Jump to content
SAU Community

Recommended Posts

what date is the baskerville hill climb? its not that cove hill route is it..?

mite grab some new tires and come along.

Only thing is, looking into my crystal ball, just now, its looky cloudy.... wait.. RAIN lol

whats the requirements for the tas hill climb series?

ie, licences etc and car requiremnets. Usual stuff like tow hook marking, battery marker? and or kill switch?

Just wanna know whats involved before I lay down coin on tires etc

good helmet, cams 2s license (which goes hand in hand with a CAMS approved club) fire extinguisher , battery sticker thats about it lol they usually recommend secondary bonnet restraint but at CV i was just using normal latch ones. if i dont run basky HC (which is looking like im not atm with the cars issues ) you can borrow my helmet jack :blush:

Edited by Funz

Blue 150mm sided triangle to mark battery location

Metal Valve caps

No fluid leaks

Fire Extinguisher with Metal Bracket

Helmet that meets AS1698-74

Good seatbelts (Not UV damaged or frayed)

Good throttle return spring/mechanism

Treaded tryes. ie: if they bald to start with then no run.

I could go on but they are the basics.

and yes I did do all the relevant training and assessment's to be a CAMS Scrutineer, just waiting on the Licence to arrive in the mail. :blush:

arh good well all thats a check. I'm a current member of HSCC just gotta work out the 2S or 2NS licence or whatever.

oh and re the helmet, thanks adam, but all sorted. cheers

Edited by Mr. Untouchable

Well, took three days in the end but...

Entire rear end has been removed, subframe bushes all pressed out and new Nolathane bushes fitted in their place and got back on the road Monday night.

I have to say that for such a small change, 4 bushes, its made such a difference to the way the car reacts and drives.

Bring on Basky I say, enry went in the mail today, scrutineering tomorrow.

just got my 33gtst back, made 270rwkw on a steady 15pound, do another 1000k's then re-tune at Advan in sydney and run 25pound. hoping to get over 330rwkw. and building a 3L t51r SPL motor hopefully going into a 34gtr. got the bottom end and turbo. YAY!

Well, took three days in the end but...

Entire rear end has been removed, subframe bushes all pressed out and new Nolathane bushes fitted in their place and got back on the road Monday night.

I have to say that for such a small change, 4 bushes, its made such a difference to the way the car reacts and drives.

Bring on Basky I say, enry went in the mail today, scrutineering tomorrow.

Sounds like your alot closer than me PJ, my engine hasn't even turned up yet so looks like i wont be making Basky at this stage :banana:

It has given me plenty of time to clean up a few other things with the car though but this weather is killing me with no garage to work in ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Robertson was a Canadian inventor, and it absolutely reigns supreme here. 95% of our screws are Roberston. It's literally the only option you can buy off store shelves. What would it have lost out too? I believe it's also very popular in the US.  My reference to imperial was pointed to both NPT and BSP. 
    • No. BSP lost to the cultural/technical imperialism of living next to Trumpistan. Face it, Robertson screws were better and still pretty much lost out to the yank stuff. The Europeans hate the Brits and they don't use NPT. NPT is just as "imperial" as BSP is, being based on those useless inch thingos. Just done differently. 
    • I live in Quebec. Our license plate slogan is "Je me souviens" Translated is "We will remember" as a reminder to when England conquered us and that we must never forget what they did. Long story short, BSP is unheard of here due to being an English design. I'm surprised our nazi anti english government office the OQLF hasn't kicked in my door yet just talking about it, yet alone imperial anything.       
    • Thanks for that! I did a quick Google search looked up some of hydaulic stores and didn't see it listed on the website, I'll give them a ring. Also found out later that I can buy 2 oem bleeder bolts for 10 bux and come with the washer which I might do so I don't waste the money it costs in petrol to find 2 washers (already did that lol). The old copper washes look in good nick, I drove it after taking it off and putting it back on and didn't see any  Part number here for reference if anyone needs: 14053-42L0A  
×
×
  • Create New...