Jump to content
SAU Community

Recommended Posts

Gday,

I have r32 type M gtst brakes on my cefiro with the associated 5 stud conversion.

When I drive slowly every rotation there's a squeek as if the pad is touching the rotor. I've been told this is because it's warped (funnily it happened shortly after machining).

Some r32 GTR rotors have come up and I'm wondering if they will be a straight swap. They're probably bigger but if they will swap in that's fine.

If not what would have to be done to get them in? Get r32 GTR calipers too or is it more involved than that?

Cheers!!

they are quite a bit thicker. off the top of my head it's 32mm vs 28mm. you could maybe just use them with some pads that are 2mm worn (each pad). i guess that would work. only one way to find out mate :P

It's only the thickness?

Well it's come from a GTR so I can't imagine it having 32mm left .. I just want my freakin brakes to stop SQUEEKING when I'm rolling. It's damn annoying and makes my car sound like a piece of shit.

ok but minimum thickness still applies which on a GTR rotor is 30mm (or maybe 29mm?). so it will need to be somewhere near 31mm to be worthwhile using at all.

dare i ask why not just buy some GTST rotors??

thanks for that yogi. seems i have been talking out my arse again...oops.

in that case CC they won't just bolt on mate. again i am still wondering why you don't just buy some GTST rotors? will make things nice and simple. :mellow:

Thanks very very much yogi and Richard.

I only asked because they came up from Morgs - who happens to live near me and I've talked to before so.. yeah it was only an opportunism thing.

Thanks again guys.. Looks like I'll have to sort something else out :mellow:

i've upgraded my r32 gtst to gtr rotors and calipers and they fit under a r33 16inch rim. It was a simply bolt up....no stuffin around.

if you want to keep your calipers with GTR rotors you will need an adapter plate. Roy did something similar but used 324mm rotors.

just spend another $385 and get yourself some calipers from your local wrecker. I used just jap.

cheers

George

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. This is just my curiosity because iam sure the tuner figure something out...but either way i want to ask. The "problem" is that the Nistune ECU (Stagea FW and RB25DET NEO from Stagea) sees many times the speed than the speedo does(he says the speedo show 120 km/h - correct speed and the ECU shows like 510km/h ) I told him that this car/tranny getting speed from rear diff. If iam not mistaken the RB25DET NEO "need" to see tranny speed sensor? (my tranny has the plug for it). So couple of "question" If he connects/wire the speed sensor to the tranny...are the signals gonna intervene and if...what if he disconnects the rear diff one and the speedo stops working? Or the "new" sensor from the tranny "take over" and will not going need the one from diff? As i said i know he figure/get that done...iam just curious to know what are the solutions 🙂 
    • Your IACV is set to idle too low. You need to adjust it via the screw Duncan mentioned. From memory it should be 650rpm with the valve electrics unplugged. What is it trying to idle at with the IACV plugged in?
    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
×
×
  • Create New...