Jump to content
SAU Community

Recommended Posts

how did you go with the clutch booster, i noticed you did it different to how i told you i did mine??? Looks good bud cant wait to see the mph this pulls, also I am interested to talk to you about suspension set ups for serious r32 drag cars!!

Not trying to sound rude. But whats the difference between this and say using an RB30 block? As Im also guessing this would cost a tad more. Not knocking what you have done as its obviously a serious peice of machinery. Just interested in what the differences are.

Not trying to sound rude.  But whats the difference between this and say using an RB30 block?  As Im also guessing this would cost a tad more.  Not knocking what you have done as its obviously a serious peice of machinery.  Just interested in what the differences are.

The big advantage is you use an RB26 block, so it's already 4wd enabled. It also has block mounted oil squirters, you have to do a lot of work to mount them in an RB30 block. You get to keep your original RB26 engine number. The OS Giken crank is forged and fully counterweighted, the standard RB30 crank is not. So you are looking at 10,000+ rpm, if you have the necessary support parts.

:rofl:

The big advantage is you use an RB26 block, so it's already 4wd enabled.  It also has block mounted oil squirters, you have to do a lot of work to mount them in an RB30 block.  You get to keep your original RB26 engine number.  The OS Giken crank is forged and fully counterweighted, the standard RB30 crank is not.  So you are looking at 10,000+ rpm, if you have the necessary support parts.

:rofl:

Ahhh I see! That makes good sence to me! :D 10000rpm out of a 3L :(

I've seen Cubes and I think a few other of the pro rb30 guys point out figures like to get the same power out of an rb25 you need say 9500rpm compaired to about 7000rpm in the rb30. So what happens when you get an RB30 of sorts to rev to 10ishk???

Motec M8 ECU. I'm sure Dicky is still writing up the novel to reply to the mods this has...

If it doesn't make the power he wants, there is always the Nos foggers there to help her on the way.. :(

Meanest GTR I have ever heard. And I havn't heard it on boost yet.

Street car too. lol

More pics here for those interested. http://skeleton.net.nz/~ben/Other%20Parts/Engine/

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...