Jump to content
SAU Community

Recommended Posts

Hey everyone,

I had a car inspected today I was about to purchase. Its a 1989 R32 GTS-t 4 door auto. The pre-sale inspection revealed:

ENGINE HAS VERY LOW OIL PRESSURE

Needs air filter - coolant overflow lid missing

Caster arm bushes split

Left hand steering rack split

Steering rack leaking

Left hand rear strut boot missing

Rear discs need machining

Exhaust system has heavy corrosion

Rust in boot floor

Right hand light has moisture in it

The inspection was carried out by the guys at Brisbane Turbo & Tuning Center Woolloongabba.

They said that fixing the low oil pressure problem would require the engine to come out and then be put back in and would cost about $2k to have done by a workshop.

What do you guys reckon about the report regarding the car? I'm not familiar with how serious or non-serious a low oil pressure problem is, along with a few of the other issues. If its fixed will the engine be ok again or is there a chance it has incurred long term damage? Do all the things on the list have to be addressed and are they expensive?

Are these problems consistent with many 1989 R32 GTS-t's? I expected a few small things to come up.

Opinions please

Cheers :)

Jeepers.. that's a fair few things to fix on it.. personally - if the person that's selling it really isn't prepared to fix it or atleast reduce the price than walk away.. as everyone says - there is plenty more out there..

the car i'm just finished buying had 4 things wrong with it that an inspection picked up - they fixed all of them..

do you want to inherit all these issues??

just food for thought..

They tested it using the gauge, but they said they made sure the gauge was working first, as sometimes they are a bit of a problem and don't work properly.

I still might purchase the car if the seller fixes everything. My question is, taking into account these issues, will the car be in good condition once the problems are fixed or has long term, expensive damage been done?

Anyone have experience with the low oil pressure problem and what does it mean exactly?

Thanks

If you think thats a bit list, you should have seen mine when i got a RACV check done. Made the dealer fix EVERYTHING, then sent it to the inspection again to make sure it was all done. Then it was all fine :)

they looked at the stock gauge I bet you.. idiots..

ENGINE HAS VERY LOW OIL PRESSURE

not much .. either the oil pump is about to go and destroy the engine, or its all fine and nothing to worry about.. So I guess you need to establish for sure what the problem is. Oil pump replace I am not even sure is a full in/out job?? Mine reads pretty low, but car otherwise seems to run fairly well, I think its more the gauge.

Needs air filter - coolant overflow lid missing

bit of a worry on the airfilter.. no panel filter at all? engine could have been sucking a lot of dust and things for months.. not good.. coolant lid.. somebody lost it :)

Caster arm bushes split

common in older cars (mine were gone).. probably looking at about $250 to get those replaced... will improve steering feel / handling so not a bad idea to replace anyhow.. at least you know they are stuffed.

Left hand steering rack split

I assume they don't mean the actual rack itself (hope not!).. Do they actually mean *rack* bushes or steering rack boots? rack bushes hold the steering rack to the chasis.. rack boots are $15 each, and 1 hour job to change both.

Steering rack leaking

can be expensive if you need a reco'ed rack put in.. depends if its a couple of drops, or major leakage. Few hundred dollars to replace the rack.

Left hand rear strut boot missing

(Suspension) strut boot?? They are the plastic protective sheathes that sit over your shocks.. not too much, again.. if stock shocks I wouldn't worry.. I assume you will replace with aftermarket sometime?? if aftermarket coilovers, could mean dust and grit has got into the shock, reducing its life, may require rebuild.

Rear discs need machining

yeah, they always do.. unless its below minimum thickness, that is not a concern. replace rear pads at same time - may as well.

Exhaust system has heavy corrosion

yeah, they get that sitting under the car exposed to a wet road.. possibly salt in japan. Stock exhaust, again, how long do you plan on keeping that on? Otherwise annoying as it will rust through eventually - require new exhaust system.

Rust in boot floor

A fair concern.. could be others lurking under body, sideskirts, etc.. if its not just a little bit of red /oxidisation (which should be attended to anyhow), thats probably enough reason to walk away.

Right hand light has moisture in it

yeah, most cars can do that.. it has been raining for nearly 2 weeks solid up here afterall..

Look in the end, are you getting a really good price? Are these things required for you to get the safety cert? Do you plan on modifying the car and replacing these items over time? or do you want to leave everything "as is" for as long as possible, and just enjoy the car as is?

It sounds like, if workshop does the work, you're going to be hit with a $1500-$2k bill for all that work (assuming oil pressure problem is just the gauge).. If the car is still worthwhile (checking the rust issue carefully) after that cost, then why not.

anyhow, hope some of my rambling helps a bit.

Not that it means anything but what does the odometer read?

The other thing I would be concerned with is not what they found but what they didnt find.

Did they perform a compression or leak down test? How much does the seller want for the car?

Good question. I'm not sure exactly how they tested but the guy who owns the car asked if it was a faulty gauge and they reckon they eliminated that from the equation. Is there any real way to test if the oil pressure is low if these stock gauges are so bad?

Car has ~66,000km on it. I'd be getting it for a tad under 7K.

For that price it might be worth persisting with.

Get another workshop to test the oil pressure with an externally connected guage to confirm what the first workshop has said.

Secondly, confirm how bad the rust is in the boot. If its surface rust, you should be able to clean it all up and re-prime/seal and paint it to stop further problems.

Other major place for rust in skylines is under the rear wheel guards, make sure there isn't any rust there, by inspecting feeling underneath or looking for the rust bubbles in the paint work itself.

If it costs you for another inspection it still has to be better then risking it and buying a lemon if your not fully clued up on car mechanical and physical condition yourself.

16yo car with genuine 66k on the clock, not likely.

I wouldn't touch it with a 10 foot pole, even for the price (which would be pretty good if not for the oil pressure concerns).

On the other hand, if you can hook up a mechanical oil pressure gauge and do a proper test and it come's up good. Go for it. The cost of the the other replacement parts wont total more than 1k in parts and labour and you've still got a bargain.

Mine had a bit of rust in the boot. It hasn't got any worse in 2.5 years. It will be related to your leaking rear tail light most likely. Fix that and hit the rust with some converter and it'll be fine.

Its funny how many go "dont touch it all", and a few are "well its probably fine if checked out properly" :P

if I listed all the things wrong with mine when I imported (not that i really had a choice what turned up in the end) that any inspection would show up (half the same things as that car you are looking at actually).. you'd be going "no way".. Same price roughtly too.. But all of the things have been fairly minor wear and tear items, that could show up on a car 5 years newer and I fixed for low cost. Never has given me grief.. other than a fuel pump -- which was installed by myself, and not factory fit.

as others have said get a workshop to hook up a mechanic oil pressure gauge and get it rechecked if it comes out ok i would consider purchasing the car

mine has rust in the bottom of driver sill and some in the rear wheel arches that i slowly getting worse as i havent treated it (stupid i know) its fairly common now for jap cars to have rust in them as the quality of items isnt as good as it was a couple of years ago so you wont get the best of the best

mine has 98500k's on it and hasnt had one problem yet must say the best car ive had

it mostly comes down to what your happy with, if you think it is ok to you then buy it, if you have doubts then dont we can only offer an opinion but most ppl have been in a similar situation

i bout mine for 14k last yr prob spent about 1k on repairing things and replacing this includes timing belt and aircon stuff ive also spent around 1k on mods and thats all its cost me so far in 12months

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Why are people so insistent on making dirty water?!
    • Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...