Jump to content
SAU Community

Recommended Posts

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

what gts-t vspec said :D

what do you do if you buy splitfire coilpacks cos stock coilpacks fry with a wolf, and then the wolf fries the splitfire coilpacks?

pls explain?

i have a wolf in mine, so far the only issue is the lack of tuners.

if its going to be cooking my coilpacks then that might explain my engine troubles atm...

I've had stock coil packs and split-fires running with my Wolf with no issues, as have most, seems that the tuner forgot to set the dwell time properly which has caused the issue. I do feel sorry for you, but it's not the products fault, its the person who set it up.

i wouldnt recommend getting a wolf in the first place they are completely not worth it.
Spoken like a true fool. Present facts b4 spinning 5hit. I have used this ecu in my car for the last 2.5yrs without any issues, apart from tune tweeks.

Yeah if you ask Lumpy (hyperdrive) nicely he may do it for u, just dont say who told u that he does a good job on them :)

I also agree the dwell time on the spark will make the coils crack along with a few other combinations but the wolf3d standard r33 ignition program is pretty well on the money, mes betting u may have a faulty loom.

i wouldnt recommend getting a wolf in the first place they are completely not worth it.

Congratulations!! Your nomination for "Nob-end of the Month" has been accepted!

:kick:

I still use the Wolf with Great Results, on stock coils & splitfires! It now controls my 26 auto , using a 25 harness & stock 26 CAS....

Ewen , as for where to get it tuned , go to whoever your Happy with...just remember that no-one can tune out mechanical flaws like udersized exhaust housings , dodgy injectors etc...

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
    • Yes then it will turn on but I want the car features to work  
    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
×
×
  • Create New...