Jump to content
SAU Community

Recommended Posts

ronin09 has tomei poncams w standard turbos. i'm sure it's been done plenty of times. I have adjustable cam gears on mine with standard turbos also. i found a similar gain by adjusting them (around 30rwkw). both our cars are running at ~250rwkw.

ronin09 has tomei poncams w standard turbos. i'm sure it's been done plenty of times. I have adjustable cam gears on mine with standard turbos also. i found a similar gain by adjusting them (around 30rwkw). both our cars are running at ~250rwkw.

what he said^

just under 14psi for me. cams are standard cams with an hour or two spent adjusting both inlet and exhaust cam timing.

from memory ronin has the 260/260 duration Tomei poncams (9.5mm lift?). also running around 14psi.

interestingly i was just comparing our two dyno graphs. my peak was 253kw as was ronins (though we tuned a bit further and ended up with 247 peak, but more mid range torque).

Comparing at points along the graph it's interesting to see that ronin has just a few more kw's at each point but the shape of the graphs are virtually identical. interesting that two different set-ups tuned at different places ended up with near identical figures, and identical curves!

from memory ronin has the 260/260 duration Tomei poncams (9.5mm lift?). also running around 14psi.

they are the same cams i have in my gtr, i have standard turbos.

im not sure how the new cams are yet..

interestingly i was just comparing our two dyno graphs. my peak was 253kw as was ronins (though we tuned a bit further and ended up with 247 peak, but more mid range torque).

Comparing at points along the graph it's interesting to see that ronin has just a few more kw's at each point but the shape of the graphs are virtually identical. interesting that two different set-ups tuned at different places ended up with near identical figures, and identical curves!

I'm slow in the uptake today.

what he said. 260 / 260 9.15

I wouldn't expect too much gain on stockers, apart from boost coming on a little lower - BB - I don't have plot of PSI vs power, but can you compare where boost / power ramp ups are between the two graphs.

They will help breathe alot better with some slightly larger twins.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...