Jump to content
SAU Community

Recommended Posts

yeah, thats what i was thinking, there could be a problem with the map in it..

No doubt your tune is saved so why dont you just try putting another base tune on it to get it fired up???

UPDATES FOR ME: 1/4 window fitted thanks to Matt @ Highway Crash Repairs, new oil cooler core purchased (thanks JUST JAP) and on its way so all thats left is a Z32, install new SABER gauges (thanks to FLYNN PERFORMANCE) and coils (thanks BENSON MOTORSPORTS) and its ready for a tune :P

Oh and new set of Proxes 4's ordered (thanks to Hamish @ REVOLUTION)

Fresh(er) RB20DET (from R32) fitted, GT-R injectors, AFM and Nistune...injector o-rings leaking so back apart to fix those, blanked off knackered cold start regulator. Need to get wideband on to start tuning it as currently it just idles at about 2500rpm and dies when you touch the throttle.

Also chucked in 3" split dump/front pipe, all redtop covers on silvertop RB20, ISC 10/8kg S13 coilovers, 17x9/17x10 meisters and waiting on my rotors to be redrilled so I can chuck my R33 4 pots on the front. 11 row greddy-copy oil cooler kit to go on.

Still need a shifter as mine went walkabout while the car was stored at a certain workshop which is now defunct...

Also yet to order front mount and new front bar, but will be soon.

33 - had a flat yesterday and who knows where the locking key has gone... vice grips to the rescue!

rx7 - the dust is growing thicker by the day, but paul is now back from japan so hopefully we'll have an engine ready for it soon

lancer - coming together, just need a clutch, some more white paint and time to keep swapping parts from shell to shell!

Waiting on a brake seal kit and a clutch line to get my car regoed.

Something else is bound to go wrong as everything that could go wrong has gone wrong, but its practically a new car now as ive replaced nearly every nut and bolt in it!

Picked up the 32 this morning after getting the 1/4 window fitted. It will do for now but cant say im impressed with the finished job so once the car is tuned it will be going somewhere else to be done again.

I just pray that it doesn't break :D

  • 2 weeks later...

well finaly got my hands on hold of a R34 PFC and some split fires, getting 040 on pay day as well, on the look for a boost controller duel stage or EBC, then to hobart for tune and finally get the body kit fitted :huh:

I had Sam (Dr Drift) tune my car on his dyno the week before power cruise.

So I'm now running a fully tuned PowerFC with optional boost controller, Z32, Splitfire Coil packs, 550cc Injectors and a HKS GT-RS :D Cant wait for the weather to get cool for some more ponies!

I'm also running no front bar due to an incident with a guard rail in the wet :D:down:

Edited by Az_StrYdeR

Ended up pulling 244rwkw's flat, and it was pretty hot that day too.

Nice an responsive, very happy with it. Think I'm going to need new shoes soon though :) love's 4k

Edited by Az_StrYdeR

Jase, got a link to this ECU?? I read a bit about it in the Stag section but still vague on it. And is yours a S1 or S2? We have $2.7k coming from Uncle Kev soon..... :blush: Might be an option for, ummmm, fuel economy? :D

Cheers, Greg.

Looks great Ian, i hope you keep this one for a little while and enjoy :(

My car is ready/waiting to be tuned so hopefully i can sell it soon so i can start my new project....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...