Jump to content
SAU Community

Recommended Posts

  • Replies 115
  • Created
  • Last Reply

Top Posters In This Topic

and to say the 33 doesnt look like any skyline at all....its as close as you're gonna get (appearence wise) to an R34, without it being an R34

32 is more like a 33, just enlarged

31 (HR imports) and 34 put side by side have a lot of similar styling influences IMO.

Just some of the reade 1/4 lines and what now are very shaply

Ill say one thing I would by a 350z over it any day. I will treat is as a work in progress, it looks a lot better than the sketches so hopefully they will make the same headway with the actual production vehicle.

i reckon it will change over the next year

it is a concept and it will be heavily scrutinised by the public, journo's etc.

Loz

True.

The back looks unreal.

Would have been better if it had R34 style or similar headlights.

Looks great, with great potential.

Engine specs anyone?

yep, sadly i'm pretty sure the rb will not be seen after r34.

judging by the quad exhaust the new gtr will more than likely be V8 too...

Turbo v8 right?

Best of both worlds.....

Like most comments...I don't mind the overall look but that rear pillar will have to be worked on as the angles just look all wrong.

As for the engine the quads do suggest a V8 but I hope they stick with tradition and turbo it. Would also make it easy to sell in america by just removing the turb's...

while there's been plenty of talk about an 8 powering the new cars, i reckon we'll see a twin turb v6. nissan has poured plenty into their latest crop of v6's and, by all accounts, they aint too bad. one thing for sure, the inline 6 is dead *kicks and screams and flails about unhappily*

d

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...