Jump to content
SAU Community

Recommended Posts

Carbon Fiber bonnet for a 33 GTR, will fit gtst - 300

Stock GTST 33 Bonnet (silver) - 250

OBX Carrera Bucket seats, grey/black (Pair) - 350

17'' Advantec Chromies, 2 Good Tyres, Suit NA skyline or Silvia, 180, Pulsar etc.. 4 stud Multi fits. - 800

Full set of stock r33 NA Rims, 2 good tyres - 250

R32 GTR Tuneable ECU - 250

RB25 Engine and gearbox, no loom, damaged sump, as is - 200 firm.

PM or call me (John) on 0417 608 538, please do not reply here.

John has minimal access to internet so if you don't call him you're gonna wait a long time for a reply.

Bonnet is in his sig but has raised hinges to accomodate the engine so it's not warped like it looks.

What Kevin says fellas...

Give him a call, I'm sure Johnny can help you alot easier that way.

  • 1 month later...

Is that right you only want $200 for motor and box .. MMMMM i have it Call me 0418520650.. Regards Bill

Carbon Fiber bonnet for a 33 GTR, will fit gtst - 300

Stock GTST 33 Bonnet (silver) - 250

OBX Carrera Bucket seats, grey/black (Pair) - 350

17'' Advantec Chromies, 2 Good Tyres, Suit NA skyline or Silvia, 180, Pulsar etc.. 4 stud Multi fits. - 800

Full set of stock r33 NA Rims, 2 good tyres - 250

R32 GTR Tuneable ECU - 250

RB25 Engine and gearbox, no loom, damaged sump, as is - 200 firm.

PM or call me (John) on 0417 608 538, please do not reply here.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
×
×
  • Create New...