Jump to content
SAU Community

Recommended Posts

R377- Yeah they do, good spot! only the AME isn't quite as aggressive looking to me as theres more dish and less spokes,

on that silver r33 they look decent, and they are half the price I might add.

so you guys really think the 18*9.5 15offset wont fit well? I used to have rota Grid 18*9.5 30 offset all round and I could fit my index finger under the rear arch, the front had even more room,

post-70965-0-29682100-1390221575_thumb.jpgpost-70965-0-85245300-1390221652_thumb.jpg

235/35 on front with camber on front

Edited by AngryRB

personally, I got as much slack as possible from inside the bay and lengthened it by a couple of CM then zip tied it right up in the top of the guard above the rail

  • Like 1

@ Angry Rb.

I personally like these

http://enkei.com/rs05rr.shtml

heaps of sizes available

18x9.5 +22

18x10 +22 +30 ( I am quite sure the 30 would fit the rear, not sure about the +22 ?)

10.5 +25 +35 ( I am quite sure the 35 would fit the rear, not sure about the +25 ?)

Yeah they look pretty decent, only thing is the price tag :(

I am not sure what they are worth but here is a guide:

http://www.streettot...enkeiwheels.htm

streettotrack is a SAU sponsor. Autotechnik is on the silvia forums. Jesse Streeter

The tenjin look ok with the machined lip come in 9.5 +15

http://enkei.com/tenjin.shtml#

You said you had a silver 33, can check out these NT03's

http://www.fdrx7.com...read.php?t=7899

http://www.skylinesa...r-swap-or-sale/

Liking these rims, would 18*9.5 15offset be good with these or too much? want the back to be aggressive with a 235

post-70965-0-25386100-1390569832_thumb.jpg

with this wheel I think id be less likely to be pulled over, kind of looks quality over rota steroid look

Edited by AngryRB
Hi all,

Will these fit 1990 R32 GTR ?

Advan RZ-DF 19x10.5 +15

Badly want 19 inch but happy to

go down in width to 9.5.

Guards already rolled.

Any advise greatly appreciated.

Thanks

http://www.yokohamahk.com/products_detail.php?id=74

Tyre size 265/30/19

They also make these in 19x10.5 +25

Better option for R32 GTR ?

Options ? Advise ?

well obviously. but cops werent posted on every corner of the road years ago.....I had my old VW eating the weeds and throwing sparks off the exhaust on hard 2nd gear shifts back in the day. and never got hastled.

I'd like to think roads were better then too...but I'm sure it just bothered me less :)

Skyline model = R32 GTR
Wheel diameter = 18"
Wheel width = 9"
Wheel offset = +20 (+5 if reverse mounting the face on BBS LMs)
Tyre size = 265/35/18
Modifications to fit = None

Following pic is with +20 offset, next thing to do is reverse mount the face so that the wheel sits flush with the guards :yes:

20140108_171941_zpsd731d1bd.jpg

well obviously. but cops werent posted on every corner of the road years ago.....I had my old VW eating the weeds and throwing sparks off the exhaust on hard 2nd gear shifts back in the day. and never got hastled.

I'd like to think roads were better then too...but I'm sure it just bothered me less :)

we all had our 33's only 2 years ago tops...

In vic it has been that bad for aaaages

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
    • I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
×
×
  • Create New...