Jump to content
SAU Community

Recommended Posts

I have done the search thing and it seems to me that the HKS2835pros is the turbo upgrade for me. I am looking to make around 250RWKW and I have all the usual bolt on mods to do it except a turbo, Z32 & fuel pressure regulator.

I dont want too much lag, but a bit is acceptable. I like the HKS2835pros because I can go for more power in the future if I wont. The only problem is the price $$$$ they are about $4000 for the kit.

My question is, do Garrett make a turbo with similar specs that will bolt directly to a rb25det like the HKS2835pros does. Maybe the popular "disco potato (GT2835rs)", but I think its the wrong flange type...

Any other Garrett suggestions????

Link to comment
https://www.sau.com.au/forums/topic/77263-hks-gt2835-pro-s-seems-the-go-but/
Share on other sites

I thought the "Disco Potato" is more like a parallel of the GT2530 in terms of general performance/air flow? If I wanted GT2835-type performance from a Garrett turbo, I'd probably go a GT3071R. You can get one of those in T3 flange, but need to sort out the wastegate control additionally.

I was thinking about the GT-RS, but you cant push it over much over 250 at the wheels on an rb25det & I would like something that can handle more just in case I get sick of 250 :D.

I currently have 210 and that got old real fast ...

But i guess if it is a lot cheaper then maybe I will have to considder it... and deal with 250 for the long haul.

Yes its a great turbo if u can get it jsut put one in on my vehicle very impressed. Nice kit too.

http://www.nengun.com/catalogue/product/252

Are you talking about the HKS GT2835 pro s? If so how much did it cost & what power are you getting out of it.

Grepin managed to squeeze a shade over 300rwkw (from memory) out of his HKS 2835ProS.

The trick was apparently a set of nice big cams, prior to that 280rwkw was around its limit, boost drops off. With the cams boost still drops off but obviously as a result of cams the same boost level is flowing more air. More air = more power. ;)

From memory the 2835ProS was around 2.6-3k if you import it from japland.

On the RB25 I don't think anything would match it for response and outright power.

with gt garretts under 2k youd be crazy to pay 4k for a hks unit

Depends on the power level. Why over turbo the car?

Very much like over clutching or over gearing.

A lot like the 3ltr with the stock R32 gearing. It sucks, way to short.

I'm getting my self a S13 3.9:1 before any more money is spent on big turbo's etc. What I would give to have a longer first and second gear so I can actually use the torque of the motor.

For up to and slightly over 300rwkw you can save a few $$ by grabbing a HKS 2835ProS or 3037ProS unit from japan for just under 3k imported. It bolts directly on to the manifold.

Buy a garrett item and your paying 2000 for the turbo + exh. manifold 1000 + ext. wastegate 700. 1000 for an exh. manifold.. Cheapest 'decent good quality' exh. manifolds I know of are around 1500.

$1000 or slightly less is for a cast HKS item which by all means is a very good manifold.

I wouldn't pay 4k for a hks item. Buy from nengun or greenline for under 3k.

GT28RS has the T28 flange . A good option could be the Garrett GT3071R with the .68 or .87 ARR HKS T3 flanged GT30 exhaust housing sold separately . Brett at GCG says he can get them as I'm sure others can . Going this way gets you very little exhaust restriction and an efficient turbocharger . Avoid the GT3071R "wastegated " its really a GT2835R with a T28 flange .

Of interest here's some pics of a 2835 pro s from sly33.

After a lot of thinking I've decided to go this turbo - just getting quotes from nengun and greenline.

sly33's getting 266rwkw@ 19psi, no cams just bolt it on.

Hell on a cold night that must be 270..

I think he said he could get more but they didn't want to push it.

266 rwkw must be pretty exciting in rear wheel drive....!

Only problem I can see with the 2835 is the exhaust housing is different - you'd have to get the kit with dump or make one yourself.

I don't think I'd like to go much bigger on the standard manifold - the engine pic here shows that there's not much room left with the 2835.

Good luck!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...