is the same R34 GTT, please correct me if I'm wrong) Price: $50? I dont have a photo of the big black pipe that goes from SMIC outlet to throttle body.
    • So the original radiator is leaking now. Looking at getting a fully aluminium one next. Am I correct in saying that the Series 2 Auto Stageas have a separate trans cooler from factory (located in between the rad and intercooler in my previous post/message).   Currently looking at Fenix $460, Blitz $700, GReddy $800, and KoyoRad $740. What are everyones thought on Fenix ( ive read a few comments saying theyre cheap Chinese rebrands etc and how their build quality is... well.. chinese...)  compared to the others? Worth the extra couple hundies?
×
×
  • Create New...