Jump to content
SAU Community

Recommended Posts

a little stretch is good as there is less flex in the sidewall and you get better response from the tire. You have ordered the 235 already so just run with it....worse comes to worse replace when you are due for a new set with 255s

Yeah, i agree. The difference it makes is not worth the price but as you said, if and when i need to replace them, i'll go for the 255's. I am confident that 18x10 +20 rims with 255/40 tyres would fit on the rear however, i am not actually 100% sure so probably best to be safe than sorry.

Thanx for your help.

  • 2 weeks later...

Found out they are 19x10+17

Trial fitting tomorrow then choosing the tyre size. Bloke reckons prob 265 max on there.

Will put up pics when fitted. Fingers crossed. Definately going to fill the guards. lol

Pic of rims fitted. 19x 10 +17 255 tyres

post-24510-0-41383500-1354001574_thumb.jpg

No heights have been set up for track/curcuit and car counter wieghted each courner so low enough. Plus tyres hang out past the guards. Dont want to camber them as i will loss traction when car launchs.

More photos of my car.

Size: 18inch

Width: 9.5inch

Offset: 22+

Tires: 235/40/18 (the 40 could be wrong I cant recall it)

The backs could do with a spacer to add a little poke.

Currently has a fair bit of camber which I dont like.

Will get that fixed asap

_DSC3807_small.jpg

More photos of my car.

Size: 18inch

Width: 9.5inch

Offset: 22+

Tires: 235/40/18 (the 40 could be wrong I cant recall it)

The backs could do with a spacer to add a little poke.

Currently has a fair bit of camber which I dont like.

Will get that fixed asap

_DSC3807_small.jpg

I don't mean to alarm you but the stig is behind you..

what would fit nicer out of 18x9.5+12 and 18x9.75+20 on a r33 gtst?

interesting question however depends on what you want to achieve here. Couple of things below

  • Rims are virtually the same size only mm's (roughly 3mm wider each side) in it!
  • The +12 is still going to have more poke (towards the guard) by roughly 5mm of or so
  • what tyre size do you want to run? Again as its only 5mm give or take overall not much difference

hope that helps you a touch

Ok just picked up a cheap set of rims, not as good as some on here but there better than the standard ones on there now.

What will I need to do to get them to fit, just guard rolling?

Front 19x8 235/35

Rear 19x9.5 275/30

img1282fu.jpg

img1285ju.jpg

Sorry for my knob question but wont to know what im getting myself into this weekend when I try and fit them.

Thanks

what are the offsets? judging by the photo id say pretty high +30s low 40s?? my guess is not much at all maybe slightly roll the inner guard lip on the rear due to tyre size but should be a breeze

Edited by Frosty

interesting question however depends on what you want to achieve here. Couple of things below

  • Rims are virtually the same size only mm's (roughly 3mm wider each side) in it!
  • The +12 is still going to have more poke (towards the guard) by roughly 5mm of or so
  • what tyre size do you want to run? Again as its only 5mm give or take overall not much difference

hope that helps you a touch

yeah from what i worked out i dont think there is much in it at all,

was hoping to run a 215 40 or 45 or would i be better going a 225 35?

the reason i ask is the rims only come in 9.75+20 so was hoping itl fit with some poke

yeah from what i worked out i dont think there is much in it at all,

was hoping to run a 215 40 or 45 or would i be better going a 225 35?

the reason i ask is the rims only come in 9.75+20 so was hoping itl fit with some poke

yeah all those tyre sizes will be fine on that offset! see post #2208 with 235/40/18 tyres on R33 will give you an idea :D

Ok just picked up a cheap set of rims, not as good as some on here but there better than the standard ones on there now.

What will I need to do to get them to fit, just guard rolling?

Front 19x8 235/35

Rear 19x9.5 275/30

Sorry for my knob question but wont to know what im getting myself into this weekend when I try and fit them.

Thanks

Just put the rims on only just fit, will be rolling the guards.

Question, how close are everyones tyres to the struts, looks a little to close???

Will 265 help that much??/

offset 40+

img1296ok.jpg

img1295w.jpg

img1304cg.jpg

Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...