Jump to content
SAU Community

Recommended Posts

I just had my car tuned...

R33 S1.5

Trust Front Mount

Full Exhaust

Nismo Fuel Pump

HKS 2535

PFC

At 14psi it pulled 244rwkw and is amazing to drive!!!

My new best friend will be the local servo i think!

I thought it would have terrible traction with the crap 326's but it doesnt! it actually pulls very hard with fantastic grip in a straight line. Of course its quiet easy to smoke the tyres through 2nd but the power delivery is so smooth it usually just grabs and goes!!!

I would recommend this setup to anyone for street use! more power everywhere!!!

Cheers!

Edited by silva33
Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/
Share on other sites

Ill have to take a photo of the graph with my phone and post it up...

INASNT; i bought the Apexi N1 off your friend and had them install it yesterday....

It is pretty loud but im sure ill get used to it...

Only mods are those posted... Stock injectors, no FPR or Z32.. max knock was around 30 on the PFC.. i dunno about the max duty of the injectors, i forgot to ask..

I was told it was making about 150ish rwkw by 3000 rpm and max power at about 6,500 rpm. (ill have to check it on the dyno graph though)

boost held to 13psi (from 14psi) till redline which i was not expecting..

Edited by silva33
Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1539896
Share on other sites

it did cost u big bucks??? hahaha

not really...

in this case, you get what you pay for... if you saw how stock my car looks you would know what i mean and considering i have been burnt in the past by previous tuners im more than happy to pay a little more for the service and quality...

Edited by silva33
Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1539943
Share on other sites

i just got my power fc tuned with my 2535 bolted up. Ended up with 231.1rwkw at 13-14psi. i do have a z32 afm and a nismo fpr and i'm very happy with the results. max knock is 11 and injectors get to max duty of 84% as far as ive seen. Like silvar33 my exhaust is a little restrictive. My tune feels very strong on boost but safe. Chasers tuned the car and they said on other dynos it might squeeze out a few more kw's but im happy with the performance of the car.

For those people who believe that a HKS turbo is a waste of money im happy to take them for a drive and show them the difference. No comparison compared to standard

Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1540132
Share on other sites

Sounds good reflex..

It would be good to compare the two cars it see how the tunes are different becuase if anything yours should be smoother than mine with the Z32 AFM

yeah mine is really smooth, i thought it be a bit laggy but its pretty good. im making full boost at 3000-3200rpm. oh yeah my traction issues arent to bad, got brand new tyres tho.

ill put up my graph tommorrow arvo, there isnt any significant dips in my curve and theres no spiking

Edited by reflex
Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1540546
Share on other sites

i just got my power fc tuned with my 2535 bolted up. Ended up with 231.1rwkw at 13-14psi. i do have a z32 afm and a nismo fpr and i'm very happy with the results. max knock is 11 and injectors get to max duty of 84% as far as ive seen. Like silvar33 my exhaust is a little restrictive. My tune feels very strong on boost but safe. Chasers tuned the car and they said on other dynos it might squeeze out a few more kw's but im happy with the performance of the car.

For those people who believe that a HKS turbo is a waste of money im happy to take them for a drive and show them the difference. No comparison compared to standard

hi reflex,

what injectors are you using?

Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1540667
Share on other sites

this is what ive come up with.

i bought my series 1 r33 18 months ago with basics

-3 inch exhaust

-boost controller

-pod filter

-rims

-bov

-fuel pump

-surge tank

-turbo timer

since then ive bought

-intercooler $400

-piping $250

-fpr $150

-power fc $1000

-hks 2535 $1300 exchange for standard

-z32 afm $220

-tuning $500

TOTAL - $3820

everything else is standard though

ive achieved 231 rwkw relatively cheaply, ive wasted plenty of money other crap like body kit, sound system, clearing defects, servicing etc.

for anyone out there looking to achieve strong, safe reliable results this is one option that you should look into.

this website is great for finding second hand parts in good condition

by the way my engine bay looks completely stock except for red rocker covers

Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1540706
Share on other sites

Dyno graph pls !

Sounds almost too good to be true dude ! with stock injectors no FPR or AFM !

He said he will post it up so give him a chance buddy <_<

Impressive power figure you and reflex have there.

Hope i get something similar out of the lil ol Rb20 of mine :P

Cheers B

Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1540717
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...