Jump to content
SAU Community

Recommended Posts

If anyone would like their services done on the southside. Bring your car into Midas at Capalaba. Mention that you know me from the Skyline club (hehe) and you WILL be looked after both in service and price. We do a VERY thorough job including FULL inspections of engine bay (all items), FULL inspection of suspension and exhaust and FULL measure of brakes. We will not cut corners because you are a 'friend'. We can do any mechanical repairs but are not really into performing modifications and stuff like that. We can get our hands on most aftermarket suspension brands and will fit anything you want to supply to do with brakes, suspension or exhaust...providing it is legal of course. I should be able to give everyone discount on labour, parts and servicing. Maybe not all three at once but be sure that you will pay less than retail.

Our phone number is 07 3245 5399 and the adress is 129-131 Redland bay road Capalaba. We are at the back of the Caltex servo on Redland bay road.

Link to comment
https://www.sau.com.au/forums/topic/71867-servicing-on-southside/
Share on other sites

If anyone would like their services done on the southside. Bring your car into Midas at Capalaba. Mention that you know me from the Skyline club (hehe) and you WILL be looked after both in service and price. We do a VERY thorough job including FULL inspections of engine bay (all items), FULL inspection of suspension and exhaust and FULL measure of brakes. We will not cut corners because you are a 'friend'. We can do any mechanical repairs but are not really into performing modifications and stuff like that. We can get our hands on most aftermarket suspension brands and will fit anything you want to supply to do with brakes, suspension or exhaust...providing it is legal of course. I should be able to give everyone discount on labour, parts and servicing. Maybe not all three at once but be sure that you will pay less than retail.

Our phone number is 07 3245 5399 and the adress is 129-131 Redland bay road Capalaba. We are at the back of the Caltex servo on Redland bay road.

you rock!

i've been needing a service on my auto trannie...

what would the damage be roughly for a new filter, gasket, and fluid?

oh, and do you do any exhaust stuff? i just need to change the gasket that joins the dump pipe and cat...

cheers,

Warren.

sounds like a great offer. Will keep it mind for anything fiddly thats in the cb assed basket.

could you do things like manual conversions, if parts supplied, etc? or is that a bit major?

Aside from being major, we try not to get into the modification side of things. It kinda brings too many hassles where warranty is provided. We give warranty on all our work and with stuff like that it is hard to do. But don't get me wrong, we are capable. I hope you can understand.

you rock!

i've been needing a service on my auto trannie...

what would the damage be roughly for a new filter, gasket, and fluid?

oh, and do you do any exhaust stuff? i just need to change the gasket that joins the dump pipe and cat...

cheers,

Warren.

I'm not too sure on the price of a trans kit for your car. In most cases it is better for you to buy it genuine with things like that. I don't think it is available aftermarket(eg. Repco) and we only buy it for about $10 less than you. Then if we buy it, we have to add markup...so in the end it is cheaper if you buy the trans service kit and we fit it.

Retail on the flush we do is $249 but I can guarantee you won't pay anywhere near that amount. That includes a full flush and treatment with a 99% guaranteed removal of old fluid. It is pretty much the same way the dealer does it but we use a better treatment. It provides better protection of your seals, bands and solenoids than the genuine treatment. I'll ask the boss for a price tomorrow and let you all know.

Trust me when I say this....you won't believe the result after it is done....it will drive like brand new again.

Indication of price for timing belt change please :( Oh and as mentioned Automatic service.

Timing belt costs around $60-$70 genuine. I would not recommend using aftermarket belts for this...unless it's Greddy or something like that. Then add about $120-$140 for labour (2 hours discounted from $80 per hour to $60 per hour). The job in general would take closer to 2.5 hours assuming there are no other problems. So in general $200 would pi55 it in but I would consider doing cam seals at the same time. I don't want to touch the crank seal if it's not leaking as this takes an extra 3 hours to remove and I would go insane if I had to do another one.

But yeah, $200 would easily do timing belt fitted with cam seals.

I'm not too sure on the price of a trans kit for your car. In most cases it is better for you to buy it genuine with things like that. I don't think it is available aftermarket(eg. Repco) and we only buy it for about $10 less than you. Then if we buy it, we have to add markup...so in the end it is cheaper if you buy the trans service kit and we fit it.

Retail on the flush we do is $249 but I can guarantee you won't pay anywhere near that amount. That includes a full flush and treatment with a 99% guaranteed removal of old fluid. It is pretty much the same way the dealer does it but we use a better treatment. It  provides better protection of your seals, bands and solenoids than the genuine treatment. I'll ask the boss for a price tomorrow and let you all know.

Trust me when I say this....you won't believe the result after it is done....it will drive like brand new again.

thanks mate, keen to find out

you can PM me if you don't want to post prices here...

How sk1llzed are you at replacing exhaust manifold bolts on an RB30? Assuming the manifold is a cxnt to get on and off :>

Why are they a cxnt to get to?

I shouldn't have any problems doing it. We have the oxy there, I'll just cut it off :wassup:

If it is the same as every other RB30 then I won't have any problems mate.

Is the guy who owned the Red VX(i think) Commodore still there. Cos when I had my last car, I got awesome service.

That was Emanuel. He was the Area Manager at the time. He no longer works in this role, however, he is still employed at the Woodridge store. He's a top bloke. Some people take him the wrong way coz he can be confrontational but I never had a problem with him.

We will look after you in the same way or better.

Don't limit my offer to just Skyline drivers either. Family of forum members will get the same service and discount. Friends of forum members might but that may be stretching it a little bit. We will still look after them but not as good on price as forum members and family. After all, if we gave everyone discount, we wouldn't get anywhere.

That was Emanuel. He was the Area Manager at the time. He no longer works in this role, however, he is still employed at the Woodridge store. He's a top bloke. Some people take him the wrong way coz he can be confrontational but I never had a problem with him.

We will look after you in the same way or better.

Don't limit my offer to just Skyline drivers either. Family of forum members will get the same service and discount. Friends of forum members might but that may be stretching it a little bit. We will still look after them but not as good on price as forum members and family. After all, if we gave everyone discount, we wouldn't get anywhere.

what about a cousin?

the reason i have asked so many questions is that we have just moved up from melb and looking for a workshop to call our 'regular mechanic'

he has a jeep and is looking for a fairly major service sometime soon and you seem like a top bloke and have had good feedback

we shall definately pay you a visit sometime, i especially want my auto trannie serviced + gasket done (as mentioned) so i shall PM you when the time comes...

cheers,

Warren.

Yeah, no problems. We look after all our customers. We don't bull5hit anyone and we only tell you what needs fixing. We won't fix anything without your authorisation....even a light bulb. We are very thorough. Sometimes people get the shits because they own a crapper and we write down everything. Some people are totally unaware of how bad a shape their car is in. I would be glad to help your cousin anytime they need it.

what about a cousin?

the reason i have asked so many questions is that we have just moved up from melb and looking for a workshop to call our 'regular mechanic'

he has a jeep and is looking for a fairly major service sometime soon and you seem like a top bloke and have had good feedback

we shall definately pay you a visit sometime, i especially want my auto trannie serviced + gasket done (as mentioned) so i shall PM you when the time comes...

cheers,

Warren.

Free inspections of exhaust, suspension and brakes. Just don't ring up and say...I want a free inspection coz it gives us the shits... just ring and say you would like to have us check out your suspension or whatever. Ask for me if you like. I'll sort it out for you.

Do you guys do suspension bush replacements? I potentiall will need some replaced on the rear end of the leopard.. but I have nfi what parts would fit in this case...... :S

Actually how much do you guys charge to have the suspension bushes checked? :)

The reason I say the exhaust manifold is a cxnt to get off is because its an aftermarket jobbie for a high mount turbo. The runners bend nicely over where the bolts go, so they have to be put on in a certain order so you can twist it to get access. Hard to explain without complicated hand motions :)

I've got an exhaust leak that I think is coming from the exhaust gasket, but I'm scared that if I pull it off I'm gonna find busted bolts... Thats where you come in. If I find busted bolts, I gotta take it somewhere who can do it cheap(ish) :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...