Jump to content
SAU Community

Recommended Posts

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

I get the stutter when low boosting, but i was really after the high pitch ching sound. Do you need to run more than 7 psi to get it?

Apexi dual chamber BOV is easy to install and sounds awesome, has that high pitch sound when revving hard!! also has 3 different sounds but you can hardly notice the difference between them

i don't know if i'm sold on the brotec. my cousins friend had one on his 180 and it didn't make the whup-whup-da-doo-whup-chufff sound he wanted. maybe he just didn't have the right setting chosed on his ecu? the brotec bov is tuneable, isn't it?

i don't know if i'm sold on the brotec. my cousins friend had one on his 180 and it didn't make the whup-whup-da-doo-whup-chufff sound he wanted. maybe he just didn't have the right setting chosed on his ecu? the brotec bov is tuneable, isn't it?

Bro you gotta retune it, I know this guy with a whikid hookup at Carshop nagano if it helps.

They offer a complimentary can of coke while you wait to

Why would you bother getting an aftermarket BOV that is plumb back if the stock one is plumb back ?

So basically atmo BOV's are good for performance because there is a slight decrease in lag and they prolong turbo life but plumb backs are good because they give a smoother ride ?

Bro you gotta retune it, I know this guy with a whikid hookup at Carshop nagano if it helps.

They offer a complimentary can of coke while you wait to

i would love to go, but eddy told me they want 3 surfie shirts per re-tune?? I don't have that kind of doh atm... ;)

So basically atmo BOV's are good for performance because there is a slight decrease in lag and they prolong turbo life but plumb backs are good because they give a smoother ride ?

almost right.

the only change to your post is that ATMO bovs are good for nothing.

Aftermarket plumback bovs are good for the sticker they come with.

This brotec device sounds interesting.

I'll take 12

almost right.

the only change to your post is that ATMO bovs are good for nothing.

Aftermarket plumback bovs are good for the sticker they come with.

This brotec device sounds interesting.

I'll take 12

As a matter of fact Brotec is running a special, buy 12 get 15 free, but the offer is strictly limited to the next 50,000 callers - be quick

almost right.

the only change to your post is that ATMO bovs are good for nothing.

Aftermarket plumback bovs are good for the sticker they come with.

This brotec device sounds interesting.

I'll take 12

i will sell you mine. I'm sick of the farking thing. I've had to have it re-tuned so many times it's not funny and it still doesn't go whup-whup-da-doo-whup-chufff.

I got a HKS super sequential BOV on my car....only because I don't want my turbo stalling when I lift off the throttle. I dont care what anyone says, I'd rather be safe and run a BOV cause for me a GT30 aint cheap. Anyways, I must make my point about the HKS superquential BOV: what a gay souonding BOV. WTF did the designers think: that a squeek is a nice sound....they gayest sounding BOV on the market. The design concept it great but why did they choose that sound? Im gonna plumb it back very soon. If anyone knows how to make it sound just like a pssssht rather than like a cat getting run over, let me know. The reason why I bought this valve is because of its design (push-pull) which garantees no leak but sure as hell not for the sound.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...