Jump to content
SAU Community

I Got My Car!!!

FriniK

By FriniK,
in New South Wales

 Share

Recommended Posts

FriniK Community Regular

FriniK

Posted
Posted

after 6 years of jealosy and yearning for my liner...i finally got it...but theres 1 problem ...my bloody driveway is too steep...scraped the bottom of the lip when trying to get it down the driveway ...now my baby has to sit out in the cold :)

I think its time to get the construction crew in to fix up the driveway...

anybody know any quick fixes to get the car down a steep drivway?...

if so, where do i get the materials to solve the problem....??

Link to comment
https://www.sau.com.au/forums/topic/85565-i-got-my-car/
Share on other sites
Sl!m Grand Master

Sl!m

Posted
Posted

Yeh thats what I was going to sugest, planks of wood... work a treat. if they dont work.. then your driveway must be reaaaaaaaaly steep!!

welcome to the car owning side of SAU mate, it was about 4 yrs before I bought my r32 :)

Link to comment
https://www.sau.com.au/forums/topic/85565-i-got-my-car/#findComment-1548968
Share on other sites
MANWHORE Grand Master

MANWHORE

Posted
Posted

sledge hammer :)

but in all seriousness, I have to use planks of wood. if you go to your local bunnings, and buy some offcut 2x4 preferreably 2 bits 1m in length, and lay them down in the gutter.

I only drive my car on the weekend, so it'd not too much hassle, but it'd drive me nuts doing it everyday. If you leave em there, some little pricks might take em.

cheers

Link to comment
https://www.sau.com.au/forums/topic/85565-i-got-my-car/#findComment-1549063
Share on other sites
wilch Grand Master

wilch

Posted
Posted

buy a sheet of that thick checker plate alluminium (Bunnings Dural has them).

Lay that across the front of your driveway, use a hammer drill to drill into the concrete, and use some bolts to bolt the alluminium down. If council complains, unbolt and remove... Then replace when they're gone... :D

Link to comment
https://www.sau.com.au/forums/topic/85565-i-got-my-car/#findComment-1549525
Share on other sites
FriniK Community Regular

FriniK

Posted
  • Author
Posted

Thanks for the suggestions guys, ill give the planks of wood a go for now.....its almost impossible to go in on an angle because its such a small driveway, its not the initial gutter im having problems with its the flat bit just before it enters the garage...basically from the gutter its flat, then it goes down on about a 35-40 degree angle then its flat again ..its the bottom section i had probs with...

I'll stick pics up soon, but its pretty much stock looking sII with stock rims ....(next purchase)

Link to comment
https://www.sau.com.au/forums/topic/85565-i-got-my-car/#findComment-1549681
Share on other sites
SAWAKITA Rising Star

SAWAKITA

Posted
Posted

Need to go side way down.. used to happen to my ex-line with 400R front bar everyday (steep driveway). Just remember to let 1 front wheel reach the ground first then the other.

If still impossible, cheapest way is get a long timber and trim it suit ur driveway. I've seen few tyre shops use this way for customers with LOW cars.

Link to comment
https://www.sau.com.au/forums/topic/85565-i-got-my-car/#findComment-1549916
Share on other sites
FriniK Community Regular

FriniK

Posted
  • Author
Posted

IMG_2486.jpg

IMG_2500.jpg

My precious...

Still needs some pretty rims....

I should take it out for a proper fotoshoot when i get them...

Anyway ...thanks for looking ...

ill get a foto of the driveway to explain my dilema properly when theres light...

oh yeah...those halogen lights...is it illegal for me to drive with them on?

Link to comment
https://www.sau.com.au/forums/topic/85565-i-got-my-car/#findComment-1551863
Share on other sites
siksII Grand Master

siksII

Posted
Posted

at my old place my parents bought a sedan that was quite low, couldnt get over the edge going down to the driveway, within a couple of weeks they got construction people in, they jackhammered the concrete down and relaid half of the driveway so it was a smooth angle lol

Link to comment
https://www.sau.com.au/forums/topic/85565-i-got-my-car/#findComment-1552129
Share on other sites
satanic Grand Master

satanic

Posted
Posted

Huge thread (do a search for Driveway Problems) about driveway problems when I first got my Skyline (well after I lowered it :))... I have one bloody steep driveway and if it weren't for the planks of wood, my front bar would be no more :)

Pros for the wood:

1) They are very very cheap, use offcuts from anywhere

2) Quite light and not too hard to setup

Cons for the wood:

1) Not good in the rain

2) Gets bloody annoying when they start to rot away

3) Depending on your road surface, it will start to destroy itself.

My next plan is to get some steel drainage vents (maybe 2m x 1m) which I can mount on top of the driveway as stated above in a previous post. Not only will this get rid of most of the cons, but will also make a nice addition to my shoddy driveway :D

Just some thoughts...

Link to comment
https://www.sau.com.au/forums/topic/85565-i-got-my-car/#findComment-1564870
Share on other sites
FriniK Community Regular

FriniK

Posted
  • Author
Posted

Thanks for the suggestions guys, but the real problem isnt entering the driveway from the road, its at the bottom of the driveway. *see attatched* Ive tried reversing it in to no avail.. Close, but no cigar. Anyway, i think the only option is to tear up the driveway and build a new one.

THe red bits on the images indicate where the front would hit if i drove it down front first or reversed it in.

driveway1.jpg

driveway2.jpg

driveway3.jpg

Link to comment
https://www.sau.com.au/forums/topic/85565-i-got-my-car/#findComment-1575619
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
    • GTSBoy
      Blue/grey smoke after idle

      By GTSBoy · Posted

      The old approach was to fill the cylinder/chamber with a length of rope pushed in through the sparkplug hole. The new approach is to connect compressed air to the sparkplug hole and fill it with enough pressure to push the valves up. Doing either of these things with the head on and the engine in the car is a lot less pleasant than doing it properly.
    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • sunsetR33
      Replacing turbo water line - any recommendations or advice?

      By sunsetR33 · Posted

      One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
×
×
  • Create New...