Jump to content
SAU Community

Recommended Posts

i had one fitted to my r33. brand new. here is what the costs were

$350 core

$400 ish for pipes and bends and the coupler orange/blue silicon joiner things

$510 labour to fit and weld up pipes and cut front bar. cut hole below wiper tank, bolt on cooler, wled up pipes (stainless steel) and connect all the pipes.

$1260 drive in, drive away fitted. the core is 500x300x75 or thereabouts

fitted at chasers in melbourne

There are a few options for the 33

Trust V-SPL Intercooler Kit for Nissan Skyline GTT Price: $1299

Complete kit - Inlcudes all piping & fittings

XTR Front Mount Intercooler Kit for Nissan Skyline GTS-T Price: $1395

Complete kit - Inlcudes all piping & fittings

Blitz LM Intercooler Kit for Skyline R33 GTS-T & R34 GTT Price: $1695

Suit RB25DET

There are a few options but for the dollars u cant go past the Trust FMIC

Troy

what do u think would be a resenaouble price to pay for an intercoolr mounted and all in a r 33?

you would be crazy to pay more than about $800

just because it has a brand name or comes in a kit doesn't necessarily make it any better than if you buy a hybrid and get soem pipes made

myself? i bought the cooler for $400, pipes and fitting was $260... totl = $660

yes, there are some bad cheap intercoolers going around (eg ex-truck coolers) but there are also some decent ones (eg hybrid)

some people have more "dollars than sense" and will pay an extra $500-1000 just for a brand

Warren.

you would be crazy to pay more than about $800  

just because it has a brand name or comes in a kit doesn't necessarily make it any better than if you buy a hybrid and get soem pipes made

myself? i bought the cooler for $400, pipes and fitting was $260... totl = $660

yes, there are some bad cheap intercoolers going around (eg ex-truck coolers) but there are also some decent ones (eg hybrid)

some people have more "dollars than sense" and will pay an extra $500-1000 just for a brand

Warren.

where did you get pipes and fittings for $260 man thats cheap

Its not just the brand

Its the quality of the fittings the pipes and the finish

Sure u could hack one together urself but im sure it will be no where close to the quality of a proper kit such as one from trust...in terms of finish, fittings, mounts, clamps, hoses etc

If u had to piece one together urself that can match the quality, it will either cost just as much money, or alot more effort on your part.

The Blitz kit that I was extremely high quality, so good in fact that I was able to fit it myself and there was no cutting, drilling, cable tieing or duct taping required. It basically fell into place. It also only took me about 5 hours to fit once I worked out the instructions.

I heard the Hybrid and there copies were not that good a quality and some of them tend to whistle when driving.....any truth to that or is it just talk? Also the pressure drop on a Hybrid was alot greater than the jap brands? I guess you get what you pay for huh!

A few peeps i know have Hybrids and Hybrid copies and a couple of them whistle. It depends on how much core area is exposed to direct air intake and for a FMIC to work properlly the more are the better. You can't really hear it over the engine/exhaust noise and then with the stereo on its not even there. But you can hear it if it whistles during everyday normal driving.

I was having a look on www.driftbits.com.au and they have spme pretty good kit prices on there at the momnet. I think it was $680 for the R32, R33 kit for memory

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...