Jump to content
SAU Community

Recommended Posts

@ whippet, I cracked a 488km/h in the RUF CTR2... and i've heard of other on the GTPlanet forum who have hit in excess of 510km/h, try advusting the downforce on the car as well. Although I should tell you if you adjust way too much downforce on the rear and not enough on the front, the car will do a wheelie.... but i garentee that that 510 mark will be history.

Also try a car like the Minolta 88-C (i've seen it hit 516 kph) or the mercedes sauber, these cars are by farr quicker than the Bentley.

Check out this thread for some insane top speed records.....

Woah.. and i though i had a high speed. Very Nice

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...

how the heck can you guys drift in that game? It's do-able on GT3 but on GT4, the cars act retarded. I've got traction control off but it just acts gay and doesn't drift smoothly. WTF settings are you guys using?

7.503 c-spec wrx :D:D

spent 2 hrs tuning it though  :(

any of you guys use the logitech driving force pro? its awesome fun drifting using it  :(

sorry if this has been covered before, but what steeringwheel/pedal set is the best for GT4?

What do you guys use?

i'm considering buying one as trying to drift with the stock controller is very hard, its either full throttle or nothing (using the X botton for gas).

i use the Logitech Driving Force Pro

It has the ability to rotate the wheel 2.5 times, thus meaning an absolute handful to try n drive, especially with a fast car!

But makes drifitng an hell of alot of fun!

i have it mounted on the top of an old computer table that comes off, great height n is sturdy as. Its in an U shape.

Comes with plastic clamps to clamp it down, pedals also have a fold out grip thingy me bob underneath u fold out to help it stick to the carpt, n hell does it stick! I cant move it even when im jumping on the pedals lol

i have it mounted on the top of an old computer table that comes off, great height n is sturdy as. Its in an U shape.

Comes with plastic clamps to clamp it down, pedals also have a fold out grip thingy me bob underneath u fold out to help it stick to the carpt, n hell does it stick! I cant move it even when im jumping on the pedals lol

cool, i'll have to look into the logitech.

Do all the steeringwheel sets that come with a gearstick have the stick on the right side of the wheel? as like U.S and europe where they drive on the right side of the road?

I would prefer one where you change gears with the left hand, like real life :blink:

I hit over 500km/hr today - (504km/hr to be exact :D) I dont think anyone has used this yet, but I got it with the Chapparell (spelling) I think it is the 2J racecar? Scary looking box thing, have a go, its f*kin fast! :)

  • 9 months later...

my speed is without any gamesharks or anything like that. you just get the escudo, put full downforce on the back, and none on the front, give it the full turbo kit and lengthen the gears a bit. you accelerate up to about 400kmh then the front wheels start to lift off the ground and the speed goes through the roof.

my speed is without any gamesharks or anything like that. you just get the escudo, put full downforce on the back, and none on the front, give it the full turbo kit and lengthen the gears a bit. you accelerate up to about 400kmh then the front wheels start to lift off the ground and the speed goes through the roof.

yeah i got my speed without any real cheats...twas all settings being adjusted

I got around 7.6sec in the escudo 0-400m but the one i was most impressed with was my audi rs4 STATION WAGON pulling 8.777sec. That car has incredible pickup even if you don't launch it, it just goes. Easily one of my fastest 0-100km/h cars... i love it

  • 1 year later...

shanef' settings please!

i have the spec c wrx aswell and have recorded many 7.8sec pass's but my most impressive one was in the R34 GTR Mspec NUR at a 8.02 sec pass so close to a 7 sec pass its not funny but havent played it in ages!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Maybe it's time for a M3 F80 LCI, and leave it stock.  Drive it to a shop, sip on your latte with nutmeg whilst it gets serviced and on the way home swing by and grab some chai mix for the evening.
    • Great work! Thanks for documenting the process.
    • How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
×
×
  • Create New...