Jump to content
SAU Community

Recommended Posts

Has anyone had to change their brake master cylinder in their 32 gtr ?

Mine is leaking and in need of replacement but iam having trouble finding a new one. Would anyone know where i could get one ?

Thanks

Tim.

Most good brake shops will be able to recondition the master cylinder for you - you will have to do without it for a few days. Approx $200 is the asking price.

Just a word of warning - insist they get the seals etc in their store BEFORE you give them anything & check they have done a GT-R one before. I got caught like that by two different shops & had to swap units between my cars.

Just made a few calls.....

ABS said they have no listing for new master cylinders or kits but they could recondition the one I have using parts and seals from other kits. This would cost about $300 to $350 but he hasnt done a GTR before and cannot guarantee it can be done.

Nissan said $620!! for a new master cylinder and

$174 for a kit.

I think i might be best to get the correct kit from nissan and get a good brake shop to recondition it. But iam not sure ??

Tim.

  • 1 month later...
If Nissan have a kit, then use that. The guys at ABS should be able to work with it.

Do you have a part number for the KIT?

It would save my life if someone can post it. The local NISSAN dealer will get it if I have that magic number.

Regards

Mark :)

Hmm, I am having problems with my Master Cylinder too at the moment. Feels like theres air in the system and the pedal is really squishy before I start the car.

I am pretty sure mine is just the seals and may just need a kit, and I can guarantee its gunna be more than $174 from Nissan in Perth :)

32 and 33 GTR are apparently different I've never had the two side by side though.

Master cylinder v air in the lines.

Air in the lines - when you put your foot on the pedal it is really mushy, but if you pump it a time or two it comes up nice and hard

Master cylinder leaking - when you put your foot on the brake and hold it, your foot sinks slowly to the floor.

Air in the lines - when you put your foot on the pedal it is really mushy, but if you pump it a time or two it comes up nice and hard

mine is like that, but it takes a damn while to come good. I mean like 45+ seconds before its normal and then throughout a drive its good

I should have said, air in the lines is very easy to fix, you just need to bleed the brakes. There should be a thread on here about how to do it.

If it hasnt been done for a while run a whole bottle through first make sure its clean and bubble free.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...