Jump to content
SAU Community

Recommended Posts

Hey everyone, Ive just imported a stock r32 GTST with 46,000 kms on the clock, its in awsome condition. Just would like some advice as im new to this caper about some first up mods which i should consider? where do i start?

I figured first should be things like sports muffler from turbo back, and a pod filter? but all in all i wouldnt have much of a clue :Oops: So any advice would be very benificial to my cause many thanks

Link to comment
https://www.sau.com.au/forums/topic/70353-new-r32-gtst-what-to-get/
Share on other sites

There's SOOO many threads on this so go for a search.

But IMHO forget you should about a pod, upgarde the panel filter if you really must.

A 3" cat-back at the minimum, 3" front-pipe if you want a bit more, and maybe a larger dump if you intend to take things further later on.

Then a FMIC. Then you can put a little more boost thru it.

That should get you started.

I'd invest in a 100,000km service because your car will not be a gueniune 46,000km car unless its been sitting in a musuem in Japan. Thats less than 4,000km a year!!!

I've had five imports and I reckon every single on of them was wound back.

Believe me a major service will be alot cheaper than letting your timing belt snap

Hey mate, im ensure u its only done 48,000 kms! ive had it toally checked out all seems to in right. But yea i was thinking of getting a totall service done anyways cause eben still a car whicj hasnt been driven much at all still ages and will need some work. Thanks for the concern mate.

I'd invest in a 100,000km service because your car will not be a gueniune 46,000km car unless its been sitting in a musuem in Japan.  Thats less than 4,000km a year!!!

I've had five imports and I reckon every single on of them was wound back.

Believe me a major service will be alot cheaper than letting your timing belt snap

Hey mate thanks for the msg, as soon as its complied, i was going to have the timeing buslts worker over, they are in good nich as they are ! my machanic said should look at doing them in the next 1 or 2 services. but better to be safe then sorry thanks mate

first you should sell me your nice clean interior:P

other than that as people have said exhaust, fmic, maybe bleed valve and boost guage

also get an alarm with at least 3 point immobiliser....

I've heard the fuel pump has a few reliability issues, so it's a cheap upgrade to protect leaning out and the engine going "bang".

I'm in the process of buying a R33 GTST.. I intend to do a whiteline works kit (www.whiteline.com.au) suspension as my first mod. That way, you can learn to drive the car with the stock power, and to control it properly under power, and then do exhaust / bleed valve, followed by FMIC...

Everyone has their own ways of modificatons though, it's really up to you :D

Congrats on the buy mate! A car like that with genuine kilometres that low would be a rare beast indeed! Like a few others have said, make sure you invest on a decent alarm system for your car, that would really have to be a priority.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
×
×
  • Create New...