Jump to content
SAU Community

Indicators Blinking real fast!


Recommended Posts

Well i had to pull my front 400r bumper off to fit my new cooler and in the process 2 of the bulbs in the indicators on the bumper broke, so i replaced em with new bulbs. We had to remove the fan for the AC also cause it was in the way of the cooler. Now my indicators blink real fast like there is a bulb not working, but they all work fine. Could it be caused by the plug for the AC fan being left off cause it was removed and its detecting this as a fault!

Here a pic of the front bar and cooler for those that havent seen it yet!

Oh and i got 183kw@wheels at 0.9 bar boost after the s-afc was retuned with the new cooler

attachment.php?s=&postid=126459

Link to comment
https://www.sau.com.au/forums/topic/8753-indicators-blinking-real-fast/
Share on other sites

Sure you replaced them with the correct wattage bulbs. I think the rapid blinking is caused by the system detecting the wrong voltage drop, which will vary according the the wattage of the globe. I can't see how the A/C fan would affect the indicator voltages. Otherwise you'd get different blink rates when the fan was on and when it was off.

i am preety sure i replaced em with the correct bulbs. How many different wattages do they come inm they r the 1'c with the 3 lipped end. Does the left and right indicators run off the same circuit so if 1 of the left bulbs r not working the blinker will still bink fast even when u indicate right?

heres my dyno graph 2!!

:)

attachment.php?s=&postid=127544

The increase in blinker speed is caused by a bad/faulty/short circuit

Same thing happens if you forget to connect your driving lights back up when you take the front bar off.

Sounds like your bulbs are incorrect

Originally posted by INASNT

no not yet, but i changed my headlight fluid and it didnt help either!!! :D

yeah? well give it a go dude...

It's probably the blinker fluids..and don't try and use the headlight fluid for the blinks, it will stuff things up...

Good luck with it :D

I did the same thing and they blinked too fast, either get the correct wattage bulb or place a resistor from Dick-Smith in series with the bulb, this will give it the correct volt drop and they should blink normal.

See'ya:burnout:

when i was working with cars and puting them back together and doing panel beating this was common... mainly cause one of the lights (as they run in series) isnt working.

when one stops working or blows then it puts the series out and starts to flash faster but generally only on the side which the bulb is affected.

Inark,

Normaly that is the case, that one of the lights has blown, but if you put in the wrong wattage globe then that has the same effect. Need to increase the resistance of the line back to what the original system was by adding a resistor.

See'ya:burnout:

Originally posted by INASNT

can any 1 give me the correct wattage for em. And remember its the 1'c on the front bumper. Thanks

Here is !! :P:D

Copied straight from my Skyline manual.

Head Lamp 12v 55w

Fog Lamp 12v 35w

Side Lights 12v 5w

License Plate 12v 5w

System/Rear Lights 12v 21/5w ???

Reverse Lights

Sedan 12v 18w

Coupe 12v 21w

Indicator Front 12v 21w

Rear 12v 5w

Cornering Lamp 12v 21w

So front bar indicators should be 21 watties.

J

Originally posted by Jay95R33

Here is !!  :P  :D

Copied straight from my Skyline manual.

Head Lamp              12v  55w

Fog Lamp                 12v 35w

Side Lights               12v 5w

License Plate            12v 5w

System/Rear Lights  12v 21/5w    ???

Reverse Lights

        Sedan        12v 18w

        Coupe        12v 21w

Indicator Front    12v 21w

              Rear     12v 5w

Cornering Lamp  12v 21w

So front bar indicators should be 21 watties.

J

thanks jay!

Originally posted by GTS-t VSPEC

Jay,

You have a Skyline manual, how did you score that?

See'ya:burnout:

:P :P

It's just the owners manual... Not the workshop manual :P

I'd looooove to get hold of a workshop manual.

My last cars I'd always get a Gregory's manual so I could work on the car myself. With the Skyline I'm a bit nude, but willing to get in there and give it a go.

J

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...