Jump to content
SAU Community

Recommended Posts

Gday to all you R32 guys...

I have an R32 GTST and after say 10mins of highway driving at say 70km/h+ my car feels as if it loses its rear grip for a half and instant - scary stuff. My HICAS light then comes on.

I have deduced with the help of my new mechanic that it is the HICAS system changing the steering direction of the rear wheels. When you first start up the car apparently the rear wheels steer in the opposite direction to the front but after several minutes of driving they revert to the same direction as the fronts / / to / /

/ /

if you know what i mean...

My question is... does your R32 suffer this herendous and sh#t scary tail wag as it changes??? When i say scary i mean drift style sideways (so it seems)...

Your feedback is much appreciated...

Link to comment
https://www.sau.com.au/forums/topic/8970-r32-gtst-hicas-scary/
Share on other sites

Mine's fine, never had any probs with it in the last 14 months. My hicas light used to come on but it was caused by a leak in the power steering pump. The light is only a warning to tell u if its not working. The hicas only moves the rear wheels something like 1.5deg either way depending on speed. Hope this helps :D

Mine does the same thing. I have almost taken out cars when you get caught in rydges in the road. Bloody scary.

My hicas light is on and my steering has gone heavy. I think it might be the power steering solenoid down near the rack.

Let me know if you sought it out.

Doc

Cheers guys...

yeah Doc, that's it - it goes really heavy and sometimes my car actually stalls if it occurs at slow speed.

I remember now that my mechanic said it had something to do with the aftermarket steering wheel i have because the sensor is apparently linked at the steering wheel and when they fit an aftermarket jobby it screws up the system somehow.....

Haven't had any problems with my HICAS on the hwy. Did save me from a great mess once though when I saw a turnoff too late and hooked it hard left at (undisclosed)km/h.... Instead of sliding off the road and into that big tree...I was carried merrily on my way & into the corner - felt bloddy wierd!

When I first start the car, I have to turn a left & right a little before the steering becomes light again.

Also If I idle the car for too long the HICAS light comes on. I've tried running the diagnostic, but it wouldn't work :confused:

MY R32 gtst won't show the hicas light at all. Full stop. There is no light from what I've seen. It seems to turn o.k, but i've NFI if the 4ws is actually working or not. The computer is still plugged in under the rear parcel shelf, the rack is still there, all of the hydraulic lines are still there... I dunno?

Steve

mine isnt really disabled properly it just doesnt work lol

im waiting for Dr-Drift to come over with my pineapples so i can pull the plug on the hicas and disable it properlly... but if u ask me... its a hell of a lot better... i hate how it pulls to certain sides when driving before it stops working... even before i stuffed it i hated the feeling it gave when turning.

Had the same problem and took it to givin wood on the gold coast.

The problem was the steering selector for the hicas.

It seems that there are two types and on one the selector is at 38 degrees so that at speed the thinks it is in a permanent left turn. this problem is only fixed with the correct part or by a hicas lock kit.

  • 3 weeks later...

I've never had any issues..

Just a question for all those who are saying that they have a hard to turn steering... have you checked the power steering fluid recently?

Have you changed it at all?

As for the drift pineapples... they do not do anything for the HICAS. I believe that they are simply for stopping axle tramp, and allowing you to set your car to drift a bit more stable.

The only way to disable HICAS on our R32's is to get a proper lock kit.

You can't just disconnect the computer cause that means that the rear is then able to turn 1.5 degrees in any direction the road drags it.. NOW THAT would be scary.

When your HICAS is working properly, it only works when you are traveling above 80kms. And it ONLY works to turn the rear wheels in the SAME direction as the front to make lane changing on the highways, a smoother process.

So this thing about your mechanic telling you that it turns opposite at low speeds and same at high speeds is false.

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Started sifting thru my brakes to decide which ones I will run on Clem   Made me think I should just put them all on Silver...for when brake fade just isn't an option   Should be able to bump rotor up from 343x32 to 348x36 off Supra. Not sure if the Supra annulus is right for the Alcons or APs but trying g to find a used Supra\M4 rotor to test fit The Alcons seem to gain 1-2mm clearance which all helps  
    • So car is getting a few mods to the cage and some jacking points welded in Meantime Ol Silver gets a new gearbox and shiny clutch.  Old Box is being set aside for Clem  
    • Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
×
×
  • Create New...