Jump to content
SAU Community

Performance (Bang for Bucks) Oz vs. Japs?  

201 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

XR6T, The 360 modena, as you suggested is not speed limitted from the factory, and it doesn't hit 295kays according to gps,

Also have you ever look under one of these car, super-exotic, to see the extent of their makers go, trying to keep the car on the road at 300 odd kays.

  • Replies 261
  • Created
  • Last Reply

Top Posters In This Topic

I also have trouble beliving the 340km/h speed tag - As Roy asked - what size tyres, any gearbox mods? Diff mods? Gonna do some digging around and calulcaitions to see what RPM that would have to be at in a std XR6T for 337km/h

225/50 R16, whack it in drive and away you go. Around 6,500RPM.

XR6T, The 360 modena, as you suggested is not speed limitted from the factory, and it doesn't hit 295kays according to gps,

Also have you ever look under one of these car, super-exotic, to see the extent of their makers go, trying to keep the car on the road at 300 odd kays.

Reaching these speeds isn't as hard as you think, maybe open your mind a little. I know an owner of a 360 Modena V8 who has done 294km/h in it. A standard R8 Clubsport will do a little over 250km/h so yes, Commodores and Falcons can cope with this kind of abuse.

It comes down to a GTR with around 270-280kw at the wheels has the same power to weight as a Ford XR6T making ~330rwkw.

There is no doubt the GTR with its 4wd and lighter weight will be able to corner quicker, change directions quicker, and get the power down out of the corner much quicker.

The XR6T's 330rwkw power to weight is roughly the same as a R32 GTST making only 250-255rwkw. Roy's 234rwkw's ET being only 4mph lower and on street tyres is a good indication of this.

Then you consider the little GTST's making a shade over 300rwkw with a 5speed will run a low 11, (11.3, I forget the ET) with a set of small slicks.

Weight plays a big role. Much bigger than you realise.

You can't argue with facts. :cheers:

Edited by Cubes
Reaching these speeds isn't as hard as you think, maybe open your mind a little. I know an owner of a 360 Modena V8 who has done 294km/h in it. A standard R8 Clubsport will do a little over 250km/h so yes, Commodores and Falcons can cope with this kind of abuse.

LOL, Funny how you should say that, I've owned a 360 modena and has since sold it waiting for a F430, and I can tell you they do not hit 295kays period, disregarding what the speedo says. I also owned a carrera 4 for a short time and it also doesn't hit 300 kays, to hit 300 kays you need bloody long arse track or big speed bowl, even if you attempt it on public road, you might need about 10 kays of dead strainght road with no bumps, lol.

Also I can tell you this as a fact the carrera 4 took over 1 kilometre to come to rest from 290 odd, So doing this sort of speed on public road is driving beyond your visibility capability.

Fark my audi RS6 has twin turbo v8 from the factory just manage to haul it arse over 300 kays"unrestricted", This figure was achieved by someone else with similar car.

My skyline r33 gtst has over 570rwhp runs out of gearing at 280 odd but it not going to go over 300 going by the way it wants to lift of the road,

At about 270ish every cars in the world hit a brick wall of aero, and the falc. doesn't looks to aero to me, as compared to porsche-ferraris-Audis.

You might have all the power in the world, The one thing you need most to be able to do 300+ is AERO. This is what the Falcon has absolutely zilch.

Mx5's were designed as "the ulimite sports car" (or something) I feel that the japanese, when they want to build a sports car, look at the fundamentals. keep the weight down, good suspension geometry etc. Jap sports cars are usually designed as sports cars first, family car second. as I can interpret it anyway. with the current aussie crop (and the way it's always been since I can remember), it's the complete reverse.

jap sports cars are usually watered down versions of an all out sports car (save the main design ie GTR as to gtst etc)

Aussie sports cars are warmed up versions of all out family cars.

I know that BMW didn't get their reputation for being "the ultimate family car" lol. and if you think beemers are crap, hire out a Z4 for a day!

The focus of jap and aussie cars are at opposite ends of the spectrum. so you have to give credit to the Aussie cars when they can stick it with the big boys in a shootout. but I still know what I would prefer. Aussie build quality is still dubious, and although skylines are becoming more common, they're still far less of a "me too" car than commies and 'coons are.

I tend to feel that jap cars are all together more samuri sword where as aussie cars are more... Conans sword. That can be taken both ways, and the vids of the falcon prove that - man that things got some f**king balls!!! but I still think a gtr would whip it's arse given some corners. "power is nothing without control" etc etc, and the jap sports cars were designed with chassis to handle it.

That's my one eyed jap loving view anyway :) I still luuuurve v8 supercars and there really is no sould like a good v8... and I love v8 commy utes... in black... I would just never expect it to do what the skyline does with the same finesse...

I'd prefer a slim jap over a pudgy aussie any day ;)

hey hungry - did i mention i'm incredibly envious!?!?!?!? yoooou bastage!!! :lol:

Edited by jezzerrr
I also have trouble beliving the 340km/h speed tag - As Roy asked - what size tyres, any gearbox mods? Diff mods? Gonna do some digging around and calulcaitions to see what RPM that would have to be at in a std XR6T for 337km/h

I suspect the G-Tech thing probably says my car can do 280km/h :P

I dont doubt the G-Tech stated whatever speed, but consider the bigger picture, and i suspect its an error in the reading.

The big power CSV Commodore, has something like 340kws was able to pull 29# km/h. It was quick, 20-30km/h quicker then the HSV GTS that did in th evicinity of 26# km/h...but the test driver commented that she was a livewire...adn that was usign 5th gear as the engine didnt have the torque in 6th gear to overcoem the wind resistance etc. A 4spd auto...like i said, dont state it as fact when the means of measurement wont perhaps stand up to scrutiny.

R32s have a shock Cd, and with the power i have its evident once i hit 200k/h, the thing makes plenty of wind noise and acceleration tapers off abruptly. If i was lucky i may be able to do 250-260km/h :P

Anywa, im going to Mallala, will see if i can get a few Vic boys to come, and see how many SA boys we can get a long. There are a few Vic GTRs that you wont come close to...not because its a GTR, but because they are well modded and well driven GTRs. :)

I remember reading an article in MOTOR that was published about a year ago where they took a modified XR6T onto a airport strip and they managed to get 300km/h from it. Can't remember how much power it had though.

The the fastest XR6T down the track a few months ago managed 11.5-11.7. Now it's 10.4, done by a car with about 380rwkw. Saying all that I think the car in question here would be faster than the one MOTOR tested so I believe that FalconXR6T's car will get over 300km/h quite easily.

Edited by Vuster
Roy's 234rwkw's ET being only 4mph lower and on street tyres is a good indication of this.

Having a look at the mph friends are running with 210rwkws, and the fact that i dotn have a boost gauge, only a trick little hose to control boost. I think i was only running 14/15psi so had 215rwkws.

Car is at the panel shop now. New diff, new EBC & 20psi and good RE55s, i want a 12.3 at 118mph goddammit. If i can get my 60ft down to 1.9 then i shoudl be able to get low into the 12s. LOL thing is i intentionally have crappy 60ft times because of RB20 g'box syndrome :P

I remember reading an article in MOTOR that was published about a year ago where they took a modified XR6T onto a airport strip and they managed to get 300km/h from it. Can't remember how much power it had though.

The the fastest XR6T down the track a few months ago managed 11.5-11.7. Now it's 10.4, done by a car with about 380rwkw. Saying all that I think the car in question here would be faster than the one MOTOR tested so I believe that FalconXR6T's car will get over 300km/h quite easily.

Wasnt that the APS car...i think you will find it was manual with larger diameter wheels as well. Someone find the auto gear ratios and diff ratios of th eXR6, if mechanically irts possible, then i suppose its possible that the thing has so much grunt that it can overcome aero, and the drive could be a big enough lunatic to be relyign on twin piston sliding calipers and Ford production car engineering to be up the job of those sorts of speeds :P

I remember reading an article in MOTOR that was published about a year ago where they took a modified XR6T onto a airport strip and they managed to get 300km/h from it. Can't remember how much power it had though.

The the fastest XR6T down the track a few months ago managed 11.5-11.7. Now it's 10.4, done by a car with about 380rwkw. Saying all that I think the car in question here would be faster than the one MOTOR tested so I believe that FalconXR6T's car will get over 300km/h quite easily.

yep i remember that, it was 307kph

here is the link

http://www.aps-wrx.com/falcon/avalon/307kph.htm

on Avalon airport strip

I would love to know where it is that a car can wind out to 340kph, regardless of what the car is

yep i remember that, it was 307kph

here is the link

http://www.aps-wrx.com/falcon/avalon/307kph.htm

on Avalon airport strip

I would love to know where it is that a car can wind out to 340kph, regardless of what the car is

As you can see on the APS website the XR6T manual Phase III had 330 rwkw (see dyno graph), and it only struggled to manage 307km/h. (Not to mention a total lack of stability)

An XR6T auto with the same power doing over 330km/h on a open road...someone's telling fibs.

Edited by godspd
As you can see on the APS website the XR6T manual Phase III had 330 rwkw (see dyno graph), and it only struggled to manage 307km/h. (Not to mention a total lack of stability)

An XR6T auto with the same power doing over 330km/h on a open road...someone's telling fibs.

yep at the time I remember reading the drivers comments that it felt like the car was going to literally fall to pieces and it scared the shit out of him

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
×
×
  • Create New...