Wheel Sizes & Offsets For Skylines

[joeyjoejoejuniorshabadoo]

will not need to camber rears for 10+25 w245's

[re34perGTT]

Will I need any mods or spacers or guard rolling ????

Skyline model = r34 GTT

Wheel diameter = 17"

Wheel width = 9.5"

Wheel offset = +12

Tyre size = ?

Modifications to fit = ?

[niZmO_Man]

Yes

[joeyjoejoejuniorshabadoo]

lol

[sleptema]

Will I need any mods or spacers or guard rolling ????

Skyline model = r34 GTT

Wheel diameter = 17"

Wheel width = 9.5"

Wheel offset = +12

Tyre size = ?

Modifications to fit = ?

Stop being a moron. Go back 1 page, and look. Oh wow there is 9.5+20 there, ON AN R34! Oh and he has written the mods to fit!! It's almost like this thread is full of information or something.

[Cxxo]

Skyline Model = R32 GTST
Wheel Diameter = 18"
Wheel Width = 9.5 Fronts 10 Rears
Wheel Offset = +18 Fronts +15 Rears
Tyre Size = 235/40 Fronts 265/35 Rears
Modifications to fit = 20mm wide front guards 30mm wide rear guards
Fronts = 2.5deg neg camber
Rears = 1.5degs neg camber

Any many many hours fiberglassing
Is lowered cant figure out how to upload photos. everytime I use the photo/link button above and copy a link across from photobucket is freezes -.-

Edited September 16, 2014 by Cxxo

[sleptema]

If you go into the "more reply options" you can upload and attatch, rather than linking via a site.

Is lowered cant figure out how to upload photos. everytime I use the photo/link button above and copy a link across from photobucket is freezes -.-

[Nismo 3.2ish]

HI Guys, getting new tyres soon for my R34GTR.

I have Advan 18x10 +25 rims and they do not have the tyres I want in a 275x40 18 , but they have a 285x30 18 , would they fit without scrubbing.

[Marko R1]

I just went thru every page of this thread

I did have 19x9.5+25 with 245s and no mods were required...they are now sold i want jap wheels.

now im tossing up between the following for my r32 gtr:

1). 18x9.5+22 with 265s ('safe' option with gauranteed clearance on full lock & guards)

OR

2). 18x10+20 with 265s (will work with with no mods if i run nitto invo tyres, thx SIR-RB for the advice)

decisions decisions...also looking for other ppls opinions

[niZmO_Man]

I have option two on my car. Roll the guards and run 275/35/18 or fat 265's . You'll have to do more alignment work though to stop it rubbing on the inner plastic front guard things.

Either sizes are fine IMO.

[Marko R1]

Ok thx for the feedback

Would it be optimistic of me to think I can run 265s on 10s without guard rolling or is this simply required from your personal experience?

Where did it rub on your inner guards, on the front which sits directly behind the bumper bar right? What tyre brand are u running?

[joeyjoejoejuniorshabadoo]

Just roll all 4 guards anyway.

it's a 32 GTR not a 458 italia.

Safer option

[niZmO_Man]

Ok thx for the feedback

Would it be optimistic of me to think I can run 265s on 10s without guard rolling or is this simply required from your personal experience?

Where did it rub on your inner guards, on the front which sits directly behind the bumper bar right? What tyre brand are u running?

I rolled the guards myself (on the rear). Previous tyres bashed the lip out on the front guards lol. Rolling is required unless you car is high. It'll probably still scrub.

Yep the front part, because I used to run a bit more caster. Had to dial some caster back and add negative camber up front (around -2deg, -1.5deg rear). Caster is around the 5deg mark.

I'm running Falken FK452 at the moment. Previously had old Bridgestone TS-02 or something with more rounded shoulders so didn't need guard rolling.

If you're worried about not rolling, then get 9" and run 255 wide tyres. I would rather roll and try to cram the widest tyre possible .

[re34perGTT]

Model: r34 gtt

Wheel diamiter: 18"

Wheel width: 9.5" all round

Offset: +15 all round

Wheel size:225/40

Hi, I'm looking to buy a set of hks coilovers for my car and I saw these wheels for sale. If I bought these wheels how far could i lower my car before I would need rolling of the guards ? Also I'm not an expert on tires so while I'm posting this will 225's fit on 9.5's without any issues ?

[sleptema]

Model: r34 gtt

Wheel diamiter: 18"

Wheel width: 9.5" all round

Offset: +15 all round

Wheel size:225/40

Hi, I'm looking to buy a set of hks coilovers for my car and I saw these wheels for sale. If I bought these wheels how far could i lower my car before I would need rolling of the guards ? Also I'm not an expert on tires so while I'm posting this will 225's fit on 9.5's without any issues ?

If you leave it stock height with reasonable tyre profiles, you won't need a roll at all. But that offset is fairly aggressive, and if you lowered at all you would need guard rolling and 2 deg negative camber to fit inside the guards. And yes, 225's sit nicely on a 9.5.

Refer to previous page, I have 225/40 on 9.5+20.

[Marko R1]

I rolled the guards myself (on the rear). Previous tyres bashed the lip out on the front guards lol. Rolling is required unless you car is high. It'll probably still scrub.

Yep the front part, because I used to run a bit more caster. Had to dial some caster back and add negative camber up front (around -2deg, -1.5deg rear). Caster is around the 5deg mark.

I'm running Falken FK452 at the moment. Previously had old Bridgestone TS-02 or something with more rounded shoulders so didn't need guard rolling.

If you're worried about not rolling, then get 9" and run 255 wide tyres. I would rather roll and try to cram the widest tyre possible .

i had all my suspension dialed in by heasmans & i am very happy with it

i dont want to 'potentially' compromise handling for the sake of running wider wheels...from this, i purchased 18x9.5+22 & will run 265s as i was told this would clear.

now i need to decide on tyres - any recommendations?

nitto invo OR nt-05 sound interesting.

i get mixed feedback on the federal rsr's

[niZmO_Man]

Yep I'd choose the 9.5+22 as well with 265 wide tyres, only reason I have my current wheels is they're Nismo haha.

What's your intended use? There is a tyre thread you know...

[Marko R1]

Thanks mate

Street use really but I want optimum grip due to the power level I'm running...as long as the tyres aren't too sticky where they pick up small rocks and scratch the bodywork haha

[niZmO_Man]

Import some Pilot Super Sport

[CharlieCR]

Hi mates, first post on the forums.

I just got one of the first two R34 GTTs in my country (Costa Rica!) and I definitely want to change the wheels it came with...

I have read through this thread and a couple others and I arrived at the conclusion that some 18x8.5 +30 front/18x9.5 +38 rear seems like it will work with the all-stock car (please correct me if I am wrong here!)

From that, I am eyeballing the Work Emotion Ultimate Kiwami wheels and I am wondering if these will be a good fit.

Any comments and ideas are really appreciated!