Jump to content
SAU Community

Recommended Posts

My prob is the wheels I wanted only came in a 18x10 with a +18 offset, so on a r32 gtr I'm worried that I won't get clearance runing a 265 and I don't want to mess with ride height. The tyres are gunna be KU36's and I'm planing to do the od trackday on them. Wat do you guys think?

I run those offsets on my car with minimal hassle. Slight rubbing with stock suspension and the guards hadn't been rolled. Now has bilsteins in it and guards rolled no scrubbing at all.

how rolled are your guards? mine have been rolled in the back, but there is a slight lip there still, prob 5mm, were the orignal lip has been bent back on itself, The guy before me was running 18x10 +22 with a 255, but KU36 dont come in a 255.

any chance you could give me the ride height your car sits at? from the centre of wheel to the guard? also do u have any extra camber in the rear or front?

cheers

Got some rotas, Craziest offset I've ever fitted.

post-12712-1272975882_thumb.jpg

Skyline model = R32 GT-R

Wheel diameter = 18"

Wheel width = 9.5"

Wheel offset = +12

Tyre size = 265 35 R18

Modifications to fit = roll lip on guards, bit of camber

Other wheels are nismo 400R wheels,

post-12712-1272975957_thumb.jpg

Skyline model = R32 GT-R

Wheel diameter = 18"

Wheel width = 10"

Wheel offset = +15

Tyre size = 265 35 R18

Modifications to fit = roll lip on guards

Pics of the Rotas:

post-12712-1273715603_thumb.jpgpost-12712-1273715662_thumb.jpg

Right bit of an odd question guys, I've got a chance to get my hands on a set of Volk VSXX's, 17 x 8 up front and 17 x 9 on the arse. Going onto a HCR32, What offset/s will suit the car best.

Not interested in having them stick out, and if I can get away with it not rolling the guards. Just nice fitment without having to strech the tyres much or at all if possible.

thats a contradiction you wont get nice fitment without guard work and good offset.

fitment is a fine line no inbetween its either fitment, sunken or mexican.

what offset are the rims your looking at?

btm - they arent te37 copies.. more like bee R b5 or drift teks..

This is the problem I have, Offset for those rims is currently unknown. They arnt in QLD and aparently no offset numbers are on the rims.

All I can tell you is thats theres only about an inch of dish (yeah not really dish but still...lol) and the mounting face isnt very 'deep' in the photos.

I can roll the guards if need be but I cant see these rims really needing it if the tyres are steched a small amount.

Other than those rims im looking at Work Emotion CR KAIs, 17 X 7.5 and I think they are +35

:P:/ :/

stay away from both. first off the vsxx sound fair fail. the CR KAI's are gayer than aids.

if you want fitment for a 32 i'd think you should be looking in the 9 + 20 range scroll through some of the back pages you will be able to get a good idea.

you wont have scrape issues with 8" or 7.5" rims they are like saw blades the biggest issue you will have is it wont look good just wait for some good rims with good offset come up do it once do it right

This is the problem I have, Offset for those rims is currently unknown. They arnt in QLD and aparently no offset numbers are on the rims.

All I can tell you is thats theres only about an inch of dish (yeah not really dish but still...lol) and the mounting face isnt very 'deep' in the photos.

I can roll the guards if need be but I cant see these rims really needing it if the tyres are steched a small amount.

Other than those rims im looking at Work Emotion CR KAIs, 17 X 7.5 and I think they are +35

Don't bother with CR Kai's in that size. You wanna be looking at 17x9 +17 all round with 225/45R17's and a little camber. These will tuck with a decent ride height and guards rolled flat.

thats a contradiction you wont get nice fitment without guard work and good offset.

fitment is a fine line no inbetween its either fitment, sunken or mexican.

what offset are the rims your looking at?

btm - they arent te37 copies.. more like bee R b5 or drift teks..

Should have made myself more clear. Not the ones he bought, but the new ones Rota have released :(

Drifteks are just copies of Nismo's and BeeRs :cool:

Would anyone have any knowledge of how 17x8+5 (fronts) 17x9+11 (rears) would go on a r32 gts-t. No guard work apart from slight rolling on rear guards. I know the width is fine im just worrying about the offsets.

Hey guys, been doing a few searches but can't seem to find exactly what I'm looking for...

I've got 18x8's with 235/40/R18 KU31's at the moment.. not sure what offset.

I'm looking at fitting Lenso D1R HSPL's in staggered fitment and have been quoted as being R34 GTT Fitment:

17x8 +33mm Offset 235/45/17 KU36 Tyres

17x9 +35mm Offset 255/40/17 KU36 Tyres

Can someone confirm if this is correct.

Car is an R34 25GT Sedan with R33 4 Pot Brakes front and rear.

Thanks :P

Hey guys, been doing a few searches but can't seem to find exactly what I'm looking for...

I've got 18x8's with 235/40/R18 KU31's at the moment.. not sure what offset.

I'm looking at fitting Lenso D1R HSPL's in staggered fitment and have been quoted as being R34 GTT Fitment:

17x8 +33mm Offset 235/45/17 KU36 Tyres

17x9 +35mm Offset 255/40/17 KU36 Tyres

Can someone confirm if this is correct.

Car is an R34 25GT Sedan with R33 4 Pot Brakes front and rear.

Thanks :)

They are mildish fitment but as the tyres will not be stretched at all, they should fill the guards with next to no camber. I personally would be looking at going wider on the wheels, but your best bet is to fit something similar up and see if they are the look you are after.

I would suggest a 225/45R17 on the front as it is the same diameter as the 255/40R17 and will also give the car a far more even look.

Cheers for the help guys! I'm in Brisbane and the place I'll be getting these from is in NSW, so it's a bit hard to get a trial fit... I don't mind the staggered look, main concern is ensuring fitment with the Nissan 4 Pots and staying within the guards without any modifications.

R33 GTST

17x9 + 35 Front and Rear

235/45 Front and Rear

Coilovers (not crazy low) fitted. No mods to guards required. one of the fronts slightly scrubs sometimes on full lock. Rears look like they could sit out a bit further.... maybe 9.5 inch rim next time. Or +30 on the rear.

Would i have any clearence issues going to 255/40 tyres on the rear?

Also i think the circumference would change.....?

Any help would be great.

Cheers

Edited by rkinens
Would anyone have any knowledge of how 17x8+5 (fronts) 17x9+11 (rears) would go on a r32 gts-t. No guard work apart from slight rolling on rear guards. I know the width is fine im just worrying about the offsets.

sounds like it will be a touch mexican but nothing ridiculous. should come up good if you put the effort in :D

Hey guys, been doing a few searches but can't seem to find exactly what I'm looking for...

I've got 18x8's with 235/40/R18 KU31's at the moment.. not sure what offset.

I'm looking at fitting Lenso D1R HSPL's in staggered fitment and have been quoted as being R34 GTT Fitment:

17x8 +33mm Offset 235/45/17 KU36 Tyres

17x9 +35mm Offset 255/40/17 KU36 Tyres

Can someone confirm if this is correct.

Car is an R34 25GT Sedan with R33 4 Pot Brakes front and rear.

Thanks :cool:

since you dont want to do guard work or have em pokin out stick with these.. wont look great but wont be complete shit, i was of the understanding 18x10 +22 is a good fit on the 34 guards? a guy on here has/had them.. hunt around a bit will be way nicer looking

R33 GTST

17x9 + 35 Front and Rear

235/45 Front and Rear

Coilovers (not crazy low) fitted. No mods to guards required. one of the fronts slightly scrubs sometimes on full lock. Rears look like they could sit out a bit further.... maybe 9.5 inch rim next time. Or +30 on the rear.

Would i have any clearence issues going to 255/40 tyres on the rear?

Also i think the circumference would change.....?

Any help would be great.

Cheers

none.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...