Jump to content
SAU Community

Recommended Posts

I have one installed in the center console - the detectors are mounted on the front & rear bar (for alerting to cops coming up behind me) - it picks up lasers and radors. You wouldnt know it was there if you didnt know where to look. It has always gone off with plenty of warning and is set to not go off at doors etc.

I bought a radar detector for about 650, a beltronics. I turned off k and x band as if you have them turned on your radar detector will be useless. This is the best setup for a radar detector and I can tell you now it works 100% of the time.

I have never had a speeding fine in 2 years.

About the legality, the guy at the store told me they are legal. I stopped at a booze bus once and a cop said i should take it down as it’s illegal to use them in WA. I don’t know if I believe him and still use it daily.

About that theft thing, why would you leave it up? Put it in your glove box. That’s like leaving a mobile on the dash... silly :cheers:

hmm they are legal yes

but just careful WHERE you put it, my mate got caught for obstructing view thingy, $100 for having his speedo near his rearview mirror. i guess they were a bit narky about it... pms'd cops they mustve been.

theft? simple... just dont enter a parking lot with one on, let alone take it off after u park... same with northbridge... no need for one on a sat'day night on james st either.

ive have noticed that there are so many cameras on the street now guys, before i use to see them once a month and now i seriously lost count of how many i spot out.

so im planning to invest in a radar detector, im looking into the Whistler DE-1793 SE

its $695 and rank upto the best of bells. only very few radar detectors pick up the new POP band, but im seriously considering to get one of these in the near future.

does any1 know any cheaper yet just as good radar detectors around?

and is any1 here interesting in gettig one of these themselves too, cuz we can get a group purchase together and make it cheaper for all of us. any seggestion?

cheers

Phuong

im decidin whether to purchase the bel rx65 or rocky mountain. I know the rocky mountain is developed usin military technology. Rocky mountain is also very competivitly priced, and according to their website, they are faster then the beltronics. Only thing stoppin me is the fact that beltronics has such a good reputation. Ive seen one bloke sellling the rx65 for 500. If we manage to get a couple of blokes together we could possibly get it between 450-480 dollars a piece. Anyone interested??? I'll find out today wether he'll budge on the price.

Cheers.

Paul

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...