Jump to content
SAU Community

Recommended Posts

I searched and can't find much. Link me if it's been done before please.

I have decided to up the boost in the near future, but on a budget, so I was going to get a boost gauge, and I just bought a boost controller for $35 in this thread http://www.skylinesaustralia.com/forums/sh...155#post1427155

I want a boost gauge so I can watch it doesnt spike. I was going to go electronic but I thought I'd get a gauge for $150 so this puts this all under $200. Much better than $600 for a EBC.

However it seems I may have been mislead. There is much debate about the different gauges.

What is your opinion and why (provide links if you have read reviews) on the following gauges.

Autometer (Was under impression they had a good rep, but seems I was wrong)

Splitfire (Hear they are crap)

Sepco (A few have said they are good, most said crap)

Greddy/Trust (As expected, all good reports)

HKS (havn't found anything)

VDO (found 1 post saying they are good)

Apexi (some say they are good, some say not.

Any others?

I am trying to work out what to buy, but if I am paying $300 for a gauge, I'll pay $600 for an EBC with the gauge and bonus features.

Cheers

Chris

Link to comment
https://www.sau.com.au/forums/topic/78160-what-gauge-to-buy/
Share on other sites

Seriously, i think boost gauges going for $300 are the biggest waste of money and wank possible, unless you have a race car.. and probably then you're at the level where somebody else is monitoring the engine status using proper equipment, rather than a simple incabin gauge.

If you are getting your car tuned by an expert, they're going to be monitoring all of your knock, boost and the rest to ensure that is not dangerous using their tools. Its nice to see where your boost is at whilst driving, and what is happening re: spiking and dips, and of course the "open boost" situation is vital to keep an eye on. But a boost gauge afterall is a monitoring tool, rather than a vital engine function.

But I am a tightass, so take this with a grain of salt..

I've had $40 specco boost gauges in my last two cars, and have not had any problems over the years. They may not be the most accurate thing, but who knows whether they are not. A 1-2psi variance between actual and displayed should not a make a difference between engine failure and not (esp. with the stock turbo). They're definitely better than the stock gauge, and even many are happy enough just sticking with that as long as the car is tuned by an expert.

What Predator said.

If your car is running perfectly, then you've got no need for boost, EGT, etc gauges. You only need to watch them if you're having issues with the car, or you're a ricer.

You might get an inlet temp gauge since that's variable and outside a tuner's control, so you could manually set boost depending on the temperature. You'd have to be pretty hardcore to do so, though. Everything else should be a non-issue.

But if you're serious about driving and monitoring your car's readings, get something like the Defi gauges. You shouldn't be watching gauges when you drive, and with Defi you can set a "warning" level to let you know when something exceeds your limits, and use the "replay" function to see what everything was doing at the time of the alarm.

Well the reason I need a boost gauge are;

1) I am going to put in a mechanical boost controller. Without a guage, I might be running 30 psi (ok so slight exageration, but point is I wont know without one since the stock isnt overly accurate)

2) Once it is installed, and I have it set to the right level, it wont matter if it reads wrong as such, so long as i can see a spike. So I guess I can get a cheapy, get it set on a dyno, then just know when it spikes.

you can get the trust/gready quite cheap $118.63 at nengun and they dont need controllers or little digital boxs to run either and come in white ,black and silver and at the end of the day you know you can rely on it being accurate. :thumbsup:

this is the white one:nengun-product-288.jpg

agreed, couldn't have said it better preadator. if you must have a guage get like a $30 one, theres a trader in the for sale section doing swoosh guages for $40 ish each, oil, water, boost, fuel etc in colours that u can choose. serioulsy the best guage or "measure device" is the powefc hand controller, it shows all the values, holds max values and does graphs. handy as. if only there's a cheap easy way to get the powerfc to read boost without controlling it :)

io bought a drift one from auto barn for 50 bucks as i installed the same boost controller in my car. i ended up takin the controller out because the nut kept coming loose i dont know if its because i wasnt tightening it enough or what but i was gettin the shits with the boost changin all the time and i like my exhaust wheel right where it supposed to be not wedged in the cat or somthing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...