Jump to content
SAU Community

Recommended Posts

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

MYGTST,

Don't take this the wrong way, but are you sure? Most people say that they get movement from the HICAS when they don't use the kits.

If your right then I'll just unplug mine, no point spending $300 on a kit to stop a light coming on. And whats to stop us from taking the HICAS globe out of the instrument cluster.

Can anyone else confirm this?

See'ya :burnout:

it didnt move for me after a whole day at wakefield

i just unplug it when i want hicas disabled rest of the time i leave it on

it only takes a couple of seconds to unplug it

or plug it back in

if you want it removed permanently the best thing is to piss off the whole motor assy and put in a pipe like thishicas%20remov%201.jpghicas%20remov.jpg

I want to remove my hicas. I tried disconnecting it as said above but it still felt the same.

I am going to buy a removal kit. As mentioned above you can buy a bar to replace the electrics, or the Tomei lock kit which keeps all the original parts but prevents them from moving. UAS sell both of these items btw.

Is the tomei lock kit suitable for R33?

thanks

Greg

  • 4 months later...
Originally posted by TTZ32

HICAS is active above approx. 60kph and takes inputs from speed, steering angle, throttle position etc.

this is incorrect. HICAS works at any speed.

Start you car and get a mate to turn the wheel, and you'll see the ass end wheels wiggle around a small amount.

I've done it before on my R31 and a mates 31. Both have HICAS.

HICAS at low speeds turn with the front wheels and at high speed turns opposite the front wheels.

OR VICE VERSA.

I can't remember which but it has to be one way or the other.

Yer, it helps well going at 150km/hr+ to glue your car to the road, but i wouldn't know that of course..

I think its a useful thing to have unless you want to drift or building a serious track car.

Mr Rb20 - i think it was around 30-40kg for HICAS on a 32

Start you car and get a mate to turn the wheel, and you'll see the ass end wheels wiggle around a small amount.  
i dont totally agree with this!!! , ive read many expert reports about hicas stating that it only moves the rear wheels once in motion, except when put in diagnostic mode. I know my car doesnt move its rear wheels when stationary, i know the honda 4ws does,.... but hicas,....??

however the point about hicas working at any speeds is fairly correct. when i had a hicas error, which was small fragments of the horn blocking the steering angle sensor it obviuosly couldnt detect the angle of the steering wheel and hence couldnt compute the movement of the rear wheels. This made the hicas light come on. I could make this light come on at very low speeds, this is proof that hicas does work at speeds lower then whatever was quoted before i think 60kmph

but less traction

mine with the HICAS squats quite nice... with around 190 to the treads and it barely brakes traction and that's with 215's.

only breaks if i snap hard to second. but other than that the bit of weight may make a difference ?

maybe not in a full drag car where things are different but maybe for a street going one ???

hhmm... interesting.

what 20kg's less will induce less squat? c'mon...noone is gonna notice that, Are you suggesting that this weight diff and the effect this has on traction is an issue? I think you'd have to get an absonlutely perfect launch for that to be an issue, its less weight than a spare tyre...

I definitly wouldn't say your car is gonna Squat differently with or without hicas...20kgs as a percentage of the weight transfer of a car launching off the line to do a 13sec qtr must be negligable??

Russ

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This sounds like someone who would have owned an R33 in their past... It's okay, I'm 100% picking up what you're putting down Mark.
    • Just back on what was raised about jacking off the the tow/tie down point on the front of cars. I've used it plenty. I've also watched it on a car where you could see it move the front end of the car. It was like the front end/whole car being tweaked and twisted a bit. I will say, I struggle to find good jacking points on MOST cars. The ones that have good points, I then normally struggle to find a jack tall enough to make the car change height!   One of my go to points for either the jack, or the axel stands though, is either a suspension pickup point, OR a subframe to chassis major bolting point. I actually think its the subframe on my R33 that has a bit of a bend in it, from being jacked in the middle too. However, it could have been one of my many other cars I've had over the years! Or it could also be the from me jacking it up, and the fact the top of the front radiator support isn't there, so it can allow the front of the car to move and bend etc.
    • My apologies. I forgot we were talking about weird beard M series stuff. Had been talking elsewhere with someone about an R33 with similar subject and got confused.
    • Nope, I don't like the look of ND RF, or any ND really, I don't like their faces or arses, why, because of their "modern" lines, the NC, whilst "modernish" has a more rounded shape that I like Well, that's how my overly judgemental eyes see it anyway  
    • Should be more than fine, especially the overall fuel pressure would never exceed 3.5bar (assuming that thing never gets more than 0.5bar of boost in stock form). According to the chart, it's 11amps.
×
×
  • Create New...