Jump to content
SAU Community

Recommended Posts

hey guys/girls, just wondering what are the stocker boost levels for a 33 GTS-T???

also what kilowattage would my car be making as it is now??? ( its fairly stock, only minor mods so far.. HKS Pod and Blitz 3" Catback Exhaust ), but when i get me some more money i wanna get an apexi sfac and intercooler and mb up the boost a bit more.

thanks in advance. :D

Link to comment
https://www.sau.com.au/forums/topic/82511-boost-levels-for-a-33-gts-t/
Share on other sites

Stock boost for you will be 6psi with boost jumping up to 8psi at 4500rpm (when the solenoid is set to open).

That's exactly what I was running (aftermarket boost guage readings) with just a catback exhaust.

If you want a little more power before 4500rpm there's a thread here somewhere which shows you how to ground the solenoid permanently so it runs the higher setting (8psi) right from the start.

I did this before I got my mods and it made a nice difference :D

all good... if your on a budget, get one of those new "ball and spring" type boost controllers. cost ya $30 from ebay. highly recommend them. no spiking, good straight up boost. Put it on 10PSI straight away. Will notice a nice big gain from factory resulting in a lot more low end response. The back of your head starts to discover where the headrest is! :)

all good... if your on a budget, get one of those new "ball and spring" type boost controllers. cost ya $30 from ebay.  highly recommend them. no spiking, good straight up boost.  Put it on 10PSI straight away. Will notice a nice big gain from factory resulting in a lot more low end response. The back of your head starts to discover where the headrest is! :)

nah no budget, i have my own online business n i live at home still hehe, so i can afford 2 spend as much money on my car as possible..... for now lol :)

speakin of ebay but, theres sum "import" places that are selling sfac's and avc-r's n such, anyone ever bought an item like that from an ebay seller??? coz from what i know there cheaper than if you buy them from like autobarn or something but i dunno if there dodgy sellers or not, i dont wanna pay $300-500 bucks and not get anything sent to me...

No budget constraints?! niceee.... i would:

FMIC

3" Dump/front

Walbro GSS-341 Fuel Pump (best performing/price)

Nismo adjustable fuel regulator (better than Sard varient)

550 CC Injectors

Z32 AFM or Q45 AFM

Tomei Poncam (or just the camgears)

..and i hear Whiteline's "Pineapples" are top notch

Of course you'll need to dweal into the world of the electronic side of things, to control everything. Power FC will do, pretty much, it all.

You will have yourself a weapon of mass destruction. yay hope I haven't bored you

hahaha nah mate, actually thats some superb info, although i might have to only do half that for now, ive only jst got onto my P's lol, and been defected once already for the bov.... i was like.... come on man it just makes noise gheeesh, but i copy pasted your suggestion into a word file n saved it for future reference. :rolleyes:

yeah alota ebay sellers are genuine, i am one, thats my online business, but some are dodgy, especially the ones from china. .... " ugh yeah up for auction i have a HKZ Pob filter and a NIZMO short shifter " <<< stay away from people that advertise like that peeps that are'nt in the know.

buy everything from nengun or people on the forums with good feedback. forget ebay

powerfc $1500 tuned

electronic boost controller $300

fmic $1200 fitted

cold air box and pod kit $450 ish

some good tyres $900 for the rear

gtr fuel pump $250

exhaust $1400

run 12psi should make just under 200rwkw or thereabouts and the tune will fly

youll struggle for traction in first gear past 4grand and it will spin into second

perfectrun's prices are a joke

my car is running stock boost at 7psi, constant. it doesn't spike or roll of or nothing. am running a 3 inch exhaust and FMIC, but thats it.

strange how it varies from car to car.

Can I ask why you're only boosting 7PSI? I'd be up around the 10-12PSI mark myself with your mods.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...