Jump to content
SAU Community

Recommended Posts

^ good to see that review takahashi.

currently i have toyo proxes 4 and im changing them to KU31.

the proxes 4 get noisey as they wear out (approx 15-20000km now) and the grip in the wet is not so great.

dry however it is an awesome tyre,

I have around 180-190 each to spend on 2 steer tyres... what should i go for.

ku36's i can get for around the 180 mark where the fed RSR's are going closer to 200$ are the rsr's worth the extra money or is there something else i should be looking for?

their needed for steering a drift car. Thanks.

PS the rim is a 17x9.5 would like a 225 but most likely go a 235/45 as i dont think many tyres are made in the 225.

cheers.

Edited by phat_man

Hey all im fairly new to all this, and i've been looking at wheels to buy.

Now I've noticed that everyone in this post that rates Federal's reckon they're really shit?!

My mate has them on his 32 and they seem to grip fine in DRY and WET

and the ride quality is great. I've driven the car and havn't had any problem with them.

Anyone got a positive opinion on them??

Cheers

Not sure about Federals,

but i use four Yok advans on my gtr 245/40 all round and it grips like theres no tomorrow! road noise is shocking, and price is crunching. but launching and cornering, nothing can keep up.

Kumho KU36

Track

Dry 7/10

Took the car to winton yesterday, the tyres did really well considering they are a street semi. They do tend to go of after a few laps though, I got 2-3 quick laps in before having to cool them down.

Street

Dry

9/10

Wet

7/10

Awesome tyre for the street, you will never really feel the limits of these on the street. They are a liitle crap when there still cold in the wet but not really that bad considering how grippy they are. I drove up to Winton on them, did track work and drove back on them and they held up fine.

  • 3 weeks later...

tossing up between ku36 vs rt615

car will mostly be used for street, want great dry grip, decent wet grip, not noisy and reasonable thread wear (15k)

which one is more appropriate?

btw: feel free to recommend another tyre provided its under 1k for a set

Edited by BWRGTR

Bridgestone potenza re040

Dry: 7/10

Wet: 5/10

Conclusion: came with car. They have a lot of rubber, on stock 17's. They aren't bad in the dry, but in the wet they are fun, by that I mean, not a lot of grip. Low road noise, and they don't squeal

I will be going back to Yokohama s-drives when I get new wheels. Great tyres!

tossing up between ku36 vs rt615

car will mostly be used for street, want great dry grip, decent wet grip, not noisy and reasonable thread wear (15k)

which one is more appropriate?

btw: feel free to recommend another tyre provided its under 1k for a set

went with rt615, set for $808, 255x40 for 18x10 rims

Here's my review of the 2 types of tyres iv used in the last year on my R33 GTST (300rwhp)

I have

Kumho KU31 ecsta F:235/35/18 R:265/35/18

Dry

8/10

Wet

7/10

damn good tyre. Low road noise, no squeeling when spinning and the grip was really progressive and gave lots of feedback, esp when traction was broken and did really well to regain traction.

Toyo Proxes4- rears only 275/35/18 (fronts were still the KU31's)

Dry

7/10

Wet

6/10

Not sure how to rate these. Definately a decent enough tyre, especially for road use. However, a very noisy tyre both in general road noise and the squeel they give when they break traction. Im not sure but i do feel these are giving less traction than the 265 KU31's. However i did put these on as the weather was cooling down n we all know a warmer tyre grips better... Also the KU31's were fresh off the production line n the Proxes sat in my shed for 18 months before being put on. Not sure if that kind of age would make a difference but trying to make sense of it all as i was expecting better grip that the KU31's due to reviews and that the tyre was a bit wider.

Furthermore, when these Proxes break traction it is alot harder to reign in n regain traction than the KU31's and far less comunicative as to whats going on and what itl do next when in a big slide...

Nonetheless, for a street tyre, pretty good.

check my 0-100 test on them.

cant complain too much right?

Edited by jjman

Has anyone tried the NITTO NT05 & NITTO INVO yet? How would compare to say the Kumho KU31.

The KU31's where great at the start and just hooked up off the line but once it's started to wear down traction seems to be arse. p.s. I only have 200rwkw's.

Kumho KU36

Track

Dry 7/10

Took the car to winton yesterday, the tyres did really well considering they are a street semi. They do tend to go of after a few laps though, I got 2-3 quick laps in before having to cool them down.

Street

Dry

9/10

Wet

7/10

Awesome tyre for the street, you will never really feel the limits of these on the street. They are a liitle crap when there still cold in the wet but not really that bad considering how grippy they are. I drove up to Winton on them, did track work and drove back on them and they held up fine.

How did the KU36s get 7/10 in the wet?? my experience was they were very ordinary. I would loose traction just lightly accelerating and that was even once the tyres were warmed up.

I have changed to the falken rt615 tyres and I find them fantastic. They are as grippy as the KU36 in the dry but a lot better in the wet, even now that the tread is quite low.

How did the KU36s get 7/10 in the wet?? my experience was they were very ordinary. I would loose traction just lightly accelerating and that was even once the tyres were warmed up.

I have changed to the falken rt615 tyres and I find them fantastic. They are as grippy as the KU36 in the dry but a lot better in the wet, even now that the tread is quite low.

what size are u running? would you say they are a wider or narrower tyre than other tyres in the same size

i didnt choose ku36 to others reviews regarding wet handling and increased noise once it starts wearing down

Has anyone tried the NITTO NT05 & NITTO INVO yet? How would compare to say the Kumho KU31.

The KU31's where great at the start and just hooked up off the line but once it's started to wear down traction seems to be arse. p.s. I only have 200rwkw's.

Not to worry guys did a search and the NT05's appear better than the KU36's :cheers:

  • 2 weeks later...

Just swapped over from running 3x sets of Falken 615 for the last 6 months. Got the Nitto invo. Have to say, they are surprisingly good. The 615's are very grippy as one would expect of a wear rating of 200 and being a semi. Trouble with the 615's is the time it takes to warm up on the street, not warm they are useless, especially in the wet and in a straight line, anytime. The Nitto's are grippy from cold, and yes, I expect them to go off very quickly on track. So far on the street they are sharp to turn in, very quiet, fantastic in the rain. Will be pushing them soon at wakefield so will see.

By the way, the 615's are brilliant on a fast road, Targa type drive. But my, my, my, the wear rate. I have never owned a tyre that wears that fast. Try 8- 10,000k's. I changed tyres every second oil change.

Hi Everybody,

found some KU 31s I'm after on Ebay from Teme Tyres at a great price. When I called Bob Jane to get a price and mentioned Tempe were cheaper by around 100 per tyre, they told me to be careful. At the price Tempe were asking, they were more than likely knock offs, not Australian issed, or could even be old stock by up to 4 years old. Anybody bought tyres from Tempe and can vouch for their quality?

Cheers,

Jamil.

Edited by Jamtime

i bought my wheel n tyre package from Tempe 18months ago with KU31's on the rims. Tyres were good and less than 6months old (checked the manufacture date oval on the tyre).

why dont you call temp n ask them what the age is on them?

As long as tyres are stored in a good environment there is no reason that 12-24months age should be a prob for them from what iv heard.

Edited by jjman

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even with no BOV you will have issues unless the MAF is a hot film type like the R35 which has some design features to deal with reversion. Hot wire MAFs are very sensitive.
    • So i just change the (whatever is inside ma original MAF and slide the R34 MAF (it is gonna fit right in? ) and somewhere on the hot side a BoV...i presume that would be vented to the atmo? I just "trying" to understand...maybe my mechanic would know this   I would not mind(even prefer) to run stock BoV cuz it is way more than fine but i do not have that and only pipeing what is left is oem J pipe ... I will be running Blitz fmic(to fit oem one side style) and i gonna need custom pipes cuz i do not have rest of those pipes and hoses... But i am want standalone ECU. Only choice i have atm is Nistune...but that is not gonna cut it right?I dont know what Nistune can and cant do... I know you guys know Link and Haltech...but whatabout ECUmaster? I know guys in here run those but i literally do not know about that and do not know differences... Just know to take whatever "my" tuner can work on.  
    • Is that the blue one rpm?  
    • Update 2: Today I'm f**king pissed. Some of you probably saw my thread that I opened shortly after joining this forum, "urgently need expert/experienced opinion", in which I discussed the possibility of a porous RB26 engine block which I also found hard to believe. Currently both turbos are out since the shitty braided line that was installed by whoever fitted the GT28 turbos leaked oil onto the exhaust. Today while working on the cam covers to put new gaskets and half moons in, I cleaned the side of the engine block with brake cleaner. Some time later I saw that it was still glistening with oil or coolant so I dried that off. But it was wet again shortly after. Verdict: I'm royally screwed. What you can see here (hopefully, despite shit resolution), circled in red, is a crack above the turbo oil feed. Extent is a few cm long and basically goes from #3 cylinder wall to #4 cylinder wall. It slowly lets coolant through, even without any pressure behind it. I am absolutely dumbfounded as to how this crack even formed, especially since it isn't along the cylinder as it usually is but rather a horizontal crack. Probably a few cm in length. Not sure on how to deal with this issue right now. Most likely, the only true fix is a new engine block, and even a relatively well done temporary fix requires at least a full engine teardown. Neither of those really fit my timetable right now, the car has been in my buddy's garage long enough as it is. I'm open to suggestions, but I'll be looking into ordering a new 05U block soon so I have one ready for the coming year, or whenever the current block inevitably fails fully. (Most likely once the crack reaches one of the frost plugs) I think it'd be a waste of money and time to rebuild the engine with this block. Oh and I found a rust hole on the side pocket of the trunk, which someone covered up with sealant goop, a piece of number plate and bodywork filler. Fun times. So far for every issue we fix we just find a new one that is arguably worse.
    • I have not found this no. I put one back on a couple days ago with no drama. I agree they are tight, but no need to remove anything. 
×
×
  • Create New...