Jump to content
SAU Community

Recommended Posts

I orded a cooler kit off http://www.slidingperformance.com/

The pic of it all assembeled is the one off the website, the otther fotos are ones i took, and some people added speech bubles.

Im very impressed, delivery was quick, no complaints. Ill keep posting how i go tonight cutting up my front bar and making hole fdor the return pipe.

:lol:

post-14959-1124702627.jpg

post-14959-1124702665.jpg

post-14959-1124702704.jpg

Edited by sproosy
Link to comment
https://www.sau.com.au/forums/topic/84956-got-my-cooler-kit-today/
Share on other sites

got teh pics in. teh cooler kit was $629 pipes and hybrid style copy cooler delivered.

i soughta f**ked it up a bit and mounted it slightly crooked, and in the fotos you can see my nicely scratched bar. But there is always tomorow to to fix up my slightly crooked cooler.

Over all it took me from about 11am until 5pm to pipe it up.

Last night i sat around with the dremel and cut the bar so the cooler could fit in. That took about 1 hour. And also 30 mins to mount the cooler.

Im sure lots of other people out there could do it quicker, but im a suit (white collar) and im not too good with this stuff sometimes as you can see by the crooked cooler. \\Next i have to do a dyno run with a little more boost and see what i get. From what i have read im hoping for 145 - 155rwkw.

Ill keep this thread updated.

post-14959-1124789608.jpg

post-14959-1124789671.jpg

post-14959-1124790149.jpg

Edited by sproosy
Awesome, trurly awesome.

I bought a Pizza last night, it was tasty - TASTY!

I cant get pizza's atm but if i can ship one in from Japan real quick you wanna buy one? :lol: rofl1yv.gif

Cheers Ryan

Edited by Slide

Well how long would it take you to do up 4 bolts? It didnt get all "wonked" until i connected the pipes up and the bar cause i f**ked up and knocked it and bent it when i lent agaisnt it. My bad!

Hence why i said "there is always tomorow"

Edited by sproosy
Well how long would it take you to up 4 bolts? It didnt get all "wonked" until i connected the pipes up and the bar.

Hence why i said "there is always  tomrow"

took me close to an hour to mount mine, to align the lengh in middle and the depth and to punch a groove to drill and so forth...

point is i would never be assed to take it off and do it again.

how did u knock it out of place?

Edited by silver gts-t
how did u knock it out of place?

i went to get up and i put my hand on it to pull myself up and i think thats when i did it. I check it all up and measured it and all that shit last night and it all looked good. i cant think of anything elses that would of made it move.

its up as high as it can go before i have to cut into the chasis which im not prepared to do. Ive got no problems with driveways and the like, the only thing that would be an issue would be the concrete blocks they put in parking spots so you dont drive too far forward, hence the scracthes already on the front bar.

Thanks for your concern.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...