Jump to content
SAU Community

just to clear up a few things!!!

Guest two.06l

By Guest two.06l,
in General Automotive Discussion

 Share

Recommended Posts

Guest two.06l

Guest two.06l

Posted
Posted

The engine in TWO.06L was built by myself (Paul...DIRTgarage) after a workshop in Newcastle who i will not name, overboosted it while fitting an APEXi AVC-R. Thus destroying no.6 piston's ring lands. A unamed workshop in another part of Newcastle is apparently taking credit for the build. I dont know how this could be as they do not work on their own engines but send them down to Sydney for the work to be done for them. The only work this workshop done was on the previous engine, fitting a set of cam gears and dialing them in with incorrect spec's (not where i had requested them to be set) resulting in a 50hp loss in the top of the rev. range. If you can't build your own engines **** don't take credit for someone elses work!!!

Link to comment
https://www.sau.com.au/forums/topic/68920-just-to-clear-up-a-few-things/
Share on other sites
DRAGTS Rising Star

DRAGTS

Posted
Posted

Well I can tell you someone eather has there wire's crossed or there full of sh1t! He has never said anything like that to me and we speak all the time on the subject of performance cars in newcastle and aus for that matter. He has nothing to gain from speaking such BULLSH1T. He has His own car to take credit for. But he doesnt even speak about it. Let alone your car. Dont beleive it. And please dont go calling people BOZO'S, When You say He only apparently said it. Cheers

Guest two.06l

Guest two.06l

Posted
Posted
Well I can tell you someone eather has there wire's crossed or there full of sh1t! He has never said anything like that to me and we speak all the time on the subject of performance cars in newcastle and aus for that matter. He has nothing to gain from speaking such BULLSH1T. He has His own car to take credit for. But he doesnt even speak about it. Let alone your car.  Dont beleive it. And please dont go calling people BOZO'S, When You say He only apparently said it.  Cheers

Just thought we'd nip it in the bud to stop all the sh1t talk circulating. We know what was said.........enough said!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...