Jump to content
SAU Community

Recommended Posts

i currently own a 1999 wrx evo 3 club spec totally stock.I bought the car about 2 weeks ago and it seems that the engine is choking at low revs,also i get a rotten egg smell when i stretch the gears.I took it back to the dealer about the problem and they changed the air flow meter but it still does it.If anyone could tell me what this problem is i'd really appreciate it.

Edited by DFECTV 33
Link to comment
https://www.sau.com.au/forums/topic/90098-wrx-problem/
Share on other sites

i currently own a 1999 wrx evo 3 club spec.I bought the car about 2 weeks ago and i get a bit of lag or it could b that5 the engine is choking.I took it back to the dealer about the problem and they changed the air flow meter but it still does it.If anyone could tell me what this problem is i'd really appreciate it.

Is it stock ? What do you mean by " i get a bit of lag " ? Slow to respond or missing ? Stock rexes are not laggy at all .

Link to comment
https://www.sau.com.au/forums/topic/90098-wrx-problem/#findComment-1625122
Share on other sites

dont hold me to this but i have been told that that ROTTEN EGG SMELL is from a new or near new cat convertor.

i have experianced this personally with a really expensive system i had fitted to a previous car, it was that bad that i had to take it back to the shop i didnt even want anybody to sit in my car it was that bad but it slowly went away.

Link to comment
https://www.sau.com.au/forums/topic/90098-wrx-problem/#findComment-1625787
Share on other sites

Yeah, a WRX forum would be the best to post it on.

The "rotten egg" smell is sulphur, and I noticed it in my first car (which was designed for Super) when I ran it on really shitty unleaded, which has a lower octane rating. Dropped in some Super or Premium, and it was fine.

What kind of fuel are you running? Not just the octane level, but the brand. If you're putting regular unleaded from some dodgy independent (or even dodgily-run brand name place, really) then:

1. Why are you driving a WRX, or any sports car, if you're going to do the automotive equivalent of making an athlete drink sewage?

2. Try running it on Shell, Caltex, Mobil or BP Premium.

I don't think its a new cat problem. When I got my car it had 24km on the odo, and it never stank. It's also only ever had 3 tanks of anything less than 98RON fuel go through it, too. The old man's last 2 cars, which was designed for regular unleaded, has never stunk up either. But then he's always run it on Caltex for the first car, and then BP for the second.

It could be that the cat isn't screening out all the sulphur from the exhaust, though.

Edited by scathing
Link to comment
https://www.sau.com.au/forums/topic/90098-wrx-problem/#findComment-1626211
Share on other sites

its totally stock and it seems like it misses more than lag...at low revs its pretty bad

It sounds like you have a miss not lag , it could be anything from spark plugs, coils or any electrical problem if only at low rpm, its hard to say when you cant describe exacly what it does . Take it to the dealer and let them sorted out .

Link to comment
https://www.sau.com.au/forums/topic/90098-wrx-problem/#findComment-1627168
Share on other sites

Is this from a Subaru dealer, or just any run-of-the-mill used car shonky dealer?

If he's a Subaru dealer, then report him to Subaru for being a di(khead - any mechanic worth his salt will know that the rotten egg smell (H2S - Hydrogen Sulphide) is caused by a faulty catalytic converter and/or too much sulphur in the fuel in the first place.

Link to comment
https://www.sau.com.au/forums/topic/90098-wrx-problem/#findComment-1628931
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...