Jump to content
SAU Community

Recommended Posts

Hi new I'm new to this forum sort of have been signed up for nearly two months and have been trying to find some info but not having much success, I have just about sold my Lancer today and before I make up my mind if it is the right thing to do I took a R33 stock auto out for a drive, result: low speed from 0 - 70 seemed sluggish and not as responsive as the Lancer but from 70- 110+klm the speed really hit in very quickly (much faster than the Lancer)

Now the gentleman that is trying to convince me that I should buy the auto because the motor is less likely to have been used for drift or racing - true can understand that and also he believes that the autobox is a stronger unit than the manual....

Now I do much preferre to be driving a car in a spirited manner so how do we make the auto go faster I am guessing that the exhaust could be upgraded to 3" and an Apexi or maybe even a GReddy could help out with a/f ratios as well as a good sized front mount i/c is this going to be enough to get me better low torque and hopefully mid 13 quarters, or am I going to be needing to look at getting a manual and still have to do all of the above to achieve the times that I am wanting

any help here would be very much appriciated

Link to comment
https://www.sau.com.au/forums/topic/70038-about-to-buy-r33-with-autobox/
Share on other sites

...took a R33 stock auto out for a drive, result: low speed from 0 - 70 seemed sluggish and not as responsive as the Lancer but from 70- 110+klm the speed really hit in very quickly (much faster than the Lancer)

Im assuming its turbo right??

Its sluggish coz its got many restrictions placed on it (namely exhaust & intake) & these need to be replaced if you want better response. I believe in the auto theres a kick down when you plant your foot down & hit 70-80kms. This is where the trans will kick down to a lower gear, thus the sudden increase in torque.

Now the gentleman that is trying to convince me that I should buy the auto because the motor is less likely to have been used for drift or racing  - true  can understand that and also he believes that the autobox is a stronger unit than the manual.

:bs!: Just coz its stock & auto doesnt mean it hasn't been thrashed around, Id still get an independent mechanic to check it out for you. Im told the auto is strong, but dont expect to last long if you plan to go over 200rwkw - I doubt it will last longer than a manual at those figures.

Now I do much preferre to be driving a car in a spirited manner so how do we make the auto go faster I am guessing that the exhaust could be upgraded to 3" and an Apexi or maybe even a GReddy could help out with a/f ratios as well as a good sized front mount i/c is this going to be enough to get me better low torque and hopefully mid 13 quarters, or am I going to be needing to look at getting a manual and still have to do all of the above to achieve the times that I am wanting  

any help here would be very much appriciated

Well depending on your budget Id still go for the manual. Theres like up to 20% power loss in the auto compared to the manual (correct me if im wrong) :bonk: .

But it really depends on your preference.

Obviously to achieve ETs of 13sec require $$$. You would do the exact mods as a manual would, except instead of a clutch/ fly wheel you would get an upgraded valve body & trans cooler. When you actualy do get a Skyline, come back & im sure everyone will be more than happy to talk specifics. :rofl:

Cheers

PK

its 2.5-3k to convert your auto to a manual down the track and thats pretty much the price difference . I would have thought a stock auto would kill a crappy 1.5/1.8l lancer across the entire rev range but its been a long time since I had a car like that . Perhaps the timing on the r33 you drove was not set up correctly , that is pretty common and saps power .

A full 3 inch exhaust , new pod/panel filter and some boost and your lancer worrys will be over . It wont be super quick but it will give you a nice push in the back .

thanks for that bit of info - you have confirmed what I had suspected.... this is the first turboed car I have owned and I am not really all that knowledgeable when it comes to boosted cars so I am not sure as to what to expect.... that is why it is a hard choice for me at the moment because I have spent so much time and money on the Lancer (N/A) so this is a very big step up for me so I need it to be the right car to start off with and will then build it up from there - the guy (car salesman ) is also trying to convince me that he can do a converssion on the box which all sounds good but how good will it be (finished job) or rather how good should I expect it to be ?

anyway thanks again if anyone has any other advice I would love to hear it need all the help I can get

My Lancer is pretty much one of a kind I hate to think how much money has been spent on the car it has 137hp at the wheels and will do a quarter mile in 15.6 with traction issues but the top end lets it down and also the gear ratios are only stock which are fine for the 1st 2nd and maybe 3rd but 4th is just a cruise gear along with 5th

well thankfully a stock auto R33 should be able to reach that ET quite easily, probably before you even start modifying things. 4 cylinders can be deceptive in that they feel faster than they actually are, because they make a lot more noise and revs to get to the same speeds.

I stepped from a fair modified (not fully modified) R33 manual, back into a stock as auto R32 recently.. and there is a huge difference between a stock car and one with even a few mods. And the auto can seem very slow at first.. But I always was going to convert it to manual.

There are a few people getting good 13 second times from an R33 auto without upgrading the turbo, just with good tyre and suspension setup and basics things like u are talking about with the exhaust, intercooler, etc.

you have to ask yourself, what do *you* really want - a manual or auto. Because you should probably go with what you are really after to start with, even if it costs a little more. Are you going to be driving the car in traffic every day? to work? for long drives, in the mountains, a racetrack one day, etc, etc.

An auto conversion can be un-noticeable from a factory manual if done correctly.. it just may not be too cheap, and its always a pain knowing that you have to not have the car on the road for a week or two whilst its done.

I am buying a R33 GTS-T auto as well and I did notice they have a higher 'hey I'm going fast' point than most cars I drove. Manual is not really an option for me, I'm too lazy to be shifting all the time in the mountains here :wassup:

the manual gearbox is stronger. forget the trashed vs non trasher, just get a good workshop to check the car out for you and do tests etc. manual is more fun and more powerful to drive. with a boosted car to get most benefit you need to drive the car throught the boost range. that is rev it and control the revs, and youll get the best on boost response and output. going a bit slow? manual shift down and boost comes on

I bought my 96 R33 SII a couple of years ago and the salesman used the same argument but the car was in great condition compared to some of the manual cars he had in the yard. I wouldnt trust odometer readings and I'd get the car checked thoroughly. just a note, after I bought the car dead stock it did 15 flat down the 1/4 on shitty 205 kumho ecstas so I have no idea what you're talking about it being slower than a lancers. however I did lose to a new gen celica by like few thousandth of a second ahahha

as for mid 13s passes, its definitely doable with stock turbo and 200rwKw so far my autobox is holding up fine, hoping to go a bit more so i installed a valvebody and transcooler which will with a bit of luck, let it live pass 250rwKw

Dont believe everything they say about autos. Mine is good for high 12 second passes (i have done a 13.08, but with hard suspension and a stuffed diff). I havve over 200rwkw and its not a problem for the auto.

PKBLADES estimate of a 20% loss in power compared to a manual is a myth.

PAULR33 I have seen more manuals give up at 200rwkw than autos, and if you factor in the number of clutches they burn, the autos are way ahead.

I would listen to PREDITOR, its more a preference. In love the auto in city traffic, and its not been a problem for me on the strip or hills runs, but on a track I agree it would show its flaws.

There are some great advantages to installing a new valve body (Check out the group buy section) and a torque converter if you are looking at quick 1/4 mile times.

Another advantage of the auto is their price, a replacement auto is a lot cheaper than a clutch, and should last a lot longer.

I bought my 96 R33 SII a couple of years ago and the salesman used the same argument but the car was in great condition compared to some of the manual cars he had in the yard. I wouldnt trust odometer readings and I'd get the car checked thoroughly. just a note, after I bought the car dead stock it did 15 flat down the 1/4 on shitty 205 kumho ecstas so I have no idea what you're talking about it being slower than a lancers. however I did lose to a new gen celica by like few thousandth of a second ahahha

as for mid 13s passes, its definitely doable with stock turbo and 200rwKw so far my autobox is holding up fine, hoping to go a bit more so i installed a valvebody and transcooler which will with a bit of luck, let it live pass 250rwKw

Sorry for the miss understanding about the Lancer being faster than a Skyline, my Lancer is no way as fast as a Skyline, at the end of the 1/4 mile the Skyline would of kicked my butt, but having said that the Lancer has a lot of low end torque and is able to get a reasonable half track lead on a Skyline but after that it is all over I am just a distant blurr in a Skyline rear view mirror lol....

I have just located another Skyline it sounds like what I am after not too concerned about how many klms as the are usually incorrect but I do believe that there is a way to check the correct reading via the gearbox or diff reading??? Just need to find out as to how true this is and also find a place that can do it I think the people that recalibrate speedometers can do it for a very moderate fee

The car is a 1997 series 2 GTS T 5speed manual is almost stock just has a Apexi pod filter (unsure as to how well they flow ) and that is it apart from the usual light bodykit, 17" rims Laserline Car alarm and stereo gear.... is there anything that I should be looking at in particular when inspecting this car...

theres no way to verify kms apart from the overall condition of the car , I work on the law of average , 10000km per year in japan and 20000km per year after it was complied into australia . so assuming its a new import it should have about 80000km , more if it was complied a few years back

take it to a performance workshop and get it inspected .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, you're wrong, and you've always been wrong about this. The Nismo has 2 sets of openings. One is a real 2-way, and the other is a 1-way. There is no 1.5-way possible with the ramps that they offer. A real 1.5-way does exist. That Cusco stuff I posted is a prime example. If the forward drive ramps are, say 55°, and the overrun ramps are, say, 30°, then you will get about half as much LSD effect on overrun than you do on drive. It is real, it realy works. OK, you're slightly right. The Nismo has 55° and 45° ramps on the 2-way, so it does offer less LSD effect on overrun. But, I think that just means that they've (probably) sensibly established that you do not want actually equal LSD effect on overrun. You just want "quite a lot, but not quite as much as the drive LSD effect".
    • Just wanted to unearth this and post my baby with the new front ❤️😝 Took her to my wedding rehearsal today. Next up is getting wide skirts (after wedding)
    • Yea, that is what I was getting at in my ramblings too. The nismo one actually is a 1.5 way and a 1 way. They don't do a *2* way because a true *2* way would have equal ramp angles. Or is that a true 1.5 way? Realistically I think a "1.5 way" does not actually exist. A diff can either lock in two directions or one. It also doesn't help that a LOT of people in Australia speak about 1.5 way diffs are referring to their 1 way diff.
    • Well, the trouble with that ^^ is: The configuration shown is absolutely a 1-way, not a 1.5-way. There is no way that a 1.5-way can be said to offer LSD action only on acceleration. If Nismo cannot get that right, then it is impossible to believe their documentation. That ^ is not a 1.5 way setup. That is a 1-way.   And so now I have allowed all doubts to flourish and have gone back to look at the MotoIQ video. I originally made the mistake of believing him when he said "this is a 1.5-way" at the ~6:10 mark. Because what he did was take the gear assembly out of the 2-way opening and just rotate it one place to the left to drop it into the 1-way opening. When he dropped it in there, the cam was "backwards" compared to the correct orientation shown in all other photos of that config. The flat shold have been facing the 1° ramp side of the opening, not the 55° ramp side. And I thought, "gee that's cute", but I was concerned at the time, when he put the other ring back on, that the gap between the rings looked like it was wider then in the 2-way config. And then I said a lot of things in my long post on Tuesday that could only make sense if the guy from MotoIQ was correct about what he'd done. BUT... I have now done my homework. I grabbed a frame of the video with the 2-way config, and then grabbed another with the "1.5-way" config, snipped out the cam and opening of that frame and just pasted it direct on top of the 2-way config. I scaled it so that the triangular opening was almost exactly the same height in both. AND.... the gap between the plates is wider with the cam installed in the triangualr opening backwards. That is.... it cannot go together that way. There would be massive force on the plates all the time, if you could even reassemble it.  So, My statement on the matter? The Nismo diff is actually only a 2-way and 1-way. There is no 1.5-way option in it, regardless of what they say. Here's a photo of a real 1.5-way ramp opening from Cusco (along with the 1 way option). And the full set of 1 through 2 way options from their racing diff, which is not same-same as what we'd typically be using, but...the cams work the same. A little blurry, but it comes from this Cusco doc, which is quite helpful. AND.... Cusco do in fact do what I suggested would be sensible, which is to have rings that do 1 and 1.5, and 1.5 and 2. Separately.  
×
×
  • Create New...