Jump to content
SAU Community

WTB VG30DET Turbo. Busted if possible

Bass Junky

By Bass Junky,
in Wanted to Buy

 Share

Recommended Posts

zoom Community Regular

zoom

Posted
Posted
ARe you selling it?

Got pics?

i'm about to return it back to the seller becoz it wont fit the r33 dump. It's a 300zx single turbo tho! the rear turbine is the same as VL turbo. If you wanna use it as to hybri highflow i dont think it will fit!! You need something esle!! it cost me $550 which is too much anyway if you have to mod the dump or something and importantly i dont think CGC will do it. :werd:

i dont have the pics but look similar to your photo except it has only water cool line, unlike r33 where it has two lines (water & oil).

dennis

WHITE R32 Grand Master

WHITE R32

Posted
Posted

i still have my vg30det turbo unsure if its ceramic but i think its plain bearing (plain bearing = steel wheel???) and a rb25det turbo both may be in good order.... both spin fine and have good wheels i can supply pics and numbers to anyone who is interested.... i know the rb25 turbo is rb25 100% sure i was sold the vg turbo as a vg turbo im 90% sure its vg turbo....

EDIT:: after looking at that pic of turbo mine is different it has a short straight bolt on fitting on the outlet of the comp cover it is t3 flange and it came with a very flat angled oil drain fitting presumably cause the turbos are so low on the vg engines so maybe its a goer??

WHITE R32 Grand Master

WHITE R32

Posted
Posted

here are a few pics for ya.... the turbine wheel wasnt oily like that when u got it i oiled the chra and i think it has wept thru over time cause of the way it has been sitting....

the numbers i can see are....45V3 on the comp cover there is a 2 on the inside of the outlet of the comp cover....

it has a 45v on the turbine housing and a 8 inside the inlet of the turbine housing....

the outlet size of the comp cover is quite large also and there is no step on the inlet of the comp cover like a typical rb series turbo....

Bass Junky Grand Master

Bass Junky

Posted
  • Author
Posted

Check out these two pics.

One says 45v and A on the exhaust housing and

The other says OP6 and what looks like an E or and F

Both are apparently from a VG30DET.

ARGH

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Danowner
      Hypergear ATR45 SAT Turbo With addons (brand new - never used)

      By Danowner · Posted

      Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Julsmadrid
      RB25det

      By Julsmadrid · Posted

      Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • soviet_merlin
      Hypergear ATR45 SAT Turbo With addons (brand new - never used)

      By soviet_merlin · Posted

      Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • Danowner
      Hypergear ATR45 SAT Turbo With addons (brand new - never used)

      By Danowner · Posted

      I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Komdotkom
      R32 Gtst - Track Car

      By Komdotkom · Posted

      Great pic  
×
×
  • Create New...