Jump to content
SAU Community

Recommended Posts

Does ne1 know of a way to may the lights on my R33 clear again it looks filthy when you turn them on!!!

The plastic has faded and is starting to crack =(

I have heard of plastic polish does ne1 know if this works?

Does ne1 know where i can get a replacement set for a decent price as i have been quoted $1000 for a new set!!! =(

Link to comment
https://www.sau.com.au/forums/topic/69345-fixing-cracked-and-faded-lights/
Share on other sites

I use Meguiars ScratchX and it does the job nicely. It's a little bit pricey (about $20 a tube), but bonus is that you can use it on the rest of the car as well to get rid of light scratches, whereas you cannot with other things like plastic polish, toothpaste, Gumption etc.

  • 6 months later...
  • 1 year later...

I do this at work, bit scary at first but it works.... If they're really bad, sandpaper first.... work your way up through the grades of wet and dry to 1500 or 2000.... then silicone free polish. Takes about an hour a pair, even on the worst condition lights.

  • 2 weeks later...

Try using silvo from Coles or woolies. about $8 for a can that will last you two lifetimes.

Using a cotton cloth... put some on it then rub in small circles with pressure.

Then buff off with a clean cotton rag.

Finally, to help protect the finish... add some car polish and then polish off as per usual.

This will cure the fading/yellowing problem but not the cracking.

Plastic gets old and doesn't like the sun... it cant be helped.

Edited by negoshi8or

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...