Jump to content
SAU Community

Recommended Posts

Hankook Ventus V12 EVO in 215/45R17 (fronts only)

Cost: $206ea

Dry Handling: Holds on really well through the corners, not much noise at all. Can't really compare to many other tyres as these were pretty much the first set on my 17"s.

Wet Handling: Also very good. Not much understeer through corners and actually grip really well, suprisingly.

I can't really give a proper rating since I haven't had much to compare to in performance tyres, but I would definately get another set of these.

Fitted Hankook Ventus R-S2's to the rear of my car yesterday. 18/40/235 on my 18x9.5 wheels (stretched fit)

wear rate is 200, but so far very good! wet weather was good, stable. and in the dry, they hold 350 odd RWKW's well.

  • 4 weeks later...
lol...Federals in the wet... better be paying attention!

in the dry they grip okay if you want to go in a straight line... forget about corners... make lots of smoke though:)

michelin pilot sports get my vote, even when secondhand they run rings around the Federals (thanks ZigenGT)

i agree the federal 595 SS are not that great. not too bad in the dry (6/10) but quite crap in the wet (4.5/10) mainly coz i think they hav quite a hard compound rubber but they do last quite a long time and are great for drifting and burnouts and they r fairly cheap. the federal 595 RS tires are awsome (265/35/18) 423hp at the wheels and no wheelspin in 2nd gear and only a bit in first and very grippy in the wet too. for $325 a tire im definately not complaining id say dry (8.5/10) wet (8/10)

The 595RS-R grips best when it is at 60 - 80C on the tread face, normally you wouldnt be able to generate that kind of heat on the street (unless you were driving very hard for a long time on a hot day).

However, compared to normal street tyres the 595RS-R will provide much more dry traction even when cold.

I use the RS-R's for street and track use and I dont think I will be able to go back to street tyres now, there is just so much grip available with them fitted to my Skyline... If you want extreme traction for the street you would be very happy with a set of 595RS-R's.

BTW - I have managed to get 30,000kms+ from a set of 595RS before - which goes to show that you can get good mileage from them. :P

i agree 595 RS will chop a 595 SS in grip no matter wat.

Edited by daineisdabomb
Got a choice between Federal 595SS or Toyo T1R in 225/50R16's for my new GTR..

Mainly for daily driven road use for now.. May see a track day later on if I haven't gone for larger rims by then.

Which one should I go for? Or much of a muchness. Price difference isn't too much between them. Both seem to be fairly favoured on here.

T1R for sure!! although they r probably a bit more expensive than the feds. softer compound i recon n awsome grip

Kumho KU31 (Previously owned)

225/40R18

Dry Handling 7/10

Wet Handling 7/10

Value 8.5/10

A good mid-range tyre that suited road use fine and are great for a car without too much power. They got a tad noisy but value for money you can't really go past them.

Ling Long somethings (Put on to get compliance, not my choice!)

Dry Handling 3.5/10

Wet Handling 1.5/10

Value 3/10

I guess you get what you pay for. Extremely hard compund, noisy and very little grip. Also hard to balance. The very next day after I got my car I took it into work and had to get them balanced again. It took a good balance from a very good balancing machine (Hunter Road Force) before I could get them to spin up nicely.

When I get some new wheels/tyres I will either be upgrading to Toyo Proxes R-1R's or Pirelli PZero Rosso's (Depending on what I can get the Pirellis for).

LING LONG, the name says it all lol.

Can anyone give me an impression on

Yokohama Advan Sport V103

Michelin Pilot Sport PS2

Bridgestone Adrenalin Potenza RE001

And price if anyone has brought these

Hey guyz can anyone tell me how these tyres are because i have to go for a track day in 2 weeks and need to decide on tyres.. The only reason is i have a tight budget and cant be spending to much.. ->DUNLOP LM702

If anyone knows of any good tyres that i could just use for the track day and something thats not to expensive please let me know!!

Hankook Ventus Sport (K104)

Dry: 6/10

Wet: 7/10

Value: 9/10

These tyres are just value for what you pay for. I did lose alot of traction though when putting the foot down until third gear. I paid around $200 at the time for 17s.

Hankook R-S2

Dry: 7/10

Wet: 8/10

Value: 8/10

Pretty much like the K104 but alot better traction - tends to chirp more than lose traction. These tyres are more to my liking for someone that only uses the car to get from A to B with a rare splash now and then. I paid $260 for 17s.

Toyo T1-R

Dry: 8/10

Wet: 9/10

Value: 7/10

Damn these were expensive, but I have to say that you really get what you pay for because these are fantastic! Honestly though, I would get cheaper tyres as I'm no racer and I don't drive around town like a hoon so all this great grip does nothing for me. I paid $450 for 19s.

i agree 595 RS will chop a 595 SS in grip no matter wat.

im running 595RS, 235/45 all round. so no huge grip on the rear.

on the track they grip up 1-2 laps before the guys running r comp tyres. so your right up the back of those guys until they grip up.

been to philip island twice and both times it has pisssssled down. the tyres amazed me, there is no way i could turn into turn one at the same speed

with normal street tyres.

done 7'ish days so far on these tyres. the center grooving has heaps on meat left. the outer grooving is wearing, to the point now were you cant really

see the outer grooving. (not running enough camber and the tyre is rolling over on the fronts.). have been rotating and swapping the rubber on the rims.

RS-R = 140 tread wear rating

RS = 180

KU36 = 180

Iam considering RSR's for the front of mine but not sure if they are overkill for what I use my car for. I would get the KU36's but they dont make them in my size.

Tim.

Yea car is used on weekends and for motorkhana's, drags, hill climbs etc. I know RS-Rs would be great for these events but they also need to do about 5000 ks per year on the road.

I will have a look into the rt615's. i was quoted 310$ per tyre for 255/35/18's for the RS-R's which is the size i need. I dont think that is a bad price?

Tim.

R32 GTS-T

Falken Ziex

235/45/R17

Did not like these one bit, cheap at $170 per wheel

Front end was bouncing all over the road, not much grip on the rears at all in the wet or dry.

I had some fun times running these on the rear while they turned to slicks lol i strongly do not advise !!!

Wet 4/10

Dry 5/10

Toyo T1R's

Ohh baby ive had these on the rears for around 1yr and they still have meat left on em, and still grip quite well :(:P

Wet 8/10

Dry 9/10

Next tire is going to be the Toyo R1R's on rear at 245/45/R17 in the coming weeks.

While i rotate those bad boy T1R's to the front :P @ 235/45/R17

  • 2 weeks later...

anyone on the big car forums have good Toyo deals? these T1r's sound good.

How would people rate/compare the

Federal 595 RS-R to the KU36? - In the boat of mostly street, with 2-3 track days a year (grip, not drift or drag)

Edited by SS8_Gohan
  • 2 weeks later...

Hi, do you know how to improve braking & handling?

When I stop from 100kms to 30kms in short distance, the tail shake left & right and unstable.

Any ways to improve body stable?

Also, what is the best tyres for track racing for 19"?

ANG32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
×
×
  • Create New...