Jump to content
SAU Community

Recommended Posts

How much work required to fit 18x10+38 Work XD9s to the rear of a 32 GTSt?

Ive seen some older pictures on this forum of a guy running them but dont know how much drama there is involved fitting them up, pics dont look like theres much camber or poke..

Car is just gonna be used as a weekend toy (or even a couple times a month) so my care factor for legality is exactly zero.

Sooo many posts and couldn't find what I was looking for without dying...

Looking at putting Lenso D1Rs on my R33 gtst. What would be the best size and offset with out too much guard work (Rolled guards at the most)? Prefer 18inch wheels and must be able to hold 300rwkw decently.

Cheers

Buying a set of wheels for autocross in the US, looking based solely on what tires I can fit and offset etc not looks because of this.

It's a R32 GTS-t, I want to fit 235/45/17 in front and 255/45/17 in rear. If it can be done without rolling fenders it would be a bonus, but i'm not against doing that.
Most of the people fitting tires like that seem to have LMGT2 (+35 front +38 rear on 17x8/x17x9) and fit 255/40 in rear and i'm looking to see if there is an offset that would be better.
Trying to fit max tire within reason for this. Not looking to pull fenders or modify them aside from rolling.

Hey gots i just recently bought a set if rims for my r33 gtst they are 17x9 +35 allround now the rears fit perfectly but the fronts Rub on the control arm what and it was recomended that these rims would fit anyone know if these rims should fit the front ?? Thanks

Hey gots i just recently bought a set if rims for my r33 gtst they are 17x9 +35 allround now the rears fit perfectly but the fronts Rub on the control arm what and it was recomended that these rims would fit anyone know if these rims should fit the front ?? Thanks

Strange... The 34 is similar in the front as far as i know and i run a 18x9 +30 with a 265 tyre and it clears...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...