Jump to content
SAU Community

Recommended Posts

Don't panic.

I use regular unleaded in the jigger always. Rb20det, might not be making full power but it's certainly not pinging, that's what your right foot and the CAS are for.

I have found the regular starts much more easily than the PULP, just one touch and she's away. Same car on BP Ultimate has to crank away for quite a bit.

My only garage is a Matilda and their premium ain't too flash. Closest BP is 30mins away on the highway.

Link to comment
https://www.sau.com.au/forums/topic/85036-what-happens-if/#findComment-1542634
Share on other sites

ping ping!

in response to grigor... hmmmmmmm let's see:

extra $5per tank of petrol vs. $600-800 second-hand engine + labour + inconvenience + possibility of new problems with that engine

hmmmmmmmmm i might just go any put in what is was designed for myself

of course, its your car so best of luck with it

Link to comment
https://www.sau.com.au/forums/topic/85036-what-happens-if/#findComment-1542901
Share on other sites

I considered getting the car tuned for std. regular unleaded.

Then figured, $5 extra per tank.. bugger it. who cares.

I've considered throwing regular unleaded in it and watching the knock monitor to see how much of a difference it really makes. I would then pull ign. timing out until there is no longer knock.. It would be interestering. :D

Link to comment
https://www.sau.com.au/forums/topic/85036-what-happens-if/#findComment-1543063
Share on other sites

Come on guys!!! There is a difference between ping and knock.

How do you think your car was tuned in the first place? You advance up the spark until in pings then back it off a few degrees.

I don't have access to top quality fuel here in the sticks so I sacrifice a bit of power by winding back the spark.

What I said was don't panic. One tank of fuel won't kill it IF you use your right foot sensibly until it's been diluted with premium.

Link to comment
https://www.sau.com.au/forums/topic/85036-what-happens-if/#findComment-1543635
Share on other sites

my car pings going up hills with regular unleaded so i dont boost it at all on the rear occasions i have to use it.

if there is no other alternative to povo fuel i will just put in what i need to get to a servo that has PULP

Link to comment
https://www.sau.com.au/forums/topic/85036-what-happens-if/#findComment-1544581
Share on other sites

You should be OK if you drive the car conservatively, and your tuner has given you a street tune that allows for margin of error. I wouldn't go do a track day or the drags with it, though.

If you're using a piggyback or light tuning the factory ECU, the knock sensor and the learning functions should compensate.

If you're using a full aftermarket ECU (like a PowerFC), most of them don't have the learning function. It won't retard timing etc if the engine pings.

Occasional pinging isn't that bad (cars are engineered to sustain that kind of load occasionally) but if your car is constantly pinging (audible or not) then you're just causing undue stress on your pistons.

I'd use 91 to limp home if I was stranded in the middle of nowhere and couldn't get octane booster, but I'd put in as little as possible and be keeping an eye on my revs and throttle load.

Link to comment
https://www.sau.com.au/forums/topic/85036-what-happens-if/#findComment-1548389
Share on other sites

i did this in my stocky 33 and 32 gts-t's (only when i couldnt get premium).

I didnt have any problems. I didnt drive it hard.

If you need to tank up on 91 or 95 octane, please stay out of your boost range, otherwise your engine will knock if it is tuned for a specific fuel

Link to comment
https://www.sau.com.au/forums/topic/85036-what-happens-if/#findComment-1548685
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
    • Fuark, at least the motor survived. What brand was the fitting that snapped?
    • Wrong question. There's no point in spending the rather large sum of cash and effort to add turbo, without taking it to the "sensible" limit of the motor itself. If you have to upgrade injectors, etc, then so be it. That is a tiny fraction of what it will cost you to turbo it.
    • Measure voltage at the starter solenoid terminal when the key is at start and it has clicked. If it is really low, then the suspicion falls on the ignition switch (contacts or wiring thereof) as causing a voltage drop instead of sending enough volts to throw the solenoid all the way to engage the starter itself. If it is a decent voltage, then the suspicion is on the solenoid. Might have s horted coil, or might hva dirty contacts. Rip the starter off, dismantle, clean up contacts and inspect winding. It might not be possible to see if there is a short in the winding though. I have a spare starter here that I could measure the resistance of the coil, as a guide to about what it should be, if you need a comparison. <parts hoarder>No you cannot have it.</parts hoarder>
×
×
  • Create New...